How should we setup electronic signatures for tax preparers?

I'm confused with all of the options.  We'd like to start having our in house tax preparers sign returns electronically.  Once signed, they need to confirm no further changes will be made to the return.  They would like to then print the document, have the tax payer sign, then submit the return electronically.  I'm not sure this is the best option, but it is what they are looking at doing.  Any other tax preparers out there?  Any suggestions?
Thank you in advance.

Either.
I must confess to admit, I’m not sure which one would be better for my needs. As a beginner, I guess I’ll need something that’s easy to manage (for both myself and the company) while able to prevent users from signing as someone else.

Similar Messages

  • How to enter 2nd Electronic Signature?

    We recently instituted electronic signature for our Engineers using Acrobat X Pro and a third party certification. The plan is for the first engineer to sign the PDF document and email it to the second engineer for his signature and approval. The system works well when we convert a Word document to PDF, which shows the PDF Producer (File => Properties) as Adobe PDF Library. However, when we use an interactive Acrobat document generated by our publications department, it shows the PDF Producer as Adobe LiveCycle Designer ES 9.0. With the latter document, the first engineers can sign the document, but in the "Sign Document" dialogue box the "Lock Document After Signing" option is not available. As the result, the document is locked by the first person who signed it and the second person cannot sign it.
    Is there an option to select to enable the second person to sign the document if it is generated by Adobe LifeCycle Designer?

    George,
    Thank you for your reply. We ended up creating actual signature fields in Adobe LiveCyle on the documents and routed them to our engineers for their signatures. It worked great.
    Date: Wed, 2 Jan 2013 17:29:16 -0700
    From: [email protected]
    To: [email protected]
    Subject: How to enter 2nd Electronic Signature?
        Re: How to enter 2nd Electronic Signature?
        created by George Johnson in Security & Digital Signatures - View the full discussion
    I suspect you're dealing with a dynamic XFA form and attempting to place an additional signature, as opposed to signing a preexisting digital signature field. It should work if the form has as many digital signature fields as will be needed. It won't otherwise. Note that if the form is a dynamic XFA but it doesn't need to be (e.g., because you're not adding or autoexpanding fields at run-time), then you might be able to create it as a static XFA form and then users will be able to place as many signatures as is needed.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963577#4963577
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963577#4963577
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963577#4963577. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Security & Digital Signatures by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to create a new Condition for tax as VAT ( 4 % )  in SAP ? .

    Dear All ,
                           Pl guide that " How to create a new Condition for tax as VAT ( 4 % )  in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
    Thanx & deep regrads to all in adv.
    sap11

    In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if  it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
    If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
    Regards,
    Bhuvan

  • How should i setup my Alias iCloud email to be my the DEFAULT email?

    Is there is a way to setup my Alias iCloud email to be my the defualt email?
    Please advice
    Thank you in advance

    Thank you Roger for your quick responde, really appreciate it, however; this is not actually what am looking for, it helps though.
    Lets say for example that you create a new iCloud account and called ([email protected]) then later on, you created an Alias for that account and called ([email protected]).
    Now, the ([email protected]) is your default email account which you use to login through iClould.com, restore your i device and so on, however; you can't use your Alias email ([email protected]) for this things, because basically its not your default account.
    My question is, how should i setup ([email protected]) to replace ([email protected]) to be my default iCloud account?

  • How should I setup a SATA HDD on K8N Neo2 Platinum?

    I bought a 200Gb SATA hard disk (Maxtor 6V200E0). This is the first time I work with SATA HDDs.
    I plugged the HDD as I always did with an IDE HDD, and installed Windows XP -I have configured nothing-. The problem I'm experiencing is that sometimes Windows XP boots fine, and sometimes it doesn't. After the POST, the Windows Logo does never appear. I do not see anything.
    Reading the Manual, I believe to understand that no matter if you only have one SATA HDD, I should setup nVRAID in the BIOS. Is that correct?. If I configure the nVRAID in the BIOS and setup RAID 0, should this problem disappear?. How should I setup my SATA HDD?. Is it the same to connect it to SATA1/SATA2/SATA3/SATA4 controller?. Or should it be connected into SATA1 -just because there's only 1 HDD in the system-?.
    Thanks a lot!

    Yes, unfortunatelly there's a major issue with this kind of HDDs and nForce3&4 chipset based mainboards. I found the following article at the Maxtor web-site -I asked them to send me the firmware upgrade; standing by-:
    Question
    I have heard or read that Maxtor drives are incompatible with nForce3 or nForce4 chipsets, or that I need a firmware update to make a Maxtor drive compatible with the nForce chipset. Is this true?
         Answer
    Note: This solution is only to be applied to the listed products and only when used with the nVidia© nForce3© or nForce4© chipsets. If you are unsure as to which chipset you have, please contact your motherboard manufacturer or visit your motherboard manufacturer's website for clarification.
    Firmware updates are not upgrades. They offer no performance enhancements and exist only to provide specific compatibility resolutions. If you have a drive that is working properly in a computer, you do not need a firmware update.
    Do not use a firmware update that is not authorized directly by Maxtor as there are variations of firmware for different revisions of drives that can render drives inoperable if applied to the wrong drive.
    Applying firmware to a drive that is not authorized by Maxtor will void the warranty on the drive as this would be considered an unauthorized modification. Please see Maxtor's Limited Warranty Statement for more information.
    If your drive came inside an OEM machine such as a Dell, Apple, Gateway etc., do not apply a firmware update at all as this will void the warranty which is held by that manufacturer. Please contact your OEM vendor directly.
    The following issues have been identified with Maxtor SATA II drives and the nVidia nForce4 controller:
    Data Corruption: If you are experiencing data corruption issues, the problem is not with the hard drive firmware. Please visit nVidia's website to update to the latest nVidia chipset drivers to resolve this issue. Make sure to be familiar with your motherboard specifications as there are several variations.
    NCQ: If you are experiencing problems with NCQ (Native Command Queueing) please see nVidia's Knowledgebase ID 768 for more information with an issue nVidia is having with NCQ and the nForce4 chipset, and a forthcoming resolution. They also offer a solution to temporarily disable NCQ.
    No Detection: If you are experiencing a problem with your Maxtor SATA-II drive not being detected by your nForce3 or nForce4 host controllers at bootup:
    Note: This does not apply if your drive is connected to a non-nForce3 or nForce4 controller such as SIIG (Silicon Image), HighPoint, Promise etc. Many motherboards have multiple host controllers onboard so make sure you are familiar with your motherboard specifications and schematics.
    The drives affected are those listed in the following table:
    Model begins with:
    Code (Firmware revision)
    6B- or 7B-
    BANC1980
    BANC1B70
    BANC1BM0
    BANC1BY0
    BANC1E00
    6L- or 7L-
    BANC1G00
    BANC1G10
    BANC1G20
    6H- or 7H-
    HA431BW0
    6V- or 7V-
    VA111610
    VA101610
    VA131610
    VA141610
    Example of a drive label:
    Image
    To check your current firmware revision on the drive without removing it from the system, use the Powermax diagnostic CD. Drive model, Serial and firmware Revision is displayed in the upper right hand corner after selecting the drive to test.
    A firmware update to resolve this issue for Maxtor SATA II drives is available by contacting Maxtor Support. Please have the drive serial number and the Code number available, which will be listed on the top label of the drive itself.
    Firmware updates will be issued for those drives experiencing this problem only, not for experimental troubleshooting. Due to the nature of a firmware code update, a drive can be potentially rendered inoperable so it is critical that data is backed up first.

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • HT4436 how can i setup one account for me and my kids ?

    how can i setup one account for me and my kids ?

    One account each, or one account for all of you to share?
    Either way, follow the instructions here: http://www.apple.com/icloud/setup/
    Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

  • Electronic signatures for Quality Notifications

    We are on 4.0b system and thinking of implementing electronic signatures functionality for quality notifications. Since SAP standard does not have this functionality we are planning to use Enhancement QQMA0014, function module exit EXIT_SAPMIWO0_020.
    To this effect, we are requesting your guidance for the following
    1.Is this customer exit available in latest version of SAP ?
    2. If we store these signatures (user id , date and time) in an custom table, can we move this custom table ,once we upgrade to a higher version.
    3. Is there any other way to implement electronic signatures for quality notifications in version 4.0b.

    Hi Isabelle,
    Thanks for your patience in understanding my question.
    My primary worry is if i use this exit to have electronic signatures in 4.0b and i know this functionality (Electronic  signatures) is standard in latest versions, what will happen to the electronic signature data that i create until i upgrade.
    The electronic signature data is the user id , date and time associated with a notification. I plan to store this in a custom table.
    I will appreciate , if you can share with me your analysis.
    Thanks
    Manoj Jain

  • HT3529 How do I set a signature for text messages?

    How do I set a signature for text messages?

    You can set a signature in Mail but not in Messages.

  • How do u set a signature for text messages

    how do u set a signature for ur text mesages

    As mentioned, this isn't possible. A (bad) workaround is to write a signature in the notes and copy it to your clipboard by double tapping and using the handles to make a selection and then hitting copy. Then whenever you send a text double tap and hit paste.

  • How to put an electronic signature with numbers?

    Hi everybody, i want to know how to put an electronic signature with numbers?
    Thanks

    See more like this to right of screen
    https://discussions.apple.com/message/24846549#24846549

  • How should I download iOS 8 for my iPhone 5s?

    How should I download iOS 8 for my iPhone 5s?

    If you typically sync your iPhone to a Computer with iTunes than that would be a good first place to start.  As you would know, once your iPhone is connected via the lightning / USB cable to the Computer and iTunes is open you can click on the box that says "iPhone" and you will go to the Summary page on the computer screen and it will say that iOS 8 is available.  Just click to Update.  After a few seconds it should give you an estimated time to complete the Download (but not the time of the complete install process).  Alternately you could just go on your iPhone 5s to Settings>General>Software Update and see if it says iOS 8 is Available to Install.  Click to Update and just set the iPhone down in front of you and watch as it goes through the process.  Either way should work fine.

  • How to make a DKIM signature for outgoing messages in Thunderbird (SMTP-server does not support DKIM)?

    SMTP-server does not support DKIM signature.
    How to make a DKIM signature for outgoing messages in the Thunderbird?

    I'm not familiar with this particular use of the terminology.
    Thunderbird has S/MIME support built in. You can add PGP support via the Enigmail add-on. Both offer the means to sign and encrypt messages.
    I see add-ons to support the checking of DKIM-signed incoming messages, but haven't found any yet for signing.
    Is it something that an email client is entitled to do? The Wikipædia entry says
    <blockquote>Both modules, signing and verifying, are usually part of a mail transfer agent (MTA).</blockquote>
    and that means a server, as opposed to a client (MUA).

  • I am moving to another continent. How should I register and pay for Creative Cloud?

    Hi. I am currently living in Korea, but I am going to move to Germany soon.
    Then I might also work in different country in Europe later.
    Then how should I make a registration for Creative Cloud, and how should I pay?
    Please help me.

    Hi Alfred,
    I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
    1) Go to Start button>> Control panel>> Uninstall a program.
    2) Check if you see Browser safeguard there, if yes then uninstall it.
    3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
    -Ankit

  • Hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)

    hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)
    I would like to be able to quickly bounce down my mixes,  through the Zed outputs. 

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Maybe you are looking for

  • WLS 8.1 + MyFaces 1.1 = java.lang.IllegalStateException ?

    We are seeing an Exception from time to time on WLS 8.1 in a JSF application that looks like this: <Aug 1, 2008 8:02:36 AM CDT> <Error> <HTTP> <BEA-101017> <[ServletContext(id=1781688286,name=as_oo_webapp,context-path=/as_oo_webapp)] Root cause of Se

  • How to increase on(press) movie Clip value

    I have a variable at frame 1, var a=0; i have a movie clip and i am writing a code on it on(press){ a=a+1; trace(a); bt the tracing value is showing NaN, how can i increase that value ?? even if i am doing the same thing with button then its working

  • ArrayList concept

    Hi, I know how to add elements in ArrayList, My requirement is ArrayList al=new Arraylist(); al.add(12);//this is my requirement i need code for these method can u able to send successful code. I know we can add like this al.add(new Float(12.090909))

  • HT4623 mY APPLICATIONS WON'T UPDATE?

    I have 10 applications waiting to be updated.  When I press update all it goes back to screen showing all my apps.  The app store still show 10 apps waiting to update.

  • ITunes movies will not play; blank window.

    I recently purchased several HD movies from the iTunes Store (~$15.00 or more each), and now I've discovered they will not play on my MacPro (I do not own a TV.) When I click the movies a separate window opens (as usual), but it remains black and not