How Stop a process in MSDOS

I use Host('net use ...); for some operations but i can't be closed with
Host('net use z: /delete', NO_SCREEN ); because a file is in use and the process net.exe is blocked...
I removed the NO_SCREEN and I saw that net.exe is blocked because MSDOS asked if I want to force the closure...[Y/N]?, there is any way to put YES directly from the forms?

Hello,
Make a small file that contains only O or Y followed by a carriage return. name this file, e.g. yes.txt, then give this file in entry to your host command
host('the_command < yes.txt');Francois

Similar Messages

How stop the process of a job program and no sent data to XI?

People,
I have a program that stop by a error message that I put after a select like this:
IF sy-subrc <> 0.
    v_error2 = 'E'.
    MOVE 'No data found. REGUH'(e01) TO emsg.
    PERFORM call_error_function USING emsg.
    PERFORM call_log_function.
    MESSAGE: 'No data found. REGUH'(e01) TYPE 'E'.
ENDIF.
For example if not exist data on REGUH display a error message and the program stop but the problem is that some of this programs are executed by a job and when present the error the status of the program are presented like CANCELED and I need to change the status to FINISHED but in the log present the tables with the message that no have data or something like that.
Other thing that I need is not sent the message to XI if no have data. I made that with the error message but now I don't know how!
Help me with this please!
Thanks!

Hi,
To send data from SAP to XI, you can use:
IDoc
RFC and Proxy.
For IDoc if you have no data then the IDoc is not created and hence no error needs to be processed.
For RFC and Proxy that you must be calling in your report:
1. First option is to check for the data before making a call to RFC or Proxy. If there is no data don't make the call
or if you don't get the data and you want to send a message that there is not data then you have to make another message and update this message and send it to SAP XI
Regards
Vijaya

How do i stop two processes that are running in activity monitor

how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

Select each one and Force Quit it.
But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
regards

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to stop a process?

last time i selected all the files in a folder and expected them to open in one Preview window, but each opened a window and it took a long time. When this happens, how can i stop the process immediately?

Quit the application using CMD+Q. If that doesn't work, OPTION-click the app's Dock icon, and select force quit.

How to stop a process in a process chain?

Hi
I've got a process chain that calls several processes. It's still running one of the processes but I want to stop the two that will run after (as it is now in the day time and they will impact on performance in our R3 system).
I've looked on SM37 but when I put in BI_* nothing comes up. Do anyone know how I can stop these processes from running before they start ?
Thanks in advance
Sandra

Hi Sandra,
Just goto the process types that are supposed to run afterwards... and rt click select released job-> select the job and press shift + F6 (from scheduled state to release state)
If u observe in PC now after refreshing this step will not be green (grey meaning not scheduled to run)
similar for other.
thanks

How to stop a process (that is executing)

Hi all
my question is How to stop a process that is executing ?
some other languages has a function called yield() in java how I can do it.
thanks

You can tell a Thread to yield - That is, cause the currently executing thread object to temporarily pause and allow other threads to execute.

How to stop a process in process chain

Can anyboday help , How to stop a process in process chain .
Thanks
PP

Hi Phani
In RSPC, Open the Meta Chain, In Process Chain Manu bar,
Select the option "Remove From Schedule"
Hope this will help you
Regards
Saravanan.ar

How to stop a process chain when its running?

Dear Experts,
How to stop a process chain when its running? is it that a chain can be stoppend when we open an info package of that chain ?
Thank you,
Raj

Hi,
Goto the main menu process chain --> choose the remove from the Schudule...
Regards
sathis
I hope it helps to u... please assign the points

How to Stop the process chain if it in the middle of the process?

Hi,
Is there anyway that i can stop the process chain if it is in the middle of the process already?
Raj

"Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Re: Kill a Job
Re: Killing a process chain.
How to stop a process in a process chain?
Regards,
JituK

How to stop the Process Chains?

Hi Everyone,
   I have a process chian which is running daily, but i want to stop in a particular day( for ex on wednesday).The process chain has to run on remaining days.So how can i stop the process chain on the particular day. Please do answer me.
Thanks
Veerendra

Hi Virendra,
After start process , insert a node of abap program and insert program with following code .
Report zntest.
data : lt_attr like CASDAYATTr occurs 0 with header line.
CALL FUNCTION 'DAY_ATTRIBUTES_GET'
EXPORTING
   DATE_FROM                        = SY-DATUM
   LANGUAGE                         = SY-LANGU
TABLES
    DAY_ATTRIBUTES                   = Lt_ATTr.
write : / lt_Attr-WEEKDAY_L.
read table lt_attr index 1.
if lt_Attr-WEEKDAY = '3' . "3 Stands for 3rd day of week i.e. Wednesday
message 'Process chains not to be run on wednesday' type 'E'.
endif.
Make sure that this ABAP program is linked to other processes only on "Success",
Hope that helps.
Regards
Mr Kapadia

How to stop the process chain on every saturday and delay until sunday 6 am

Hi experts,
We have a maintanence window on every saturday until 6 am on sunday.
My question: I don't see any option in the start variant of the process chain under restriction to stop the process chain on saturday and delay the run until sunday 6 am. Any idea?
Please let me know the steps. Thank you in advance.
Sharat.

how to create a event for a process chain? please let me know step by step instructions.
Also I will schedule the regular process chain until friday and use the new variant to schedule it on sunday at 6:00 pm right?
Thanks in advance.
Sharat.

Add a shared table into rules without stop any processe,How can I get error

I have a Single-Source Environment,and want to add a new shared table for replication.
Where I add capture rule,PROPAGATION rule and apply rule without stop capture process, propagation process and apply process,The replication will not process in this table ,and other replicated tables are OK.I can't find any error in the Environment,
While it done well when I stop these processess before add rules.
If this happened,How can I detect this failure?

Thanks for your reply!
But I find no error however
In Streams Replication Administrator's Guide,I find follow word's:
If you perform administrative steps in the wrong order, you can lose LCRs. For example, if you add the rule to a capture process rule set first, without stopping the capture process, then the propagation will not propagate the changes if it does not have a rule that instructs it to do so, and the changes can be lost.
I think it is the matter "lose LCRs",but how could I know whether LCRs are losing ?
thanks again!
Message was edited by:
xyz_hh
Message was edited by:
xyz_hh

How to stop threads, process, streams when closing a (internal) JFrame?

Dear all,
I read a Javaworld article about Runtime.exec(), which will output the process outputs and error outputs to either a file or System.out. Now I want to practice it by outputing the process output/error to a Swing JTextArea. It works fine if the process ends successfully.
My problem is that I want to stop all the output threads and clear all the streams when user click close JFrame button before the process finished. The code is shown below. Note that this frame is poped up by a click from another main frame. ( it is not exiting the main Swing application). This happened when I want to kill a process when it is running.
I tried to implements a WindowListener and add
public void windowClosing(WindowEvent e) to the JFrame.
Inside this method I used process.destroy() and errorGobbler = null, outputGobbler = null, or outputGobbler.interrupt(), errorGobbler.interrupt(). But all these seems does not work. Sometimes thread was not stopped, sometimes process was not destroyed (because the stream was still print out something), sometimes the error stream was not successfully closed - by printing out interruptted by user error message.
How can I make sure all the underlying streams and threads, including the PrintStream in StreamGobbler class are closed?
Again this Frame could be a Dialog or InternalFrame, i.e, when I close the frame, the main frame does not exit!
import java.util.*;
import java.io.*;
class StreamGobbler extends Thread
    InputStream is;
    String type;
    OutputStream os;
    StreamGobbler(InputStream is, String type, JTextArea out)
        this(is, type, null, out);
    StreamGobbler(InputStream is, String type, OutputStream redirect, JTextArea out)
        this.is = is;
        this.type = type;
        this.os = redirect;
    public void run()
        try
            PrintWriter pw = null;
            if (os != null)
                pw = new PrintWriter(os);
            InputStreamReader isr = new InputStreamReader(is);
            BufferedReader br = new BufferedReader(isr);
            String line=null;
            while ( (line = br.readLine()) != null)
                if (pw != null)
                    pw.println(line);
                out.append(type + ">" + line);
            if (pw != null)
                pw.flush();
        } catch (IOException ioe)
            ioe.printStackTrace();
public class Test extends JFrame
    private JTextArea output;
    private StreamGobbler outputGobbler;
    private StreamGobbler errorGobbler;
    public Test (String file)
        super();
        output = new JTextArea();
        try
            FileOutputStream fos = new FileOutputStream(file);
            Runtime rt = Runtime.getRuntime();
            Process proc = rt.exec("java jecho 'Hello World'");
            errorGobbler = new
                StreamGobbler(proc.getErrorStream(), "ERROR", out);
            outputGobbler = new
                StreamGobbler(proc.getInputStream(), "OUTPUT", fos, out);
            errorGobbler.start();
            outputGobbler.start();
            int exitVal = proc.waitFor();
            output.append("ExitValue: " + exitVal);
            fos.flush();
            fos.close();
        } catch (Throwable t)
            t.printStackTrace();
     setSize(400,400);
     show();
}Thanks !

Thread.interrupt() doesn't stop a thread. You'll have to read the API for more specifics. You could use something like interrupt to force interruption of the thread for the reason of checking the terminating case though. I believe you would want to use this in the case where operations can take a long time.
Setting your reference to the thread to be null won't stop the thread since it's running. You just lose your reference to it.
I believe once the thread stops running your streams will be closed, but possibly not cleanly. Someone who has more knowledge of threads might be able to answer this better, but I would generally say clean up after yourself especially if you are writting out data.

How Stop a process in MSDOS

Similar Messages

Maybe you are looking for