How the ASR memory options shipped when bought as spares?

Does anyone knows how the ASR memory options shipped when bought as spares?
Can i insert a 2GB memory on the ASR 1002-X as stated in the memory options in this link, http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/data_sheet_c78-441072.htmlIf yes, then what could be the part code number?
Can I just upgrade the ASR 1002-X from 4GB to 6GB of memory instead of 8GB?
Can you clarify if i will choose the following part codes, how will this be shipped?
M-ASR1002X-4GB=, 2 units 2GB memory or 1 unit 4GB?
M-ASR1002X-8GB=, 4 units 2GB memory or 2 units 4GB?
M-ASR1002X-16GB=, 4 units 4GB memory?
And last, how can we insert memory on the ASR 1002-X, does it needs to have identical memory installed for the 4 slots, or we can just upgrade it like, 2 x 2GB installed on the first slot and then i'll add 1 x 4GB?
Thank you!

Hello, Jessica.
The Cisco 1000 ASR series RP memory spares are usually sold as pairs. For example, 2GB (M-ASR1K-RP1-2GB=) are sold as a pair of 1 GB modules and the 4 GB memory spare (M-ASR1K-RP1-4GB=) is sold as a pair of 2 GB modules. It would be best to verify this with your Cisco sales representative. Are you already working with any Cisco partner or rep about this one, by the way?
Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

Similar Messages

Hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.

hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
thank you for any help!

Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care.

Hi,does anyone know how the Iwatch will play music when it is not near a bluetooth device as it is stated in the feature setting..Icloud streaming,internal hard drive?

Hi,does anyone know how the Iwatch will play music when it is not near a bluetooth device as it is stated in the feature setting..Icloud streaming,internal hard drive?

I did not hear them state the feature requirements directly in the streaming even but there are statements on the Apple website that clearly say that an iPhone is necessary. I'm guessing that other than Bluetooth for pairing with the iPhone, it's just not technically possible to fit any other radios such as WiFi or LTE into that form factor or battery capacity. I don't even remember them mentioning if it had a speaker or could pair directly with bluetooth headphones.
While I'm hoping that the watch has a reasonable stand-alone feature set, they didn't make it clear what exactly it can and can't do without an iPhone nearby. I also hope that they communicate this better in the coming days.

How to avoid the printer device option screen when calling smartform?

Dear gurus
i have create a smartform and i have called it from my program.
i dont want to show the printer device options how can i achieve that ?
below is the code for calling my smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'ZSNAK_VF03_PRINTING'
   IMPORTING
    fm_name                  = smart_form_function_nm
   EXCEPTIONS
     no_form                  = 1
     no_function_module       = 2
     OTHERS                   = 3
CALL FUNCTION smart_form_function_nm
    EXPORTING
      itab1              = itab1
      temp4              = temp4
      temp3              = temp3
      ref_doc_no         = ref_doc_no
      po_no              = po_no
      printno            = printno
    TABLES
      itab_tab           = itab_tab
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
Regards
Saad Nisar.

Hi,
check this link
smartforms -   print option
Regards and Best wishes.

How the columns retrive from datebase when u r using joins

Hi,
I am Seetharamaiah.c working in Xansa India Limited. I got a doubt . Pls clarify my doubt when we r retriving the data from database, how the colums retrieve when we r using self join. What exactly internally happen.
Thanking u,
Seetharamaiah.C

use set autotrace on
SQL> set autotrace on
SQL> select dname,ename
from dept d,emp e
where d.deptno = e.deptno;
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 NESTED LOOPS
2 1 TABLE ACCESS (FULL) OF 'EMP'
3 1 TABLE ACCESS (BY INDEX ROWID) OF 'DEPT'
4 3 INDEX (UNIQUE SCAN) OF 'SYS_C0063851' (UNIQUE)
Each row of the emp table is returned and the corresponding dept row is found using the index.
Introduce an outer join:
select dname,ename
from dept d,emp e
where d.deptno = e.deptno(+)
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 MERGE JOIN (OUTER)
2 1 SORT (JOIN)
3 2 TABLE ACCESS (FULL) OF 'DEPT'
4 1 SORT (JOIN)
5 4 TABLE ACCESS (FULL) OF 'EMP'
and you get two full table scans with the results merged to populate the dept with no emp records

How the longer-prefixes option works

take this link as an example
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfindp2.html#wp1022511
how can the longer-prefixes example used throw up the networks including 10.134.0.0
The following is sample output using the longer-prefixes keyword. When the longer-prefixes keyword is included, the address and mask pair becomes the prefix, and any address that matches that prefix is displayed. Therefore, multiple addresses are displayed.
In the following example, the logical AND operation is performed on the source address 128.0.0.0 and the mask 128.0.0.0, resulting in 128.0.0.0. Each destination in the routing table is also logically ANDed with the mask and compared to that result of 128.0.0.0. Any destinations that fall into that range are displayed in the output.
Router# show ip route 128.0.0.0 128.0.0.0 longer-prefixes
Gateway of last resort is not set
S 10.134.0.0 is directly connected, Ethernet0
S 10.10.0.0 is directly connected, Ethernet0
S 10.129.0.0 is directly connected, Ethernet0
S 172.30.0.0 is directly connected, Ethernet0
S 172.40.246.0 is directly connected, Ethernet0
~~~~~~~~~~~~~~
I can't see how the binary and can give this

Thank you Suda.
Could you please help me about how to access the links related to global parent update. I tried with my "S" number but it was not possible to access ... The message that I received was:
Error Message - Access denied (R/3)
What happened?
You do not have permission to access this Object
What can you do?
Please contact a consulting adminstrative
Error code: WEBSMP109-20080430234836-0015
Error details: 2491DD9-702/1A053/3162-71A9CFA5-3CB9265-2992F9
Service Name: SAPIDB
Service Server: WEBSMP109
Process-ID: 4268
Thread-ID: 4324
Sorry for any inconvenience.
Your SAP Service Marketplace Team
thanks!
Salomon Ponce

The space bar option disappears when I am typing in the IMAP in the incoming server I need the correct spacing, The space bar option disappears when I am typing in the IMAP in the incoming server I need the correct spacing

The space bar option disappears in the Incoming Server set up. I cannot type in IMAP: Port because I have no spacer options.

Thanks for your quick response. I am attempting to type in the Incoming Server box I need to type IMAP: Port 143 I can only type IMAP:Port143 which is the wrong spacing

Where has the 'custom export' options gone when exporting slideshow iPhoto 9.5.1

I can't remember if my iPhoto has updated recently but all of a sudden i can no longer do a custom export and the only window that pops up is this one
when i used to get this one before
am I going mad, or has this just disappeared.

These options were removed by Apple. No one outside of Apple knows why.
iPhoto Menu -> Provide iPhoto Feedback

How to clear memory in MVC when exiting from application using BACK ?

Hi Friends ,
I am using the JavaScript back function to exit from my application to the calling page . My BSP application is stateful and MVC based . I am calling my application using the SYSTEM application sample pages for session management - session_single_frame.htm & session_default_frame.htm .
I am observing that if i run my application in Portal whenever i hit back ..i do return to the calling page but again if i come to my BSP application the old data is seen . If i do the testing outside portal environs it is cleared ..i believe as the session close popup is seen and executes completely .But within portal as the popups are not enabled may be the session clean up is not happening .
How can I overcome the situation . i dont want to exit as i want the user a way to go back to the calling page directly .
Appreciate your help in advance.

it could be because of the caching property of the BSP iview.
set "Allow Client-Side Caching" of BSP iview to "NO" and try.
Regards
Raja

I have 2012 Toyota Prius and I can't remove the playlist in the car memory. Even when I reset and delete my iphone it shows up again. Pleas help I tried resetting the Bluetooth setting as we'll bit the playlist still shows up.

Please help me remove this playlist in my prius it's so annoying. The music isn't even on the phone anymore. Thank you

You've provided information stating that you attempted to delete the iphone from the bluitooth settings of your vehicle. I'm wondering if you as well as asking the blutooth to delete the iphone have you instructed the blutooth settins in your device to 'forget' this blutooth?
Once this blutooth is forgotten by the vehicle that should remove all settings that are memorized by the device.

I have just purchased an ipad 2 (already have an inpad1) and after syncing through itunes it will not conncect to my home wifi connection. The first ipad connected immediately when bought. this one indicates my wifi address but states not connected.

I have just purchased an ipad 2 (already have an ipad1) and after syncing through itunes it will not connect to my home wifi. The first one connected immediately after setup. This one indicates my wifi accpimt bit states not connected. Help!

What make, model and version router do you have?
Is MAC address filtering turned ON in your router?
Do you have a limit on the number of connections set in your router?
What type of security are you using, i,e, WEP, WPA, WPA2?
Have you tried restarting your router? (remove power for 30 seconds and restart)
Does your iPad 2 work on any other networks? Starbucks, Borders, etc

How we can see the abap memory data

How we can see the abap-memory data
fine the code below
import lsind
         report_title
         table_name
         report_field
         change_display
         show_hide
         conversion_exits
         table_description
         form_program
         select_form
         update_form
         line_size
         line_count
         records[]
         fields[]
         header_fields[]
         select_fields[]
         xrep[]
         from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]

Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful.

How do I delete photos from iPod Touch? Some photos do not have the trash basket option!

How do I delete photos from iPod Touch? Some photos do not have the trash basket option!
When I first synced my iPod Touch with my laptop, it uploaded a lot of photos onto the iPod. I now wish to delete those but it does not seem as a straight forward option!

For photos synced to the iPod you have to unsync them:
To delete photos from your device
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply.
http://support.apple.com/kb/HT4236

How disable the full screen option in the standard or wireframe video player ?

I was wondering if (and how) it's possible to just disable the full screen option in the controls that appear below the video player (standard or wireframe).
I want to have a video player with the progression bar, play / pause options, the counter without the full screen option because: "When someone clicks the Full Screen button during playback, the video opens in a pop-up window. Any interaction used to transition to a new state in the application does not work."
http://help.adobe.com/en_US/flashcatalyst/cs/using/WS4bebcd66a74275c3-326fcb52123816c0204- 7fed.html
Thanks for your help.
//Catalyster33//

I don't think so from within Flash Catalyst. That is all part of the component. I took a quick look at the docs, and did not see that element at as a parameter. There are only two options I can think of: either build a custom controller in Flash Catalyst (which may not have all the same functionality as the stock controller) or take your project into Flash Builder and modify the controller skin there.
Chris

Is Japanese language option available when I subscribed to Creative Cloud in abroad?

Recently I renewed my Creative Cloud membership with full-paid one year subscription. When I bought the subscription last year, I bought it by upgrading from CS3 through discount campaign. I could use Japanese language option since my CS3 was a Japanese version. However, when I updated to CC from CS6 yesterday, all the sudden I could no longer use any applications in Japanese. Because I'm using Mac OSX 10.8 with a Japanese operating system, I need the Japanese language option particularly when editing Japanese text.
If anyone living in the abroad as a foreigner plans to purchase Creative Cloud membership, they should be able to use any applications in their own native language, shouldn't they? I'm really disappointed this major upgrade if this couldn't provide a multi-linguistic platform.

Hide-sobue which country/region did you purchase your subscription? You can find information on the type of subscription you have under your account at http://www.adobe.com/. For information on how to manage your subscription please see http://forums.adobe.com/thread/1146459.
Have you subscribe to a multi-language subscription or English only?

How the ASR memory options shipped when bought as spares?

Similar Messages

Maybe you are looking for