How stop the process of a job program and no sent data to XI?

People,
I have a program that stop by a error message that I put after a select like this:
IF sy-subrc <> 0.
    v_error2 = 'E'.
    MOVE 'No data found. REGUH'(e01) TO emsg.
    PERFORM call_error_function USING emsg.
    PERFORM call_log_function.
    MESSAGE: 'No data found. REGUH'(e01) TYPE 'E'.
ENDIF.
For example if not exist data on REGUH display a error message and the program stop but the problem is that some of this programs are executed by a job and when present the error the status of the program are presented like CANCELED and I need to change the status to FINISHED but in the log present the tables with the message that no have data or something like that.
Other thing that I need is not sent the message to XI if no have data. I made that with the error message but now I don't know how!
Help me with this please!
Thanks!

Hi,
To send data from SAP to XI, you can use:
IDoc
RFC and Proxy.
For IDoc if you have no data then the IDoc is not created and hence no error needs to be processed.
For RFC and Proxy that you must be calling in your report:
1. First option is to check for the data before making a call to RFC or Proxy. If there is no data don't make the call
or if you don't get the data and you want to send a message that there is not data then you have to make another message and update this message and send it to SAP XI
Regards
Vijaya

Similar Messages

How stop the automatic statistics collection job after the maintenance wind

Hi,
we are for a solution to stop the automatic statistics collection job after the maintenance window finished.
we disable all jobs except the automatic statistics collection, because this is the only one we want to run. Then we define specific values for the interval and duration parameters of the maintenance window to customize this task.
But for their systems it is very important that this job/task will immediately stop when the window is closed!!!
So, how could we ensure this behavior.
For Oracle 10g it is easy because the statistic job always exists and it is possible to set its duration and create an addtional event based job which kills all jobs that are running over duration.
In Oracle 11g the statistic job is created by the system during the maintenance window is open.
We are not able to modify parameters of this system job. After the maintenance window closed the job is already running - only with another resource priority - but it is running.
Please help me in this scenario
Thanks&Regards
Prem

?So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run, but i see tables are updated still the job is not running. I did >query dba_scheduler_jobs and the state of the job is true and scheduled. Please see my previous post on the output
Am i missing anything here, do i look for some parameters settings
So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run,GATHER_STATS_JOB will run and if there are any table in which there's a 10 percent change in data, it will gather statistics on that table. If no table data have changes less than 10 percent, it will not gather statistics.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#i41282
Hope this helps.
-Anantha

How to stop the process chain on every saturday and delay until sunday 6 am

Hi experts,
We have a maintanence window on every saturday until 6 am on sunday.
My question: I don't see any option in the start variant of the process chain under restriction to stop the process chain on saturday and delay the run until sunday 6 am. Any idea?
Please let me know the steps. Thank you in advance.
Sharat.

how to create a event for a process chain? please let me know step by step instructions.
Also I will schedule the regular process chain until friday and use the new variant to schedule it on sunday at 6:00 pm right?
Thanks in advance.
Sharat.

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to Stop the process chain if it in the middle of the process?

Hi,
Is there anyway that i can stop the process chain if it is in the middle of the process already?
Raj

"Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Re: Kill a Job
Re: Killing a process chain.
How to stop a process in a process chain?
Regards,
JituK

How to stop the Process Chains?

Hi Everyone,
   I have a process chian which is running daily, but i want to stop in a particular day( for ex on wednesday).The process chain has to run on remaining days.So how can i stop the process chain on the particular day. Please do answer me.
Thanks
Veerendra

Hi Virendra,
After start process , insert a node of abap program and insert program with following code .
Report zntest.
data : lt_attr like CASDAYATTr occurs 0 with header line.
CALL FUNCTION 'DAY_ATTRIBUTES_GET'
EXPORTING
   DATE_FROM                        = SY-DATUM
   LANGUAGE                         = SY-LANGU
TABLES
    DAY_ATTRIBUTES                   = Lt_ATTr.
write : / lt_Attr-WEEKDAY_L.
read table lt_attr index 1.
if lt_Attr-WEEKDAY = '3' . "3 Stands for 3rd day of week i.e. Wednesday
message 'Process chains not to be run on wednesday' type 'E'.
endif.
Make sure that this ABAP program is linked to other processes only on "Success",
Hope that helps.
Regards
Mr Kapadia

How to Stop The Process of oRecordSet.DoQuery()

Hi all..
I would like to ask 1 question.
When program is executing the query passed as a parameter to oRecordSet.DoQuery(), is there any way we can stop the process by clicking on cancel button or other events?
thx.
regards'
erwine

Hi all..
thx for your quick replies.
Coz currently im doing SDK module which requires to process alot of data..and the process of inserting and updating to DB is kinda complicated. So basically, i use transaction to start and when i encounter error, i will rollback.
Let's say if client run the program and suddenly realized that he/she gives wrong input and wants to cancel the whole process.What can i do? Client may say that button 'Cancel' is actually quite confusing because cancel is self-explanatory term to cancel process, but in SAP BO, it's actually to quit the form.
I once thought of using thread, however, the event to trigger thread to stop will have to wait until the process done. so it's quite complicated

How to stop the process for some time

I want to stop the process for some time can any one give the package or keyword or example for the same
For suppose two programs A and B.. .B will run based on output of A. What i need is... When A is executed the process will stop for 5mins then B has to execute...

You can use signals with DBMS_ALERT to "wake up" a procedure.
Procedure A is something like this:
DBMS_ALERT.REGISTER('B_FINISHED');
do logic...
when finished - send a signal
DBMS_ALERT.SIGNAL('A_FINISHED','B you can start');
now wait until B is finished
DBMS_ALERT.WAITANY(...)
continue logic hereAnd Procedure B is
DBMS_ALERT.REGISTER('A_FINISHED');
wait for a to finish
DBMS_ALERT.WAITANY(...);
do logic...
when finished, signal A it can continue
DBMS_ALERT.SIGNAL('B_FINISHED','A can continue');This is useful if u they need to wait for each other within the code. if they just need to wait - call B from A.
Hope this helps.
Edited by: Pyrocks on Nov 8, 2010 8:50 AM

Can we stop the process chain in middle of the process ?

hi experts,
Can we stop the process chain in middle of the process after scheduled.
my process chain is like start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
if it is possible what are the steps we fallow pl give me step by step procedure.
thanks & regards.
venkat

stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
for restarting, have a look at this blog.
Restarting Processchains
there he explains how to restart a stopped process chain.
Raghav

How can I stop the execution on a JSP page and start it again

Hi
I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
When a user does an update the transaction commits and releases its locks when the program executes
<%stmt.executeUpdate("commit!"); %>
I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
I have tried using the java.swing JOptionPane boxes but this didn?t work either
I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
Mette

I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
But the problem is how to get the code above to stop to illustrate I have set this lock.
I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
While (i < 2)
if( i==1)
%>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
else
stmt.executeUpdate(�commit�);
I am not using threads so I cannot use the sleep function.
I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
Thanks for your help
Mette

HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

Have been using Adobe CreatePDF for many months successfully.
Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
Tom.

I am still experiencing this problem. Customer service from Adobe has been abysmal!
I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
Note: This problem is happening always now, regardless of time being used.
Tom

Unable to open PS Elements 11 once closed without Stopping the process in Task Manager

Photoshop Elements 11 will not open once closed unless I either stop the Process in Task Manager or reboot the computer. I have tried setting the program to run in Administrator mode but this did not work. I am running the program on a 64 bit Windows 7 laptop, the process I need to close each time is usually "Photoshop Elements Editor exe*32'?"
Can anyone help me please?

I have this problem intermittantly with Premiere Pro and have not been able to find a solution.

Problem in stopping the process for a while

Hi all,
I am facing problem in stopping the process when i call *.exe from java. here i am explaning my problem in detail.
main(){
m1();
m2();
m1(){
Runtime r=Runtime.getRuntime();
Process p=r.exec("solve1.exe");
// this exe file will create a text file (temp.txt), and it is creating it with out any problem.
m2(){
using temp.txt here.
problem is when i call m1() it will create temp.txt , but by the time i call m2() temp.txt is saving into the disk and m2() is not able to find the file.
here what i need is there should be some time gap to before i call m2(); and i tried even with
p.waitfor(); in m1() -if i use this the program is not exiting out of runtime??
any one kindly hepl me
bye.

A test app(if you don't have sol, then pick another app)
public class WaitForTest{
    private WaitForTest(){
        try {
            Process p = Runtime.getRuntime().exec("sol.exe");
            System.out.println("Waiting....");
            p.waitFor();
            System.out.println("Done waiting") ;
        catch(Exception e)
                e.printStackTrace();
        static public void main(String[] args){
            new WaitForTest();
}

An error has occurred which stopped the processing of the PDF. Trying to convert a .tif file

I'm new to this conversion system. I tried several times to convert a .tif file to a .pdf file. I got the same message every time: "An error has occurred which stopped the processing of the PDF". What am I doing wrong?

Hi stefan235235,
I'm sorry that you're having trouble combining PDF files using Adobe PDF Pack. Does the error occur with all files that you try to combine, or just a select few?
Make sure that the files you're trying to combine aren't secured, password protected, 3D, or part of a PDF portfolio, as these types of PDFs can't be combined.
If you're combining supported file types and still getting that error, please try the following:
Log out and clear the cache. Then log back in to https://cloud.acrobat.com/combinepdf using a supported web browser (see System requirements | Acrobat.com).
Try combining smaller groups of files, to see if you can narrow the error down to a specific file or files.
Please let us know how it goes.
Best,
Sara

How stop the process of a job program and no sent data to XI?

Similar Messages

Maybe you are looking for