How soon will the website log off

Hi....
Greetings........
How soon will the website log the user off, the application in case of no user activity ie the application is not use for long time?
so I want to know 1. how long the application(may be dashboard) is Idle
2. Is there any option to change the default log off time
Thanks in advance
Balaa

You need to be a bit more resourceful, you can't expect people to do everything for you. I don't know which websites your company blocks so I am not going to list all the language translators on the web to see which ones are and which ones are not. Ask a friend to visit the page and send a screen shot, visit the page from internet cafe or from your home internet connection. There are tons of ways to do it...

Similar Messages

I lost my iPad. Will the iPad log off my Apple id if i change my codename??

I lost my iPad. Will the iPad log off my Apple id if i change my codename??

Hi, Hjorte.
Thank you for visiting Apple Support Communities.
I am sorry to hear that your device is missing. Here are the best steps to go through when you run into this situation.
If you did not enable Find My iPhone on your missing device
If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/ht5668
Cheers,
Jason H.

*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
J

Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM

How to disable the archive logs in SAP IDES(Windows) using SQL Server

can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

HT5295 with so many having trouble with downloading podcasts including me how soon will someone take care of this,1 postings was 2 weeks ago,hey support what are you waiting for?

I see several people having the same problem of podcasts not loading and 1 was 2 weeks ago,so hey support how soon will this be fixed?

rdankovcik wrote:
IS there a forum that apple monitors?
No.
rdankovcik wrote:
So basically, you are saying that apple could care less about user feedback?
This forum is a user-to-user forum - it always has been. It is designed so that we users can help each other.
You have to remember that sometimes an entire thread can be wrong. Perhaps the people posting about Podcast problems are wrong. Certainly, there is one thread that has been going on for some time, but the people with the problem seem reluctant to try any suggestions put forward to them, especially if the suggestion includes the thought that Apple may not be the cause of the problem. I use Podcasts all the time and rarely have any problems.
Apple (by the way) is not the cause of every single known problem in the universe!
That said, if you have a problem with Podcasts, why not tell us here and we'll see if anyone can help you?

RMI listener stops whenever the user logs off Windows

Hi guys...
I have a problem whereby the RMI listener stops whenever the user logs off Windows.
I've gone through the net and the only solution was to add "-Xrs" to the end of the "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\IBM Tivoli Identity Manager Adapter" service for the ImagePath statement.
Unfortunately for me, that did not work.
Anybody knows how I can go around fixing this.
Much appreciated.

What's the RMI listener?
Do you mean the RMI Registry?
In which case the solution is to add that same flag when you run the registry.

TS3274 I am thiking of buying iPad to use it at school. Can I open textbook withought using WiFi? How much will the Internet fee be?

I am thiking of buying iPad to use it at school.
Can I open textbook withought WiFi?
How much will the Internet fee be?

What is your grade level? Most (many?) schools at the secondary and college/university level have wifi, so if using it at school you would be set there and if you have wi-fi at home, you should be all set, there, too. Having cellular can be expensive for what you get in terms of space, and depending on where you live, you might want to do some research to see what your best options are.
That said...
I had questions as soon as I read your post. Are all of your books available for ipad? Do you have a computer, because you'll need one, etc.(I know you're using one now...) If you do, then the ipad could work for you. My younger son is starting his junior year in college and he's getting an ipad for convenience. But he has an imac in his dorm room, so he'll be set. He knows that's more important for productivity than an ipad, but loves the idea that he can bring it to class for notes, put them on his imac for editing in microsoft office and excel, upload files he needs from classes, etc.
I opened a thread to the right on this page to see if there was information re these questions, and there are. There are also many threads where people have your same questions, and many have very helpful answers. The only thing is it might be time consuming. You might have to go way back to read them. There are so many questions asked 24/7 that a new question on this site might be ten pages back in a matter of hours. I don't do it often, but I check them out and and I've gotten some very helpful info. Take notes and perhaps what you learn can help you make your decision.
One thing I would skip as an option would be a netbook. They crawl... class would be half over before you'd get to start your note taking, and they are not powerful at all and have limited space even if you max it out with a larger hard drive. We bought two for my sons to take notes in college and don't use them anymore.
If you let us know more about your school level, specific situation, and why you want 4g, hopefully people can possibly help you better. All the best as you make your decision!

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

How do you get music from your Itunes to your computer? im making a wedding video on windows movie maker but cant figure out how to get the bridal music off my ipod and onto my pc.

Im making a wedding video and cant figure out how to get the bridal music off my itunes and onto my computer.. Im using the windows movie maker

Marian,
Let's be clear on one thing here. The manual setting is an iPod setting, not an iTunes one. So, once you've set it to manual (and you appear to have done that correctly), then you can connect it to any number of computers without changing that setting.
"The grey thing occurs on one pc only"
This is the thing that I don't understand, if your iPod is set to manual, then it shouldn't happen on any computer. If you connect the iPod that is set to manual to this pc, and then click on it in the source listing, then you would be looking at the songs on the iPod, and they should not be greyed out. When you connect to the "other pc" under these same circumstances, they are not greyed out?

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

How to get the current logged in username from windows and put it into an AS var

Hello,
I was hopeing someone would know how to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
Thanks in advance
Michael

Just for everyone’s info, this is the script I have used to get the logged in windows username into flash ---- not and air app.
In the html page that publishes with the .swf file under the <head> section:-
<script language="JavaScript" type="text/javascript">
function findUserName() {
     var wshell=new ActiveXObject ("wscript.shell");
     var username=wshell.ExpandEnvironmentStrings("%username%");
     return username;
</script>
The ActionScript:-
import flash.external.ExternalInterface;
var username:String = ExternalInterface.call ("findUserName");
trace (username); // a quick test to see it in output

Confition type FRC1- how to get the change log,

Hi,
When the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

Check in
m/06
go to utilities
change log
If not found consult BASIS consultant

How soon will the website log off

Similar Messages

Maybe you are looking for