How stay on the sreen list

Hi all,
  I have an output list where I have added two button in order to dowload
  two different files.
  When I push the first button everything works fine, but the program return to
the screen 0, whereas I have to allowed the user to push the second button
without processing the program again.
How can I remain on the list after pushing the fist button?
I thank You in advance.
Paolo.

Hi,
thank for your interest; this is the code:
FORM user_command.
  CLEAR: p_fdett, p_friep.
  CASE sy-ucomm.
    WHEN 'BACK' OR 'CANC' OR 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'FILEDETT'.
      p_fdett = 'X'.
      PERFORM output_dati.
    WHEN 'FILERIEP'.
      p_friep = 'X'.
      PERFORM output_dati.
  ENDCASE.
set screen ??
leave to screen.
ENDFORM.                    " USER_COMMAND
Regards

Similar Messages

  • How to use the Pull List in Discrete Scenario?

    Hi Gurus,
    I am using pull list MF60 in REM.
    How to use the Pull List for creating material reservations in Discrete Scenario also?
    Anyone used this Pull list in discrete, pl share.
    How is helpful in discrete scenario?
    Srini

    Hello,
    You can use Pull list for st.location transfers, if you are into WM managed then this pull list used a lot.
    You can use the pulllist to the max. extent. But with IM managed plant the use is limited and this is used only for storage location transfers.
    Issue cannot be done for Production orders. You can bring the materials to the req. storage locations and after that you have issue in the order or manually for the order.
    Regards,
    Manick.

  • How to get the whole list of Iview Templates

    Hi,
    when I navigate:
    Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
    I get a long list of templates including Url Iviews etc
    But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
    Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
    Thanks,
    Tomas.

    Hi Tomas,
    which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
    Normally, you will have to have SuperAdminRole to see/change these settings.
    Hope it helps
    Detlev
    PS: Please consider to reward points for helpful answers. Thanks in advance!

  • How to enable the full list of developer options on A806?

    How to enable the full list of developer options
    Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
    Edited & created a new thread.

    -Go to menu, settings,
    -about phone
    -scroll to the bottom and find "build number"
    -tap it 7 times (upon completion, it will say that you're a developer)
    -the menu is now near the bottom of the main settings menu (just above about phone)

  • How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

    How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform
    I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I have acquired by NI DAQ card, tks!
    owen wan
    Attachments:
    Untitled 1.vi ‏2333 KB

    Look inside the palette called Signal Processing - Waveform measurements.  There are a lot of functions here that you can use to get the information you desire.  For instance, the Extract Tones function will output an array of clusters, with each cluster element giving the frequency, amplitude, and phase of the signal component.  Go through the entire arry to see each frequency component of the complex waveform.
    Also, in the Waveforms palette there is the Get Waveform Components function that will give you t0, dt, and Y components of the waveform.  1/dt should give you the sample rate.  See attached VI.
    - tbob
    Inventor of the WORM Global
    Attachments:
    WfmInfo.vi ‏4658 KB

  • How to get the users list that can Add/Remove or modify Vendors in Oracle?

    How to get the users list that can Add/Remove or modify Vendors in Oracle?
    I need to generate a report like name and responsibility. Thanks

    That query gives the Supplier information.
    But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
    I assume it should be based on the Responsibility.

  • How to maintain the contact list in the phonebook when i change my sim card

    how to maintain the contact list in the phonebook when i change my sim card

    The SIM has not affect on the contacts in an iPhone. Unlike other devices, the contacts are not maintained on the SIM card.

  • HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    Welcome to the Apple community.
    Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

  • How to run the basic list in background to generate secondary.

    How to run the basic list in background to generate secondary and spool for the secondary.Please note that Basic list will run in foreground.

    Problem solved.

  • How to disable the Directory listing for the whole server or a particular a

    Please let me know how to disable the Directory listing for the whole server or a particular application.
    Thank You

    I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
    Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
    http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html

  • How to access the contact list before i had updated.

    how to access the contact list before i had updated IOS7.
    My contact list has gone now....

    I am not sure about the syncing problem, i just use my apple ID.....
    what should i do, if i didn't do the syncing step:(

  • How to find the WhereUsed List for a Business Object Event?

    How to find the WhereUsed List for a Business Object Event?

    Can anybody let me know how to get which
    Whereused  function will get the data from
    different Werks in multi-level?
    Any sample program please!!!

  • How to append the data list bod (JList)

    how to append the data list box (JList)
    Message was edited by:
    raju_2reddy

    For this you will need a nested internal table. such that each column of the internal table should be declared as another internal table.
    Try something like this :
    " Lets say that the type of table that will be returned by the function BOM is ty_ret_tab, then declare as follows
    types begin of ty_tab,
    c1 type table of ty_ret_tab,
    c2 type table of ty_ret_tab,
    end of ty_tab.
    data gt_tab type standard table of ty_tab,
            gwa_tab like ty_tab.
    Now the question is how many columns should you declare ? Because you said that in a loop you intend to call a function which will return a internal table and this internal table you need to store in a column of another internal table. And if this is not fixed, you would need to do some dynamic programming to achieve this.
    But if we assume that there are fixed number of columns and fixed number of loops, then within the loop, you wiill have to simply move the data from the returned table to each of the columns. Then append the work area outside the loop.
    data field(30) type c.
    data c_tabix(10) type c.
    field-symbols <fs> type ret_tab.  " this should be
    Loop at itab.
    call function BOM...
    exporting...
    importing.....
    tables  ret_itab.
    c_tabix = sy-tabix.
    concatenate 'C' c_tabix into field.
    condense field.
    assign component  (field) of structure gwa_tab to <fs>.
    <fs> = ret_tab.   " Pass data to each column
    endloop.
    append gwa_tab to gt_tab.  " Now a single record with all columns containing an internal table is built.
    Hope this pseudo code helps.
    BR,
    Advait

  • How can I make my Shuffle stay in the Source list with Version 7??

    No longer in the IPOD options that I can see????

    Blackstar,
    Unfortunately, for reasons unknown, the Keep this iPod in the source list option does not exist in iTunes 7.
    So the first thing you will probably want to do is let Apple know your feelings on the matter by submitting the form on this support page .
    Done that? Okay then, so now you'll probably want to make the best of the situation by figuring out if there's any kind of workaround to deal with the matter.
    The best I can come up with is suggest that you create a playlist dedicated to your iPod shuffle which, for discussion's sake, we can call the Shuffle Playlist.
    Once you have created that playlist, when you connect your shuffle to your computer you can drag the Shuffle Playlist into your shuffle.
    After disconnecting the shuffle you can get to work on modifying the Shuffle Playlist for your next update.
    Note that you will have to manually clear the iPod shuffle's contents before putting a new Shuffle Playlist on it.

  • How to delete the loadings list in the itunes store (1000 tunes are downloading with no reason)

    Hi
    I switched from an iPhone 4 to an iPhone 5c and now the itunes store app wants to download 1000 tunes (I guess it cannot try more) and it blocks.
    I don't know how to delete the list (not one by one of course .
    If someone has any clue to help
    Thanks

    Hi Francis,
    Check the BADI "TRIP_WEB_CHECK" method "USER_CHECK_GENERAL_DATA".
    Here based on the schema you can modify the "estimated cost" field.
    Hope it helps.
    Regards,
    Jyothi

Maybe you are looking for

  • Why final cut express wont read my avi file?

    Hi all. I am currently expreience some problem. Few days ago, i was shooting a video project with my D3s. My D3s shoots in AVI format. yet i dont know why the final cut express and the quick time only able to play and edit the avi file with sound? an

  • Multiple Endpoints Single Channel

    I am working on a project, that requires instancing of our flex application. One idea that I came up with was to allow for multiple urls to access the same data based on several variables. One key components for this idea to work is being able to use

  • The best way pass a goemetry to a procedure

    I need to pass a geometry to a stored procedure. I first thought of using the mdo.sys_geometry types but the java client cannot pass in this type of object. I then thought of using pl/sql tables to send in the sdo_element_info array and the sdo_ordin

  • Error creating Form Column Properties

    Hi all. I got a problem creating Form Additional Column Properties through OIM API. The point is next: I got an instance of Oracle Identity Manager 11g R1 (11.1.1.5) I'm making a tool for some OIM objects automatic generations, in particular it shoul

  • After Mountain Lion upgarde Safari won't open.  What should I do?

    I just finished the Mountain Lion upgrade on my iMac and now Safari won't open.  I get a Safari Quit unexpectedly message.  I had no issue with the upgrade on my Macbook.