How the data transfer from r/3 to bw

Hi gurus,
for example iam extracting the data from sd module.
r/3 side some postings are done.that postings are comes exactly which place in r/3 side.
Then how we have taken that postings of data from r/3 to bw side.
Can u any one tell me the brief flow.No links please.
i will appreciate ur help and assign points
Thanku

Hi,
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
FI-CO 'Data Extraction -Line Item Level-FI-CO'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Please reward points.

Similar Messages

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Understanding the data transfer from source system to PSA

hi experts,
i an new to BI. i have created a transactional data source for VBAK table and replicated that to BI. Created transformations and info package for uploading the data into PSA. i just want to know the sequence of steps that the system executes when we run the infopackage. i know that it makes a rfc call to source and brings the data back to BI. i want to where that RFC call happens and what is the RFC FM name etc.,. I tried to debug the process using /h, but as you know, it is very difficult to debug the whole standard code. it is very complex. i got lost some where in the middle. if anybody has any idea / or done any research on this ,please share your findings.
thanks

Hi,
Once you click on Start buton in Infopackage,
1. BW system wil send on erequest to ECC along with DataSource details.
2. Based on BW request ECC will respond and it will send message OK and starts extraction.
3. Based on InfoPackage selection the Data will executes in ECC and picks the data in Packets.
4. And ECC will send the data in teh form of Datapackets to BW (Idocs)
5. Once the selection creatiro is over the Job will finish.
6. You can see the data in BW
Thanks
Reddy

ERec - Data Transfer from eRec system to HCM System

Hello All,
Currently am able to do the data transfer from eRec system to HCM system but am finding some inconsistencies here.
In our scenario we are on ehp4 and no XI in place, We are doing via RFC only. Stanalone eRec system
So here are few queries and if someone can address these would be really great and appreciate the help
1) While i do the data transfer activity, when i select activity and don not give the Hiring Date in the Org Assignment Column it throws an error "When transferring data using XI, the hiring date must be specified". But am not using XI, then why should it give this error?
Also is it not possible that i do the data transfer without any hiring date?
Also there are two options Planned and Completed. When i do the data transfer i keep it in planned status and do it it automatically saying that Complete
Is this correct
2)Now when i do the data transfer it is getting appeared in HR system when i execute the PA48 tcode.
Here my queries are
a) Suppose i do a data transfer for a candidate Abc on 10.10.2010 and run the PA48 tcode it appears in the list as hire date 10.10.2010
Now as a recruiter am again doing the data transfer for the same candidate Abc for 11.10.2010 and againg when i see PA48 there is again another entry for the Abc candidate for hiring
Is this correct process. How should these duplicate entries to be avoided. Pls help me
3) Also i case if I want additions infotypes to be transferred in PA48 how should we go for this development
Pls help me in these queries

Hi ,
Check the following OSS notes.
1. 1006679
2. 997181 ( Read the attachment in the OSS note ) gives the detailed information regarding EREC and HR)
Let me know if you need more info.
Regards,
Ram

Employee Data Transfer From Recruitment to PA

Hi All,
I have a query pertaining to employee data transfer from recruitment (PBA7) to PA.
Here the client uses recruitment module only for data maintenance and then transfer the data to PA module. Is it possible if we skip the data transfer from Rec. module to PA module.
Please advise URGENTLY.
Regards,
Garima

Garima,
If your query is resolved, request to close the thread or else feel free to touch base
Thanks and Regards
Anil

Data transfer from External Bluetooth device to iPhone

Dear Team,
We have a requirement, Data Transfer from a SIB (CAN to Bluetooth) to iPhone.
As we know in iPhone Bluetooth is support for Audio devices.
Is there any way to achieve the data transfer from an external Bluetooth device to iPhone/iPad?
With Thanks and Regards
Chandan Prakash
Renault Nissan
Chennai, India

Ok. There are some apps where we can send and receive data like photos, contacts, etc. We can chat also. So is there any way to receive data?

OM and PA data transfer from SAP 4.7 to ECC 6.0

Dear Experts,
hi
i am working on one project where i will need to design the data transfer from SAP 4.7 to ECC 6.0. this is not a upgrade project.
the data of PA and OM are in 4.7 which is existing system. i need to transfer entire data into ECC 6.0 so i can use that data for my E-Recruitment module ( we are doing E-rec fresh implementation.)
we will keep both the systems (4.7 and ECC 6.0). ECC 6.0 will be used for E-Rec and OM only. for PA and Payroll we will use 4.7.
can some one tell me,
1. what are the key points to keep in consideration from OM point of view ?
2. which is the best method to transfer the OM structure and data from 4.7 to ECC?
3. what are the risks?
4. which system we should make master system and which will be the slave system? why ?
your input will be much appreciated.
thanks and regards
chandra

Hi Chandra,
I was under the impression that you are planning to use PA & OM from 4.7, now I read it again.
Now its advisable to keep ECC 6 as a master system, becoz OM is the stating point of the HR processes where all Orgnization unit, job, position exists. Later the same data can flow to the slave system for PA use. As OM is the starting point, this system should be the master system.
Abou the IDoc interface.
Check the basic type HRMS_A05, whether it has all the data you need to transmit. T-Code WE30
If you need to add something you can create a Z version in WE31. I selected HRMS_A05 as it is present in both the SAP version.
Next there are series of transaction you need to process. Check with technical person who hands IDoc interafcing.
Steps are:
Assigning Message type to IDOC Type with extension. T-Code WE82
Create Logical System:
T-Code SALE-> Basic Settings-> Logical Systems-> Define Logical System
It is required to configure in the sending system as well as in the receiving system
Assign Logical System to Client:
T-Code SALE-> Basic Settings-> Logical Systems-> Assign Logical System to Client
Create RFC Destinations:
T-Code SM59, select ABAP connection of type 3.
Create Distribution Model: T-Code BD64
Generate Partner Profile: T-Code BD82
Maintain sending system partner profile: T-Code WE20
Link Message Type to Function Module T-Code WE57 in receiving system only
Hope this will help.
Let me know if you need anything else.
BR/Manas

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

Whats the maximum achievable speed of data transfer from RT to host PC

Hi
Anybody can tell me whats the maximum achievable speed of data transfer from RT to host PC, in case of both PXI and CompacRIO.
Regards
Visuman

Hi visuman,
To be honest, the dataspeed is dependent on how you architect the code, and the data communication channels that you use.
There are many factors that influence the maximum transfer rate, including network topology, types of interface used, OS, ambient network traffic etc.
You can control two things, packet size, and amount of sleep time between transmissions.
By altering the delay between consecutive TCP/IP transmissions and by varying the packet sizes sent from the embedded side to the host side, you can obtain a clear picture of network characteristics between the two devices. The end result is a report of the optimal TCP/IP configuration, that is packet size and sleep time.
Check out : Developer Zone : Measuring the Maximum Amount of Data Sent Out of a Real-Time Target Device
Here are some other links that maybe useful for you.
KB 2M9ARPEW : Real-Time VI to Host VI Communication Methods
Developer Zone : Real-Time FIFO for Deterministic Data Transfer Between VIs
Hope this helps!
Ashish Naik
Field Sales Engineer
National Instruments UK

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Does the data transfer used in the back up in time capsule included in the data allowance from my service provider?

Is the data transfer used in the backup with airport time capsule included in the data allowance with my service provider?

gheefromsa wrote:
I am using Ethernet cable to connect TC to the modem. I am only backing up my mac book air within range of the TC. So I guess it will be OK from your reply. As a trial I did interrupt the back up by turning off the TC, disconnecting the Ethernet cable, turning TC back on. The mac would not connect wirelessly with the TC without the Ethernet connection.
It is not using ISP .. absolutely for sure. Well 99.999%.. absolute tends to be only in maths.
But you did the test wrongly.. I said to disconnect the modem.. during the backup.. not turn off the TC.. obviously once interrupted the TC will not work again until everything is plugged in.. but it will work even bridged for a short time.. just unplug the WAN port from the modem.
The test is moot now.. as I can give you a 99.999% promise it is not using ISP.

How can I get the data back from my game

How can I get the data back from minecraft if I deleted the app and bought with a different Apple ID

No, they are tied to the ID that purchased them, and cannot be transferred to anyone else.

How to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format

Hi All,
I have a requirement in my project like to convert the date time from one format to another.my situation is like to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format. I am using the soa suite 11.1.1.6.
Can any one suggest me how to convert in the BPEL transformation.
Thanks,
Sanju.

Hi Sanju,
Store the date to be converted into a variable viz. dateVar. Now, process an expression in assign as: xp20:format-dateTime($dateVar,'[Y0001]-[M01]-[D01] [h]:[m01]:[s01]').
Regards

Can anyone explain the mechanism of data transfer from r3 to bw?

Hi all the bw expert,
i have one question on the mechanism of data transfer from r3 to bi 7.0. the followings is my concerns:
scenario:
The total numer of data is 1000 rows and these rows are seperated into 10 data package , each package contains 100 rows.
Now bw is trying to recieve these 10 packages from r3 in sequence.
When 5 data packages have been transfer to bi psa. the network is broken and the tranfer is canceled at the 6th data package.
What i want to konw is when the network is reconnected ,Does the transfer start from the 6th data package?
Please help me to explain all these. Is there any material or links can be used to understand this feature?
Thanks ahead.
Jinwei Zhang
From Beijing China

Hi......
Connection broken means load failed.......extraction is cancelled.......
If your load is delta........then make the QM status red in the Infopackage........and repeat the load........
If your load is full........(in case of full upload it is not mandatory to make the QM status red..........but ii is a good practice to make the qm status red)
then repeat the load........
But before repeating the load plz check the connection in SM59............if it is ok then repeat..........otherwise wait for som time.......If still in connection is not ok then contact basis people.....
Regards,
Debjani.......
Edited by: Debjani Mukherjee on Oct 6, 2008 7:02 AM
Edited by: Debjani Mukherjee on Oct 6, 2008 7:04 AM
Edited by: Debjani Mukherjee on Oct 6, 2008 7:09 AM

How the data transfer from r/3 to bw

Similar Messages

Maybe you are looking for