How the campaign with communication channel telephone picks the mobile No.?

Hello All
I created a marketing campaign with communication channel telephone the cal l list is only generated for the telephone number but I want it to pick the mobile phone number and use it. If I put the mobile number only it gives me error that the communication is missing
Regards
Jacopo Fransoice

Please try this:
Assign the target group again. Assign the already prepared target group to your campaign. Assign the Channel: Telephone (with activity creation). Release and Execute the campaign on the Assignment Block Campaign Details. Execute the campaign for the target group. Schedule the batch job to be executed immediately.
Please tell me if it doesn´t work.
Thanks,
Marcus

Similar Messages

  • How to find which communication channel is picking the file

    Hi
    Can any one tell me, how can i  find which communication channel is picking the file from the source directory?
    I have a file scenario. File is coming to directory but it disappears even after I STOP the communication channel, I am using for this scenario
    I want to find out which communication channel is picking the file.
    How can i do it?

    Hi,
    you can try this:
    Go to Communication Channel monitoring in Runtime Workbench.
    Select all file adapters and check cluster node for each Channel. If the file is picked by the channel you will see processing details or errors related to channel here.
      Since as you say the message is not seen in sxmb_moni then the communicaition channel would be red. Files that are picked from directories but not visible in sxmb_moni are usually in error at channel level.
    Hope this helps.
    Regards,

  • How can One sender communication channel pick two file from two location

    Hello
    I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

    >
    Soumitra Sinha wrote:
    > Hello Vijay
    > I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
    > i have two folder   folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can  pick file from two location and how one receiver channel can put in two location.please help me..
    Ok now I get your requirement.
    you cant achieve this -  how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
    easy way - involve IR mapping
    else
    have a adapter module to define your dynamic configuration.
    Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Set the dynamic directory/file name etc for your receiver adapter.

  • How to select a communication channel based on a field in the message?

    Hi All,
    In my scenario - Sending system will send one country field in the message ,I have one receiver system which has different folders for different countries.
    I have created separate communication channels for separate countries.
    Now at runtime based on the country field in sender message I need use the channel respective to that country.
    How should i achieve this?
    Please help.

    Hi,
    Say you have 3 countries - I would suggest:
    1) Create 3 services - each for one country
    2) Create 1 CC's under each of these services
    3) In your Receiver Determination ->Configured Receivers -> Condition field --- put in the condition (by choosing the field from the input that has the country code)
    4) Against each condition, choose the respective service for that country
    5) Complete the Interface Determination - (by calling the same mapping in all three Interface Determination)
    6) Complete the Receiver Agreement by choosing the appropriate CC created as in Step 2)
    1) and 2) are basically for ease of use. If you need to identify the Service or CC - this would be user-friendly.
    If you dont want to create 3 different services - you can still not do Step 1 and continue from Step 2.
    Regards,
    Balaji.M

  • How to configure receiver communication channel in File to mail scenario?

    Hi all,
            I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is  a mail server. should i create any third party business system for this one?
    can anyone suggest me to define a receiver comm channel in a right manner?
    helpful answers will be rewarded.

    Hi,
    Check these
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
    Regards
    Seshagiri

  • Sender JMS Synchronous communication channel not picking up files from JMS

    Hello,
    One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
    When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
    if anyone is haivng any solution for this, please reply back.
    Thanks in advance.

    Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
    simple solution create new communication channel with same details and try to use the same.

  • MQ 2 FILE scenrio - can not communicate with communication channel

    hello
    trying to run MQ 2 file and the file is in the MQ and the communication channel of the sender write me in the RWB this message
    XI inbound processing failed for message at 2008-04-15. JMS and XI identfers for message are ID:.......
    JMS adapter will rollback database and JMS session tranactions.
    does any one know what is the problem with the Queue? why does the sender does not recieve the message and I dont see it in SXMB moni?

    Seube wrote:
    mmm it seems I spoke too quickly, things seems to work as expected now. I don't know what I did change since.
    I've retested between two cards: it seems also ok except 2 strange things:
    - when CAN2 is physically connected on PC2, it seems CAN1 that listens instead (as if CAN1 was connected)
    - trames sent from CAN0 and CAN1 on PC1 seems to be repeated from IXXAT card: they are returning respectively on CAN1 and CAN0.
    Sorry, no idea on these two.  As for the first one, what happens if you connect CAN1 to CAN2 on PC2 (no connetion to PC1)?  I don't know anything about the IXXAT card.  Is there some switch that internally bridges the two ports?

  • How to render with alpha channel?

    Hello,
    I am trying to render a comp with alpha  channel QT PNG. When i play the clip it's with black BG but if i  imported in AE is with alpha channel. How to render in such way that i  can play in Quicktime without the black BG? Am i missing something?
     Thanks!

    robert_ro wrote:
    Hello,
    I am trying to render a comp with alpha  channel QT PNG. When i play the clip it's with black BG but if i  imported in AE is with alpha channel. How to render in such way that i  can play in Quicktime without the black BG? Am i missing something?
     Thanks!
    You've successfully rendered the alpha channel. Alpha information is not displayed as expected in some players. IN QT Player, your alpha is transparent but the player has no background so it defaults to black. Check the playback operations and settings/prefs for QT Player, there may be a way to tell it to show alpha information.
    bogiesan

  • How can we stop communication channel at run time?

    Hi,
      I have a requirement where in we have to stop the JMS Sender communication channel in case the Receiver System is down. Could you please let me know how to stop the sender communication channel at run time.
    Thanks
    Rajeev Gupta

    Rajeev,
    Like Praveen Kumar said, I dont think there is an out of the box solution for this. But if you want to stop the communication channel, you could do it using a BPM.This solution is just something that came to my mind. It would be resource intensive to implement this. But here goes...
    Try to make the call to the Receiver System a synchronous call and have an exception branch in the block which has the synchronous step type. So if the Receiver System is down you would get an error in the Sync Step Type and it would go to the exception branch.Try to make a HTTP call from BPM to stop the communication channel. The URL for the HTTP call could be what Matias Denker suggested. This would stop the communication channel. This solution might however have two disadvantage that i foresee.
    1) It might stop the communication channel not only for system down but for any kind of synchronous error.
    2) Starting the communication channel has to again be a whole different process.
    Thanks
    Praveen M

  • Problem with  communication channel on receiver side with file adapter

    Hi all,
    I m doing a scenario of collection of multiple idocs into a file.When i m testing this scenario,i m getting a flag successfully executed in SXMB_MONI.But,my file isn't created in my directory.When i monitor the communication channel in Runtime workbench,it's showing error :<b>Channel has not been correctly initialized and cannot process messages</b> for my receiver file adapter?I am not able to figure out the error.Anybody having idea about this problem.
    Regards,
    Anoop

    Hi Anoop
    Check it - File adapter is active ? try to Re-activate the same.
    Also do CPACache Refresh.
    Still problem, tyr out by restarting the Adapter Engine
    Cheers..
    Vasu
    <i>
    Reward Points if found useful **</i>

  • How to test Particulare Communication Channel is active or not in UDF?

    Hi,
      Can any body suggest me how to code in UDF particulare Communication Channel is active or not. If it is inactive then I have to thow exception else ok.
    Appreciate for your response.
    Regards,
    Daniel.LA

    Daniel,
    Check this..
    String BSys = "BS_FSCM_AR_CLNT100";
    /1. Determine a channel (Business system, Communication channel).
    Channel channel = LookupService.getChannel (BSys,"CC_RFC_TEST");
    Then you do a
    //2. Get a RFC accessor for a channel.
    accessor = LookupService.getRfcAccessor(channel);
    add this code
    try{
    if(accessor == null;
    }catch(Exception e){
    throw new Exception("Communication channel for System " + BSys + "Inactive ");
    That should fix it....:-)
    Hope that helps
    Regards
    Ravi Raman
    Channel.

  • How replace Apostrophe(') in communication channel?

    Hi All,
    I am working on file to jdbc scenario. The DB is AS400 system.
    I am passing this as my source data:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_DeptSender xmlns:ns0="http://mindtree.com/xi/m1004968">
      <IPROD>005</IPROD>
      <IDESC>P/B/PEPPERONIPI</IDESC>
      <ICLAS>24</ICLAS>
    </ns0:MT_DeptSender>
    I tried passing the data directly without any quotes first because of which I got this error in receiver CC:
    Error 'java.sql.SQLException: The number of parameter values set or registered does not match the number
    of parameters.' executing service raw2sql with SQL statement '<?xml version="1.0" encoding=
    "UTF-8"?> <ns0:MT_DeptReceiver xmlns:ns0="http://mindtree.com/xi/m1004968"><STATEMENTNAME><TEST action="INSERT"><TABLE>datalib.iim</TABLE><access><IPROD>005</IPROD><IDESC>P/B/PEPPERONIPI</IDESC><ICLAS>24</ICLAS></access></TEST></STATEMENTNAME></ns0:MT_DeptReceiver>'
    After this I tried inserting the data in target DB ie in AS400 using insert query. The INSERT query which works there in that system is:
    INSERT INTO DATALIB/IIM (IPROD, IDESC, ICLAS) vALUES(005, 'P/B/PEPPERONIPI', '24')
    Two character fields here are bounded by quote('). So i changed my source file to this:
    <ns0:MT_DeptSender xmlns:ns0="http://mindtree.com/xi/m1004968">
      <IPROD>005</IPROD>
      <IDESC>'P/B/PEPPERONIPI'</IDESC>
      <ICLAS>'24'</ICLAS>
    </ns0:MT_DeptSender>
    ie., am passing the character fields along with single quote(') for those 2 fileds.
    This time I am getting this error in CC:
    Error 'java.sql.SQLException: The number of parameter values set or registered does not match the number of parameters.' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:MT_DeptReceiver xmlns:ns0="http://mindtree.com/xi/m1004968"><STATEMENTNAME><TEST action="INSERT"><TABLE>datalib.iim</TABLE><access><IPROD>& apos ;005& apos ;</IPROD><IDESC>& apos ;P/B/PEPPERONIPI& apos ;</IDESC><ICLAS>& apos ;24& apos ;</ICLAS></access></TEST></STATEMENTNAME></ns0:MT_DeptReceiver>'
    CC here is taking " ' " as " & apos ; " and passing it to the target DB. How can I repalce this "& apos ;" with quote "  '  " ?
    Thank you,
    Warm regards,
    Deepak

    HI,
    In Receiver adapter under Processing tab, check the SQL Syntax Parameters.
    Also go through this document and look into "SQL Syntax Parameters"
    http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    Regards,
    Sarvesh

  • How to find communication channels in the database

    Hello,
    how can I find communication channels in the database? Exists here a webservice or a template to read them out automatically? Has anyone here an idea or experience with it?
    Thanks in advance,
    kind regards,
    Peter Mueller

    Hi stephan,
       In XI all the intrgration logic will be stored as Design time objects(Integration Objects) and Runtime objects (Integratin Directory).So there wont be any specific tables that store all of them .But XI holds them in CACHEs called CPA caches and there are different caches too.
    Tables in XI
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables
    For caches:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
    Important Tcodes
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xiTransactionCodes
    Thanks,
    Ram.

  • How to resolve conflict in ID  Communication channel

    Hi  Experts ,
    I am getting conflict while importing a communication channel in QA . Basically we have done a change in Interface determiantion in dev system to get this change refelcted iin QA instead of transporting only interface determination whole config scenario has been transported . Transport got imported succesfully but while activating the change list it failed and shown conflict in Communication channel . Now If in Object tab I select SELECTDSPLAYED VERSION  then geeting error merge relation is null if selecting the displayed version then changelist get rejected .in that case it works now but in future also I will not able to make any change in the communication channel and whenever I make change and try to activate it it shows the same version conflict issue .
    KIndly help me with your inputs in this regard as sooner or later these transport will be moved to production and I want to keep myself prepared before it goes to production.
    Regards,
    Saurabh

    Hi Saurabh Sharma,
    Sorry for missing out that, this issue is with ID (Integration Directory)
    I think this has gone wrong in your case. Only interface determination has been changed, but, you have imported whole configuration scenario (along with communication channels).
    SAP help [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/39/f3103e02db137de10000000a114084/frameset.htm ] . Note the following for communication channels: To avoid messages being sent from a productive system to systems in the test landscape, the Integration Builder only exports a selection of attributes. Therefore, address data (host, port) and access data (user, password) are not contained in the export. In the adapter metadata in the ES Repository, such attributes are flagged as not transportable (they depend on the adapter type and are fixed). Once new objects have been imported, you must add the non-transportable attributes in the target system. These additions are retained in any further import of the object.
    FYI. Unlike when importing in the ES Repository, when importing objects to a directory, version management always creates a new version for the objects.
    Solution, as you are not able to activate objects in ID (Integration Directory) due to error message, reject them. Export only Interface determination and import it in QA system.
    Regards,
    Raghu_Vamsee

  • Scheduling Communication Channel

    Hi all,
    Please can you help me in two issues:
    1. How do I Schedule the Communication channel to pick a file at a particular time, say only at 10.30 pm daily for 30 minutes?
    2. In my scenario many files are placed in the same FTP location based on slight changes in the name of files based on the system from where they are placed, like 2000 for IB, 3000 for IF, etc. So i need to poll both files with file name starting with 2000 and 3000. Can it be done using a single Communication Channel?
    Expecting your replies soon,
    Thanking you,
    Harikumar. S

    Hi Hari,
    You can give the time schedule in Processing Parameters of Sender communication channel or unix administrator also can schedule the time for interfaces with all (r/w/ex) permeations.
    Your query like 2000 for IB, 3000 for IF, etc. So i need to poll both files with file name starting with 2000 and 3000. Can it be done using a single Communication Channel?
    As per knowledge you have 2 receivers one for 2000 , other for 3000 , this scenario possible to send the data using single communication channel.
    In message mapping using java function get the source file and in Interface Determination using X-path can differentiates and sends to target systems.
    Best Regards,
    Rajkumar

Maybe you are looking for

  • Need fix for microsoft visual C++ runtime library error

    everytime i want to open windows explorer, there will be a pop up saying"this application has requested runtime to terminate it in an unusual way. please contact the application's support team for more information." then when i press OK, it will have

  • WRT54GS Router-trouble connecting to vista computer

    I have 2 laptops. One is xp and one is vista. I used the setup cd to install my new router on both of them. the first thing i noticed was that there were 2 very different setups for the vista and the xp computers. when i loaded it into the xp compute

  • Matrix based game: path finding

    Hi, I'm writing a simple PacMan clone, in which the monsters form some kind of neural network. When a monster spots PacMan, it sends PacMan's coordinates to the other monsters, which then move to that location. When there is no target set, the monste

  • Firefox will NOT goto URL when typed in. How to fix?

    When I type a URL address in the address bar and then hit enter or the arrow on the right side of the bar Firefox will not go to the URL. It acts as though nothing has been entered.

  • App Store will not run.

    When I try to launch the App Store, a dialog box says it "damaged or incomplete".  How does one re-install it?