How the destroy xlet process everyWhere you want?

According to the Xlet state Diagram, the Xlet only canbe destoryed when the Xlet enters the "paused" and "active" state. But if "initXlet" and "startXlet" process take too much time, the Xlet will be out of control. (you cannot stop, destory Xlet. when Xlet is doing "initXlet" and "startXlet" process.). The only thing is waiting.
Anyone can tell me how to stop or destory Xlet that is in "initXlet" or "startXlet" process.

Is this introductory Java? There must be a better suited forum for this question... However, as most people in here are kind, I'm sure you will get an answer!
Good luck

Similar Messages

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong and the password is also wrong. HELP

Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

HT4859 i have reset my password and i dont have wifi to connect to my ipod and activate the steps in the i cloud process, now i want to know that will all my videos , photos and music will lost if i connect to my computer if storage and backup is in off m

i have reset my password and i dont have wifi to connect to my ipod and activate the steps in the i cloud process, now i want to know that will all my videos , photos and music will lost if i connect to my computer if storage and backup is in off mode

If iCloud Backup is set to Off in Settings>iCloud>Storage & Backup, it means that your iPod will not automatically back up to iCloud, but will automatically back up to your computer when you sync. The only way you would risk losing data is if you have never synced with iTunes before. If that's the case, you have to take special precautions to avoid losing data, as outlined in this user tip: https://discussions.apple.com/docs/DOC-3141.

Without touching the screen, only 2 of my apps started shaking randomly. Not the kind of shaking when you want to delete/move. It was odd. Any idea as to what that could be?

Without touching the screen, 2 of my apps started shaking randomly. Not the kind of shaking when you want to delete/move the apps. It was odd. Any idea as to what that could be?

An "other" that large usually indicates that the "other" includes corrupted files. Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Backing up, updating, and restoring iOS software

You must specify the a of filter if you want to save you filter- dependent

I get this message when I try to save an implementation for BADI : NOTIF_EVENT_SAVE
Specify filter types
Message no. ENHANCEMENT213
Diagnosis
You must specify the a of filter if you want to save you filter- dependent BAdI implementation.
System Response
Without a filter type, the implementation cannot be saved.
Procedure
Enter a filter type.
The filter type already exists. This is a standard SAP BADI.
There are related notes but not for my ECC 6.0 release.
I am using: SAP_BASIS 700 SAPKB70013
Has anyone had this problem?

I think u have already had ur Document Types.
Now using Tcode Se18 u will goto BADI. There U will Select Implementation --> Change / Display.
Now at below u will see Filter Dependent Check Box Checked which means that the BADI requires a filter.
Below that u can enter Ur document Types as filters for which types only u want the BADI to be processed. If u want all the Types to be entered and as the BADI is Filter Dependent , u have to enter all the Document types. Now the BADI is triggered only for the Documents containgin that Document type u entered in the filter only.
awrd points if useful
Bhupal

How the stock determination process works

Hi All
Can any one tell me how the stock determination process works in inventory management?
if possible give me the steps involved in stock determination process .
Regards
M S K

Hi
i hope this helps
http://help.sap.com/saphelp_47x200/helpdata/en/d8/2f3746996611d1b5480000e82de955/frameset.htm
regards
maniraj

When i close the browser it ask whether you want quit or save and quit , when i selet save and quit none of te pages are saved, or if saved where can i find them?

when i close the browser it ask whether you want quit or save and quit , when i selet save and quit none of te pages are saved, or if saved where can i find them?

Make sure that you do not use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox.
* [[Firefox does not ask to save tabs and windows on exit]]

HT204053 What is the best Appleid configuration when you want to share content with your children o n their ipad?

What is the best AppleId cinfiguration when you want share content with other iPads owned in family?

To share content you need to share an ID for the iTunes and App stores, however, I'd suggest seperate ID's for everything else.

How do I rid the User Account Control - "Do you want the following program to make changes to this computer?" - FireFox Helper pop-up that shows after every log in?

The following pop-up is displayed after every log-in, even after it is clicked yes after previous log-ins. Several students log-in the computers daily. How do I rid THIS?:
User Account Control
"Do you want the following program to make changes to this computer?
Program Name: FireFox Helper
Verified Publisher: Mozilla Corporation
File Origin: Hard Drive on this Computer

In Windows 7, Microsoft updated UAC in several ways. By default, UAC does not prompt when certain programs included with Windows make changes requiring elevated permissions. Other programs still trigger a UAC prompt. The strictness of UAC can be changed to either always prompt, or to never do so.
[http://windows.microsoft.com/eN-US/windows-vista/What-is-User-Account-Control What is User Account Control?]
[http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off Turn User Account Control on or off]
It is the same on win7.
[http://en.wikipedia.org/wiki/User_Account_Control User Account Control]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How the invocation between process and sub-process work?

As I have read throught some posts here and know that the web service whicn is used to trigger the process is asynchronous.
so is the invocation between process and its sub-process asynchronous using web service?
supposed there is a process like below:
Start Event -
>Sub-Process ->Automated Task-->EndEvent
I have some confused questions:
1: is it asyn to invoke the subprocess?
2: if the invocation is asyn, is the next "Automated Task" triggerred before the completion of the nested subprocess? It seems to be, but it is not so reasonable.
3: if the invocation is asyn, how the process get the return value of the nested subprocess?

Hi John,
the invocation of sub-processes is done via an internal runtime mechanism and not via normal Web Service call.
The sub-process call is synchronous, so the calling process is waiting for the reply from the sub-process. There are a few things to keep in mind when using sub-processes:
If you are branching off parallel execution paths (via a split gateway) within the sub-process and are using a regular end event, only the first token arriving at the end event will return to the calling process. The sub-process will keep running until either the last of its tokens flows into the end event or until the calling process is being terminated. In any case, the calling process will not react to any more tokens arriving at the sub-processes end event.
If you are using parallelism within the sub-process, but want it to terminate once the first token arrives the end, use a terminating end event in the sub-process.
Don't use the correlation condition at the start event of a sub-process. If this condition evaluates to 'false', the sub-process will never be started, but the calling process will wait forever for a reply.
If you want the sub-process call to behave asynchronously, you can model the sub-process to split off a token to the execution path where it does the actual work and have another straight path directly from the split gateway to the (non-terminating) end event. That way the calling process will continue right away, but of course you cannot expect any response coming out of the sub-process.
Best regards,
Oliver

The frustrating 'bug' of the oracle java page if you want 64 bit support.

gosh, i wish there were a way to simply contact the oracle webmaster/webdev team. there isn't, as far as i can find. here's what i just emailed to [email protected] figured i'd share it here, on the outside chance someone at oracle might know how to escalate this:
hi, this has frustrated me a number of times in the last year or two.
go to the main java download page:
http://www.java.com/en/download/manual.jsp
i want the 64 bit java plugin. hey, there's a link "information about the 64-bit java plug-in", yay! click it, it goes to
http://www.java.com/en/download/faq/java_win64bit.xml
<read a bit through it> ah, there towards the bottom of the page, "java for 64-bit browsers, with the following text and link:
"for downloading 64-bit java click 64-bit manual download". cool! click the link -
http://www.java.com/en/download/manual.jsp
it takes me right back to the main download page! it's an infinite loop!
i eventually just google, and type in 'jre-7u5-win' and it autocompletes to 'jre-7u5-widows-x64.exe download, and the first result returned is to the actual page needed:
http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1637588.html
is there any chance y'all could fix this? i'm sure i'm not the only person frustrated by the circular results the main download page provides.
thanks,
paul

Interesting... I have now tested on various Windows versions with various browsers, including FF, IE, and Safari. I even tested on my iPhone. It appears that the page attempts to identify your platform and browser and displays differences in the page based on that result. So, for example, on my iPhone (in Safari) and Linux (with FF) where I know I can't use java or at least one for Windows, the page resembles what you described. However, on all my Windows machines (regardless of browser) the page displays properly.
So the questions to you is, are you doing this on a Windows machine or something else? If not Windows, this is why you are having the issue. If you want to download a Windows release while running a Linux, Mac, or other platform, you should use the method I described in my previous post of using java.sun.com then choosing Java SE under Top Downloads.
If you are on a Windows platform, but are seeing this issue, be sure your browser version is current and ensure that you do not have a security setting or security software which may be preventing this page from properly detecting your platforms.
Edited by: Michael Ferrante (Oracle) on Aug 1, 2012 9:58 AM

Is there a possibility to re-introduce the functionality which did exist in earlier versions of Firefox which made it possibble to click only once on 'history' in the Firefox browser toolbar when you wanted to see your session surfing history?

Does someone know if there does exist the functionality in Firefox of showing a longer list of the websites already visited (the history) without using CRTL-SHFT-H ?
I don't like to use CRTL-SHFT-H all the time!!

There's a "History" button ''(looks like a clock)'' in the Customize Palette, which opens the Sidebar view of History - you can move it to one of the Toolbars for one-click access.
https://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar

"The project has changed - do you want to save changes?"

This is more or less a meaningless warning in Adobe Captivate 5. if I OPEN a project and close it immediately I get this warning: the project has changed. But that is not correct, I didn't touch a single slide, I simply open the file and look at it, then click on the Close button.
If I save the project, then chose Export Captions, I get this warning as well. How can exporting captions count as a change to the project?

Hello,
It is just my intuition: thinking that the cache is updated whenever you open the project, so perhaps this is the reason?
Lilybiri

Keep getting the message "An error occurred with the publication of album - Do you want to remove the album from your library?" don't know why

I don't know why I keep getting the following messge for a recent album I created in iphoto:
"An error occurred with the publication of album (name of album). Do you want to remove the album from your library?" In smaller letters under that message, is "The feed could not be found or is invalid." There are 2 buttons to click - either "Remove Album" or "Keep Album". Never had this issue before, did not do anything different this time.
Mac OS X v. 10.6.8
iphoto 09 v. 8.1.2 (424)

Is this an album you're publishing as a MMe Gallery? If so delete the album and gallery, create a new album and gallery and try publishing again.
OT

HT204023 What do you do when the hotspot is on and you want it off

The phone cannot access Internet with the SIM card but I can access it through wi fi

Exactly what is it you want?
On the subject you state thet you want to turn off the phone's "personal hotspot" which is used for providing Internet connectivity for other devices by using the phone's connectivity thru the carrier's network. This is controlled thru Settings / Personal Hotspot (On/Off).
But in the body of your message you state you cannot connect thru your carrier (connecting after SIM card registration) and you connect thru Wi-Fi. Which in turn connects via Settings / Wi-Fi and you choose the access point, with possible authentication, on the following screen once the option is On.

How the destroy xlet process everyWhere you want?

Similar Messages

Maybe you are looking for