How soon for new BIOS with Higher Voltage?

This is mostly directed toward moderator Bas
Do you have any idea if MSI plans to give its users an option for higher voltage to the cpu in later Bios updates?
Does this board even support it?
I know that there are a lot of people asking the same question.
I am an avid overclocker and I know I am being limited extremely by this...
My RAM will past Memtest x86 all the way up to 250MHZ but as soon as I go to load windows it craps all over the place.
I wish there was some more information on this as if MSI isnt going to make this available I am going to have to go get another board :(
I also own another msi board the 865PE for my P4 Media system and it clocks great. It's a 2.4B to 3.15 no prob!
I have seen posts wth people getting the AMD64 3200+ to 2.6 and over with other boards that allow high Vcore such as the ABIT KV8-MAX3. In the post I saw the guy had his Vcore to 1.75. That would be great!
Anyone with knowledgable input would be greatly apprecited especially Bas.
Posts on other boards besides the Abit and gigabyte as far as clockable boards would be helpful too.
Happy Clocking!

We'll that makes mee feel a little better to to know that even a .1 step up in voltage allows the memory to get to 245. For me at least so far I dont even have to step up the voltage in the AGP and memory area. My OCZ ram in 2.9V stable while still under warranty but right now I am limted only by the Vcore.
It is good to know though that the Abit board doesn't allow for stepping up in those areas as of yet though cause once we do get a little more Vcore into our processors that will become more usefull down the road. Though if you say they slowly bring in more options for the Bios we can only cross our fingers for now until we can hear from MSI directly.
On Monday I am going to try and give them a call and see what I can get out of the tech support group.
I will post what reply they give me.
OVERCLOCKERS UNITE!!!
If we let em know what we want it may speed up the process a little!
At least 1.65 for the VCORE!
Love my A64 so far though. I would hate to have to get another board just to sqeeze out 20MHZ more but cha got to do what you got to do.
GO MSI GO

Similar Messages

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

HOW SOON FOR RAW UPDATES FOR SONY RX1R AND SONY RX100MII

HOW SOON FOR RAW UPDATES FOR SONY RX1R AND SONY RX100MII???????

Snowonder wrote:
Does the Sony image viewer application for mac work for RAW files?
Yes. Sony's Image Data Converter v.4 opens all Sony RAW file formats.
The Image that you see when you import a new Sony RAW file is a JPG that is included with the RAW file.

Unable to install itunes for new computer with windows 8

unable to install itunes for new computer with windows 8
states this app unable to run on this PC

Hello jgrn76,
It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
iTunes 11.1.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
If issues persist when trying to install it, I would try running through the steps in the article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Otherwise, would you mind elaborating a bit on what the error message says, word for word?
Thank you for using Apple Support Communities.
Regards,
Sterling

Hi, I recently got an iPad air. Singed in for new registration with cc details as I had no other option I already own an iPhone and also my husband owns one. Both have same Apple ID to sync with iCloud But after registering for iPad all free are charging

Hi, I recently got an iPad air. Singed in for new registration with cc details as I had no other option
I already own an iPhone and also my husband owns one. Both have same Apple ID to sync with iCloud
But after registering for iPad all my free apps are asking me to purchase those free apps. I have no idea what went
Wrong, please help.

You created the same Apple ID with the setup assistant on the new iPad Air - the same Apple ID used for the iTunes and App Store on your iPhone?
There is no charge for a free app regardless.

How Soon for Fidelity Amex CLI??

I was approved last week for the card with only $1k SL, tried to recon SL but was denied. I have cards that are much higher. How soon can I go for CLI and is it a HP? Thanks

jamesdwi wrote:
the goodnews you can apply for a CLI imediately but it will cost you a second HP. The bad news, a 1k approval doesn't bode well, since they are basicly saying we are willing to give you a chance, but we are only willing to give you the lowest limit possible. So it may be better to wait 6 months before trying.
From what I have seen they offer frequent 12+ month 0% BT deals so waiting won't mean losing out on BT offers. This^^^^^^....

Bought logic pro 9.1.7 online for new MBP with mountain Lion, but asked for serial number. Where could I get SN?

How can I get the SN for an online version of Logic Pro bought from AppStore?
Thanks!

good news. The trick is to delete the "logic pro 9" by dragging the App from Finder->Applications to trash bin, and re-doanload and re-install it again. Now it's happily downloading 19GB contents without asking for SN.
Thanks Pancenter for your message. This is is brand-new MBP with Retina display, and I didn't find or delete and reg file for logic. Simply delete the app under installation (not in the launch pad, see above) and re-install. It works for the 2nd try. It could be a SW integration bug.

How Much for New Logic Board?

So, I'm getting to thinking that my logisc board is once again gone. How much would they charge at an Apple store to just swap out my old tattered logic board for a new, or at least working one? And, how much for them to replace my broken CD drive? Or should I just spend the money i don't have for a new Macbook?

I don't know if this is something that all apple stores offer, but my local apple store offers a $300 flat repair fee for fixing any hardware problem,s as long as they do not stem from liquid or drop damage.
This also comes with a 90 day warranty that covers the machine in case of a repeat repair.
I would assume this is something that all apple stores would honor, so if you are sure it's the logic board and not some software issue, I would suggest going toyour local store and inquiring about this.
Hope that helps!

How to create new user with more than one default folder

hi
A new user created in OCS has only one default folder(Inbox).
I want to create new user with customized default folder.
for example:
a new user has more than one default folder(Inbox,Outbox,Draft,Dustbin...)
And also I want to automaticly enable the functions:
When sending messages, place a copy in Outbox
Keep message drafts in Draft
Move deleted messages to Dustbin
who know that?
thanks

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

Create/extend materials for new plant with new profit centers

Hi.
We have created a new plant and want to create/extend the materials from an existing plant to the new plant (with new profit center). Can this be done via MM17?
Regards,
Kjettern

Hi Kjettern,
To extend the existing material to a new Plant/Profit centre, pls follow the following steps: -
1. Copy down the material number (i.e XYZ) you want to extend.
2. Go to t-code MM01.
3. Enter the material number (i.e. XYZ) you copied from (1) into the Material field and hit ENTER.
4. You will get an information on the bottom that "the material type XXX and the industry sector YYY has been copied from master record".
5. Pls note that Basic Data 1 & 2 is not changeable as the same set of material data will be used when a material is extended.
6. Hit ENTER again. To change other details other than Basic Data 1 & 2, select the views that you want.
7. You will be prompted to enter a Plant. Here you must enter the new Plant that you want to extend the material to and hit ENTER.
8. You will get a confirmation stating that the material already existed and will be extended (to the desired Plant u entered in (7)).
9. Ensure that all the data in all the important tabs are maintained, for the right Storage Location, Warehouse Num, Moving Average Price, Standard Price etc. before proceed further.
10. Hit Save. You will get a msg that "Material XYZ created".
Now you are able to use this material number in the new Plant you created.
Hope this helps.
Rgds.

How to create new database with rman backup

hi,
i took a rman backup with nocatelog. can i make a new database with that rman backup.
if yes then how ? i m using oracle 9i.
thxs

'NEW' doesn't seem to be the right word here, but you can DUPLICATE (clone) an existing database or restore it to a new host:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/toc.htm
Werner

HP Director software needed for new computer with windows 8

I have a Deskjet 5510 and went from Windows XP to a new computer with Windows 8 (64 bit). The driver installed when I plugged the printer in, but I haven't been able to find HP Director to install. I tried to do an install from the website, but it just told me that the driver was already installed correctly. The Director is a pretty important piece of the printer, can I get it back?

Hi, due to the age of the printer HP does not support 5510 in Win8.
Take a look at this link for further info & workarounds.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Rarcrack - how long for the file with 400 MB ?

Hi everyone
I'm trying to get the password in the encrypted file with 400 MB. It's more time I thought.
If someone have used the program, rarcrack, can you tell me know that get the password with special characters ?
For example:
The encrypted file with 400MB + the passwords "?_123_123_abc_@theworld".
How long for that ?
Thank you very much.
Last edited by luckybc (2014-12-26 06:29:07)

Does rarcrack know how long the pass-phrase is or not?
Also, are you using a dictionary/removing obvious choices of pass-phrase to help speed up the process OR are you brute-forcing every single pass-phrase from the ASCII alpha-numeric alphabet + punctuation?
TL;DR: Assuming I've done the Maths correctly, a damn sight longer that you might have thought
Since you haven't said, I'm going to assume YES to the first question and I'm assuming you're brute forcing, to make the maths simpler.
For one character position you're looking at about 26 lower case + 26 upper case + 10 digits + 10 punctuation marks of some sort. So that's 72 characters. You've got 22 characters in the passphrase, so that's a potential of 72^22 = 7.26632672153 x 10^40 pass-phrase combinations.
Now let's assume you're doing this on modern hardware, with an SSD on a single machine which can process something at the rate of 200MB/s. That's two seconds a pass. That'll take you about 2.01842408931 x 10^37 hours.
Disclaimer: I'm working off the assumption that encryption has been used, and that rarcrack would decrypt the whole file on each attempt (pass-phrase protection and encryption are different things...). I don't actually know how it works, but for those that do know how it does, you can probably work out the time from the number of pass-phrase combinations.
Last edited by clfarron4 (2014-12-26 12:01:20)

How long for new apps for review and approval by apple?

Hello there; was wondering if for a new apple developers' account, how long for a brand new app review? We submitted ours 6 days ago and wondering how long until the app gets reviewed and once in review mode, how long before approving it on the app store? Our app has been thoughraly QA'd and developed according to the Apple standards and recommmendations. Thank you.

When i uploaded my application it took around 12 working days, If there is any problem in the app, apple team will send you the error to the mail.

Mail crashes when checking for new mail (with crashreport)

Hello everyone
Can someone shed light on this crashreport?
The crash happens everytime Mail.app tries to download new mailmessages.
Process: Mail [320]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: 3.1 (914)
Build Info: Mail-9140000~1
Code Type: X86 (Native)
Parent Process: launchd [158]
Date/Time: 2008-02-10 09:00:25.820 +0100
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 19
Thread 19 Crashed:
0 libSystem.B.dylib 0x935a647a __kill + 10
1 libSystem.B.dylib 0x9361d782 raise + 26
2 libSystem.B.dylib 0x9362cd3f abort + 73
3 com.apple.MessageFramework 0x0046b8ce sqlite3_traceCallback + 0
4 com.apple.MessageFramework 0x003631ba +[Library insertOrUpdateMessages:withMailbox:fetchBodies:isInitialImport:oldMessagesByNew Message:remoteIDs:newDocumentIDs:setFlags:clearFlags:messageFlagsForMessages:cop yFiles:progressDelegate:updateRowIDs:] + 2261
5 com.apple.MessageFramework 0x00466efe -[LibraryStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:newDocumentIDsByOld:f lagsToSet:forMove:error:] + 767
6 com.apple.MessageFramework 0x003e8803 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:flagsToSet:forMove:er ror:] + 92
7 com.apple.MessageFramework 0x00386090 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:flagsToSet:forMove:] + 85
8 com.apple.MessageFramework 0x00386035 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:flagsToSet:] + 77
9 com.apple.MessageFramework 0x00385fe2 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:] + 70
10 com.apple.MessageFramework 0x00385f96 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:] + 63
11 com.apple.MessageFramework 0x00385f51 -[MessageStore appendMessages:unsuccessfulOnes:] + 56
12 com.apple.MessageFramework 0x00360330 -[MessageStore finishRoutingMessages:routed:] + 388
13 com.apple.MessageFramework 0x003edcf6 -[MessageRouter routeQueuedMessages] + 953
14 com.apple.CoreFoundation 0x938d7b9d _invoking__ + 29
15 com.apple.CoreFoundation 0x938d7588 -[NSInvocation invoke] + 136
16 com.apple.MessageFramework 0x003d0a05 -[MonitoredInvocation invoke] + 409
17 com.apple.MessageFramework 0x003d18c7 +[WorkerThread _execute:] + 144
18 com.apple.Foundation 0x9393804d -[NSThread main] + 45
19 com.apple.Foundation 0x93937bf4 _NSThread__main_ + 308
20 libSystem.B.dylib 0x93569075 pthreadstart + 321
21 libSystem.B.dylib 0x93568f32 thread_start + 34
Here is another crash from thread 17:
Process: Mail [492]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: 3.1 (914)
Build Info: Mail-9140000~1
Code Type: X86 (Native)
Parent Process: launchd [158]
Date/Time: 2008-02-10 09:36:19.146 +0100
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 17
Thread 17 Crashed:
0 libSystem.B.dylib 0x9361967e _semwait_signalnocancel + 10
1 libSystem.B.dylib 0x9360b547 usleep$NOCANCEL$UNIX2003 + 61
2 libSystem.B.dylib 0x9362cd4b abort + 85
3 com.apple.MessageFramework 0x0046b8ce sqlite3_traceCallback + 0
4 com.apple.MessageFramework 0x003631ba +[Library insertOrUpdateMessages:withMailbox:fetchBodies:isInitialImport:oldMessagesByNew Message:remoteIDs:newDocumentIDs:setFlags:clearFlags:messageFlagsForMessages:cop yFiles:progressDelegate:updateRowIDs:] + 2261
5 com.apple.MessageFramework 0x00466efe -[LibraryStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:newDocumentIDsByOld:f lagsToSet:forMove:error:] + 767
6 com.apple.MessageFramework 0x003e8803 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:flagsToSet:forMove:er ror:] + 92
7 com.apple.MessageFramework 0x00386090 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:flagsToSet:forMove:] + 85
8 com.apple.MessageFramework 0x00386035 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:flagsToSet:] + 77
9 com.apple.MessageFramework 0x00385fe2 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:newMessages:] + 70
10 com.apple.MessageFramework 0x00385f96 -[MessageStore appendMessages:unsuccessfulOnes:newMessageIDs:] + 63
11 com.apple.MessageFramework 0x00385f51 -[MessageStore appendMessages:unsuccessfulOnes:] + 56
12 com.apple.MessageFramework 0x00360330 -[MessageStore finishRoutingMessages:routed:] + 388
13 com.apple.MessageFramework 0x003edcf6 -[MessageRouter routeQueuedMessages] + 953
14 com.apple.CoreFoundation 0x938d7b9d _invoking__ + 29
15 com.apple.CoreFoundation 0x938d7588 -[NSInvocation invoke] + 136
16 com.apple.MessageFramework 0x003d0a05 -[MonitoredInvocation invoke] + 409
17 com.apple.MessageFramework 0x003d18c7 +[WorkerThread _execute:] + 144
18 com.apple.Foundation 0x9393804d -[NSThread main] + 45
19 com.apple.Foundation 0x93937bf4 _NSThread__main_ + 308
20 libSystem.B.dylib 0x93569075 pthreadstart + 321
21 libSystem.B.dylib 0x93568f32 thread_start + 34
Thread 17 crashed with X86 Thread State (32-bit):
eax: 0x0000003c ebx: 0x936191cf ecx: 0xb04520ac edx: 0x9361967e
edi: 0xa0499f00 esi: 0xb0452108 ebp: 0xb04520e8 esp: 0xb04520ac
ss: 0x0000001f efl: 0x00000247 eip: 0x9361967e cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x20496050
Thanks, hope someone can help me out with what to do.
Cheers Nikolaj
Message was edited by: nsode

Hello Barry
Thanks for your reply, it did the trick, in a weird sort of way:
After deleting the mail preference file as you suggested, I could check for new mail messages without Mail.app crashing all over the place.
However all my accounts and the messages in them was gone. Okay, one problem solved and new one created.
Solution: Reinstalling my wifes and my own mail accounts and reimporting all the messages from the backup. Sounds boring right?
So I threw caution to the wind and replaced the new preference file with the old one that I had kept in the (disabled) folder. Thinking that it was an easily reversible step.
And it ruddy worked! Now I can again check for new mail messages and I have the old mail accounts intact. The logic of this however escapes me.
The morale: Its a weird world sometimes;-)
Thanks again for your help, it is much appreciated.
cheers Nikolaj

How soon for new BIOS with Higher Voltage?

Similar Messages

Maybe you are looking for