How should we identify Master Data for a particualr module.

HI SDN,
In an implementation scenario, suppose I am doing 1 standard cube. How do I identfy, the necessary Master data required for this cube.
Is there any specific stategy on which I can safely assume that I have identified and loaded the required master data for the particular infocube.
Regards,
Nitin

Hi Niteen,
While designing your infocube you will have a set of characterstics and key figures.
For characteristics you need to check if they are being used in other infocubes as well, or you nered text for them or not.
Judging on these parameters you can select which all characteristics in your cube need master data.
Regards.

Similar Messages

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

  • How to Load the Master Data for custom defined Z infoobjects?

    Hi Gurus,
    This is the requirement.
    Some screen enhancements has to be made by adding  new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
    Please someone throw some light on this problem.
    Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined  Z infoobjects ZNAME AND ZCITY in BW.
    Please help me out.
    Thanks is Advance,
    Regards

    you can by creating generic datasources on thoase tables with Full load or delta.
    if the number entries is less.. you can try full load...
    if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
    all the best.
    Nagesh Ganisetti.

  • MDM for Managing Master data for PP & QM Modules

    We have studied the various offerings of SAP MDM for Materials, Suppliers, Financials
    These are definitely areas where we would like to automate using MDM  and thereby improve Quality, Turn around Time and eliminate errors, redundancy etc.
    In these  areas we have also succeeded to a some extent in controlling the maintenance process by way of centralizing and building checks and controls in the Configuration of different Modules.
    The main pain areas in terms of Master data have been in PP and QM Modules
    PP-   Maintenance of BoM and Recipe - which is based on process package finalized by R&D Section.
    R&D scientists are not so familiar with SAP and SAP Settings
    Process Package is usually a simple document- defining specific quantities of the different components required to produce a Specific quantity of a Product  and also descibles the procedure of the entire production process, but when it translates into a Recipe and Bom- different tables in SAP come into play.
    Eventually the BoMs and Recipes are created by manual input of information from the R&D Process Package
    Similarly the QM master data  - Inspection Plan in SAP -  is based on Specification finalized by the Quality wing of R&D
    R&D scientists are not so familiar with SAP and SAP Settings
    Specification  is usually a simple document defining the different tests to be performed for inspecting a material and the expected range in which the results should fall in order for the material to be accepted- but when it translates into a Recipe and Bom- different tables in SAP come into play.
    Eventually the Specifications are created by manual input of information from the R&D Process Package
    There is no direct relation between the original R&D Document and the SAP Master data- Verification is a laborious manual process.
    We are wondering whether SAP MDM would have the scope to cover these two areas
    Tks

    Hi Hari,
    If I understand correctly,you are doing a feasibility study about and trying to find out if standard offering in SAP MDM supports your requirement of linking the master data and R&D documents.
    If thats the case I guess you can design a solution based on your business requirement.For this you can either create a custom repository or extend the currently offered standard business content.You can link the documents to the master data,also store these as pdf/image/links etc.
    Thanks,
    Ravi

  • Identifying master data datasource for standerd DSO

    Hello Experts,
    I am in a process to upload a transaction data into a standerd DSO named "Shopping Cart" from SRM source system.Please let me know how I can identify what is the master data required to be uploaded before uploading transaction data.
    Also let me know general process for identifying master data for any standerd infoprovider.
    Regards,
    Mandar.

    Hi,
    You might need some of these listed below. I have worked with Bidding Engine part and we needed the Purch org, Purch group, Status texts MD datasources. Check in the Shopping cart flow (rules) if there are any lookups on MD objects. In such case you would need to maintain MD for those.
    http://help.sap.com/saphelp_bic735/helpdata/en/f7/62a43c24358d15e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/5b/63a43c24358d15e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/77/62a43c24358d15e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/49/f2783b3aef6f17e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/80/cc943cfbbf3478e10000000a114084/content.htm

  • How to Lock the master data. R/3 Conflict ESS

    Dear Gurus,
    Please guide me how to lock the master data for a nos of days(say 7 days).
    Recently we had encountered an issue, related to ESS. While Uploading the Time data through t-code: PT60, our core team encountered a problem, that such and such employee number is locked.
    While checking, they identified it, system shown error against those employees, who are accessing their ESS. We check and came to know they are accessing the master data by changing their personal record i.e. address.
    Do we have any other provision to lock the master data without setting the control record to release for payroll.
    Please help .

    Create a custom transaction involving a custom views of table T7XSSSERSRV  with the following field for each service
    "V_T7XSSSERSRV-ISDISABLED"
    when HR wants to lock it, the will enter this table and check this field.
    this will disable the servcies in the front end.
    Once the 7 days are over, HR will uncheck this field. this will re-enable the services in the froint end.
    Hope this helps.

  • Master Data for CRM Cubes

    Dear Experts,
    How to find the Master Data for the CRM Cubes for example I want to know the dependant master data for 0MKTG_C01 (CRM Lead Management) or 0CRM_C04 (Opportunities).
    Pleae guide me.
    Edited by: Sai Phani on May 3, 2011 10:16 AM

    I don't know if this can be directly linked, but if you are interesetd for leads is used business object BUS2000108 and for opportunities 2000111. About basic tables it is easy. All objects use main table CRMD_ORDERADM_H and then there are specific tables for different objects, like for leads it is CRMD_LEAD_H and for opportunities is CRMD_OPPORT_H.
    Regards.

  • How to identify Master data chars in a cube?

    How to identify Master data chars in a cube? Is there any function module with teh help of which we can identify the master data objects in a cube. (I need to avoid manual checking as the no. of objects is more).
    Regards,
    R.Ravi

    right click on cube..click on 'display data model'..
    there expand the tree for each dimension..
    under it..u will see list of char in that dimension..
    for some characteristics u will see an arrow beside it..expand it..u will see further list of char..(with yellow icons)..
    these are the list of attributes for that particular characteristic..
    for char that have no attr..there will be no arrow beside it..
    by this..u can know which char in ur cube hold master data..
    Vishvesh

  • How can I upload text master data for attribute-only Charactertic?

    I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
    How can I upload text master data for attribute-only Charactertic?
    Thanks!

    Hi roberto,
    I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

  • How to know which master data objects need to activated  in R3

    SALES OVERVIEW CUBE -0SD_C03
    How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
    its very urgent please advise.
    R/3 in RSA5
    Sales Master Data
    0ACCNT_ASGN_TEXT               Account assignment group for this customer   
    0ACCNT_GRP_TEXT                Customer account group                       
    0BILBLK_DL_TEXT                Locked                                       
    0BILBLK_ITM_TEXT               Billing block for item                       
    0BILL_BLOCK_TEXT               Billing block in SD document                 
    0BILL_CAT_TEXT                 Billing Category                             
    0BILL_RELEV_TEXT               Relevant for Billing                         
    0BILL_RULE_TEXT                Billing rule                                 
    0BILL_TYPE_TEXT                Billing Type                                 
    0CONSUMER_ATTR                 Consumer                                     
    0CONSUMER_LKLS_HIER            Consumer                                     
    0CONSUMER_TEXT                 Consumer                                     
    0CUST_CLASS_TEXT               Customer Classification                      
    0CUST_GROUP_TEXT               Customer Group                               
    0CUST_GRP1_TEXT                Customer Group 1                             
    0CUST_GRP2_TEXT                Customer Group 2                             
    0CUST_GRP3_TEXT                Customer Group 3                             
    0CUST_GRP4_TEXT                Customer Group 4                             
    0CUST_GRP5_TEXT                Customer Group 5                             
    0DEALTYPE_TEXT                 Sales Deal Type                              
    0DEL_BLOCK_TEXT                Delivery block (document header)             
    0DEL_TYPE_TEXT                 Delivery Type                                
    0DISTR_CHAN_TEXT               Distribution Channel                         
    0DIVISION_TEXT                 Division                                     
    0DLV_BLOCK_TEXT                Schedule line blocked for delivery           
    0DOC_CATEG_TEXT                SD Document Category                         
    0DOC_TYPE_TEXT                 Sales Document Type                          
    0INCOTERMS_TEXT                Incoterms (Part 1)                           
    0INDUSTRY_TEXT                 Industry keys                                
    0IND_CODE_3_TEXT               Industry code 3                              
    0IND_CODE_4_TEXT               Industry code 4                              
    0IND_CODE_5_TEXT               Industry code 5                              
    0IND_CODE_TEXT                 Industry code                                
    0ITEM_CATEG_TEXT               Sales document item category                 
    0ITM_TYPE_TEXT                 FS item type                                 
    0KHERK_TEXT                    Condition Origin                             
    0MATL_GRP_1_TEXT               Material Group1                                         
    0MATL_GRP_2_TEXT               Material Group 2                                         
    0MATL_GRP_3_TEXT               Material Group 3                                         
    0MATL_GRP_4_TEXT               Material Group 4                                         
    0MATL_GRP_5_TEXT               Material Group 5                                         
    0MATL_TYPE_TEXT                Material Type                                            
    0MAT_STGRP_TEXT                Material statistics group                                
    0NIELSEN_ID_TEXT               Nielsen ID                                               
    0ORD_REASON_TEXT               Order reason (reason for the business transaction)       
    0PICK_INDC_TEXT                Indicator for picking control                            
    0PRODCAT_TEXT                  Product Catalog Number                                   
    0PROD_HIER_TEXT                Product Hierarchy                                        
    0PROMOTION_ATTR                Promotion                                                
    0PROMOTION_TEXT                Promotion                                                
    0PROMOTYPE_TEXT                Promotion Type                                           
    0PROV_GROUP_TEXT               Commission Group                                         
    0REASON_REJ_TEXT               Reason for rejection of quotations and sales orders      
    0REBATE_GRP_TEXT               Volume rebate group                                      
    0RECIPCNTRY_TEXT               Destination country                                      
    0ROUTE_TEXT                          Route                                                    
    0SALESDEAL_ATTR                Sales deal                                               
    0SALESDEAL_TEXT                Sales deal                                               
    0SALESORG_ATTR                 Sales organization                                       
    0SALESORG_TEXT                 Sales Organization                                       
    0SALES_DIST_TEXT               Sales district                                           
    0SALES_GRP_TEXT                Sales Group                                              
    0SALES_OFF_TEXT                Sales Office                                             
    0SCHD_CATEG_TEXT               Schedule line category                                   
    0SHIP_POINT_TEXT               Shipping point/receiving point  
    In BW
    Base Unit of Measure     0BASE_UOM
    Bill-to party                    0BILLTOPRTY
    Calendar Day                  0CALDAY
    Calendar Year/Month      0CALMONTH
    Calendar Year/Week      0CALWEEK
    Change Run ID              0CHNGID
    Company code              0COMP_CODE  
    Cost in statistics currency          0COST_VAL_S
    Credit/debit posting (C/D)            0DEB_CRED
    Distribution Channel       0DISTR_CHAN
    Division                                     0DIVISION 
    Number of documents    0DOCUMENTS
    Sales Document Category          0DOC_CATEG
    Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
    Number of Document Items         0DOC_ITEMS
    Fiscal year / period
    Fiscal year variant                      0FISCVARNT
    Gross weight in kilograms           0GR_WT_KG
    Number of Employees    0HDCNT_LAST
    Material                                     0MATERIAL
    Net value in statistics currency    0NET_VAL_S
    Net weight in kilograms 0NT_WT_KG
    Open orders quantity in base unit of measure 0OPORDQTYBM
    Net value of open orders in statistics currency 0OPORDVALSC
    Payer                            0PAYER
    Plant                             0PLANT
    Quantity in base units of measure 0QUANT_B
    Record type                   0RECORDTP
    Request ID                    0REQUID
    Sales Employee            0SALESEMPLY
    Sales Organization         0SALESORG
    Sales group                   0SALES_GRP
    Sales Office                   0SALES_OFF
    Shipping point                0SHIP_POINT
    Ship-To Party                0SHIP_TO
    Sold-to party                  0SOLD_TO
    Statistics Currency                    0STAT_CURR
    In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
    Thanks in advance,
       Bhima.
    Message was edited by: Bhima Chandra Sekhar Guntla

    Hi,
    <i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
    I think, you are looking for master data sources(text,attributes,hier).Am i right?
    If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
    Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
    With rgds,
    Anil Kumar Sharma .P

  • How to upload the master data from legacy to SAP

    Hi Frends,
    how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
    please clarify me
    Regards
    Sap Guru

    Hi ,
    use LSMW  or BDC for uploading Master & transaction data.
    This work is done by the Respective Functional team.
    Chandra

  • Open hub Services - How to extract the master data related to a object ?

    Hi Gurus,
    I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
    Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
    Can any one tell me how to get the master data extracted in the flat file with associated info object???
    Answers will be highly appreciated.
    Regards,
    Kironmoy Banerjee
    Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PM

    Hi Kironmay
    Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
    - Enter your infospoke in the edit mode.
    - On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
    - This will take you to the Addin implementation/BADI builder.
    - Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
    - The implementation of the BADI is always filter dependant.
    - In the properties tab of the infospoke enter your infospoke under the Filter specifications.
    If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
    - Activate your class
    - From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
    - Here you can enter the code
    - To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
    IF FLT_VAL = 'Your infospoke'.
        T_DATA_IN[] = I_T_DATA_IN[].
    Select zstd_cost from /bi0/pmaterial into table T_return
    For all entries in T_DATA_IN
    WHERE material = T_DATA_IN-material.
    ...Continue with your code.
    Append output from T_return to your output E_T_DATA_OUT
    - Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
    I hope this helps.
    Thanks.

  • How to fill the master data in ecc

    Hi,
             0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
    Regrads,
    devi.

    Hi Devi,
    Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data. 
    BDC and LSMW both are used for loading data into SAP system.
    Or ask even directly they can create in ECC.  If it is for your testing purpose, it is better to ask them to create master in source system .
    Thanks
    BVR

  • Add additional field in Vendor master data for VAT Reg. No.?

    Add additional field in Vendor master data for VAT Reg. No.?
    Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
    Current Settings:
    Country : LFAS-LAND1
    VAT registration no.: LFAS-STCEG
    I need to add one additional field for text information. Is this possible?
    Thanks you very much
    Luis G.

    If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
    In SPRO, go to:
    >Logistics-General
    ->Business Partner
    -->Vendors
    --->Control
    >Adoption of Cusomter's Own Master Data Fields
    and read the documentation provided there.
    You will need to implement following BAPIs
    Processing Master Data Enhancements: VENDOR_ADD_DATA
    Customer Subscreens: VENDOR_ADD_DATA_CS
    I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
    Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
    regards,
    Aabhas

  • How to create generic master data  datasource .

    How to create generic master data  datasource which utilises ALE change pointers for extraction of master data.

    Hi,
    For any master data lets say, Material Master, for this you need to create a view
    based on your requirement by selecting one or more tables into your view and
    keeping all the required fields in the view as viewfields and go to RS02 create
    generic data source, select the view option as source and put the view, save and
    activate, at the same time set the delta pointer as to whether Numericpointer/date/timestamp..this way you can create a generic DS then transfer the stru. and at the BW side replicate the source system..and so on..
    Hope this helps..
    Assign points if useful.
    Need further info revert..
    Cheers,
    Pattan.

Maybe you are looking for