How the DVD image on screen varies in size .....

So I have my project on DVD and am pleased, in fact amazed at how good the quality is but there's one little frustrating niggle!
In order to keep text on some of my graphic images on screen, in the timeline I've had to reduce the size of the overall image. Once converted to DVD, there will be a black border around the image on a Sony TV. Play it on a different TV (LG perhaps) and that gap is filled so it fits very smartly on the 16:9 screen. In fact the text is very close to the edge. And if I stuck strictly to the title safe boundaries, on the Sony TV the black border would be even wider. Gosh I hope this is making sense!
Video footage is of course fine because no-one is gonna notice what's missing around the perimeters, unless of course some text appears there too but it would never go all the way to the edge.
Ideally it would be perfect if the graphic designers designed the image so the text wasn't so close to the edge of the graphic but there's nothing I can do about that now.
So a whole lot of these DVDs are going out to various places here and there and on various screens and in many cases the screen will be filled but in some cases it won't and will look a bit average.
By the way the screens are on the same settings, 16:9, Full screen.
Is there a simple solution to this? Thanks for stayin' with me.
Peter

Ideally it would be perfect if the graphic designers designed the image so the text wasn't so close to the edge of the graphic but there's nothing I can do about that now.
Inform your designers that Photoshop includes templates that conform to TV & Video specifications.
They even have the Action and Title Safe guides switched on by default.
Look in the File > New menu bar item then click the Preset button to find the templates.
For stuff like titles and logos that need to be composited, they should deliver .TIFF files with a transparent background.

Similar Messages

What is the viewable image area/screen size (length x width) on the 2014 21.5" and 27" imacs?

what is the viewable image area/screen size (length x width) on the 2014 21.5" and 27" imacs? i have an older 24" and am trying to determine if i need to go up or if 21.5" will be adequate. Thanks!

21.5 -
Height: 17.7 inches (45.0 cm)
Width: 20.8 inches (52.8 cm)
27 -
Height: 20.3 inches (51.60 cm)
Width: 25.6 inches (65.0 cm)
Ttake about an inch off for the lack border from each side and youll have an approximate.
http://www.apple.com/imac/specs/

Why is there a scroll bar though I set the background image to "scale to page size"?"

Why is there a scroll bar though I set the background image to "scale to page size"?"

The current build of iTunes may occasionally draw the scroll bar off the edge of the screen. It should be possible to resize the window to reveal the scroll bar.
You can restore much of the look & feel of the previous version with these shortcuts:
Ctrl-B to turn on the menu bar.
Ctrl-S to turn on the sidebar.
Ctrl-/ to turn on the status bar.
Click the magnifying glass top right and untick Search Entire Library to restore the previous search behaviour.
You can also open the menu bar temporarily by pressing Alt.
tt2

How to insert Image on Screen

Hi Experts,
I have to insert a Image on Screen in Dialog Programmiong.
Can anybody tell me how to do this ?
Thanks,
SB.

Hi,
You can do that using function modules.
you can check the Include program : SAPTABLEPAINTER_DEMO_PBO.Which is used in Main prog : SAPTABLEPAINTER_DEMO.
With the help of Custom control you can achieve that.
CONSTANTS: CNTL_TRUE TYPE I VALUE 1,
      CNTL_FALSE type i value 0.
data:h_picture       type ref to cl_gui_picture,
     h_pic_container type ref to cl_gui_custom_container.
data: graphic_url(255),
      graphic_refresh(1),
      g_result like cntl_true.
data: begin of graphic_table occurs 0,
        line(255) type x,
      end of graphic_table.
data: graphic_size type i.
data: g_stxbmaps type STXBITMAPS,
      l_bytecnt type i,
      l_content   TYPE standard table of bapiconten initial size 0.
g_stxbmaps-tdobject = 'GRAPHICS'.
g_stxbmaps-tdname = 'ENJOY'.
g_stxbmaps-tdid = 'BMAP'.
g_stxbmaps-tdbtype = 'BMON'.
call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
     exporting
          i_object       = g_stxbmaps-tdobject
          i_name         = g_stxbmaps-tdname
          i_id           = g_stxbmaps-tdid
          i_btype        = g_stxbmaps-tdbtype
     importing
          e_bytecount    = l_bytecnt
     tables
          content        = l_content
     exceptions
          not_found      = 1
          bds_get_failed = 2
          bds_no_content = 3
          others         = 4.
call function 'SAPSCRIPT_CONVERT_BITMAP'
     exporting
          old_format               = 'BDS'
          new_format               = 'BMP'
          bitmap_file_bytecount_in = l_bytecnt
     importing
          bitmap_file_bytecount = graphic_size
     tables
          bds_bitmap_file        = l_content
          bitmap_file            = graphic_table
     exceptions
          others                 = 1.
call function 'DP_CREATE_URL'
     exporting
        type                 = 'image'
        subtype              = cndp_sap_tab_unknown
        size                 = graphic_size
        lifetime             = cndp_lifetime_transaction
     tables
        data                 = graphic_table
     changing
        url                  = graphic_url
     exceptions
        others               = 4 .
create object h_pic_container
       exporting container_name = 'CUSTOM_CONTROL'.
create object h_picture exporting parent = h_pic_container.
call method h_picture->set_display_mode
     exporting
          display_mode = cl_gui_picture=>display_mode_normal.
call method h_picture->load_picture_from_url
     exporting url    = graphic_url
     importing result = g_result.
For more information on this check stnd programs..
Thanks
Parvathi

Dual Screen / Render differ for the same image (same time!) - Full size

On my Mac Pro / lightroom 2.3, I have 2 screens connected (same brand: Dell, Same size 24'). One is in landscape position, the other is vertical.
I use the landscape one as Screen 1.
If I display an image (1:1 ratio) on the Screen 2, the rendering is not sharp (seem to not be finished / close to be!), the same image render on screen one is correct! The problem is easy to check: At the same time you have a sharp image (Screen 1) and a blurred one (screen2).
Images came from Canon EOS 50D raw file.
Does this problem know? Any idea to solve it?

I'm having a similar problem on my Mac Pro with an Apple 23" as Monitor 1 and a Samsung 21" in Portrait orientation as Monitor 2. Sometimes, even though full 1:1 previews have been rendered, when I zoom to the 1:1 view on Monitor 2 (usually with the Grid View on Monitor 1), it zooms in but never loads the 1:1 preview, so the image is blurry.
The only solution I've found is to restart Lightroom.

Dumb question...once I build the DVD IMAGE (ISO) and a DVD FOLDER

Can I burn the ISO file FROM ENCORE or the DVD FOLDER?
thx

>Beyond that there's a whole army of tools that can burn ISO images, including Nero, DVD Decrypter or whatever.
DVD De3crypter is now illegal in most countries. Sony's legal team stopped it's creator - Lightning UK - from developing it on pain of lawsuits as it is capable of defeating most Copy Protection on DVD..
It metamorphosed into IMGburn, which is the (massively) updated burn engine from the sadly defunct DVDDecrypter.

How the MENU EXITS and SCREEN EXITS are incorporated in FRAME WORK ?

Hi All ,
I read the sevaral docs that gives the basic understanding of the frame Work technology .But no where I could find the Concept Of Screen exits and menu exits in Frame work . Could you please give some idea on that ? Appreciate if you can give any documentation links .
Thanks in advance ,
Dharma .

Hi All ,
I read the sevaral docs that gives the basic understanding of the frame Work technology .But no where I could find the Concept Of Screen exits and menu exits in Frame work . Could you please give some idea on that ? Appreciate if you can give any documentation links .
Thanks in advance ,
Dharma .

IChat and how the camera image looks

the image is not very clear, and i also saw in the website that iChat should show a black table like surface where the images have the effect of being reflected on.
does anyone know what should i do for those 2 things.
my ilumination is good, so that shouldnt be a problem.
thanks

The deployement is to "All systems" collections.
If I deploy on a new computer : it's works.
If I redeploy on this same computer with another name: it's works.
If a try again on this computer : no task sequence available.
To resume:
Step 1: Use OSD on one computer
Step 2: Use OSD a second time on the same computer with another names (works)
Step 3: Use OSD again on the same computer (third time) and see no task sequence available.
Task sequence deploy to All system...
So to works, I need to delete computer in SCCM.
There must be something wrong then. The client should still be member of 'All Systems' after being reinstalled. Fix that and you're all set.
Torsten Meringer | http://www.mssccmfaq.de

Automatic transcode settings can't close DVD image in standard 4,7gb size

So I have this feature film of a marriage 1h30m long that Encore refuses to generate an ISO of standard DVD size. The point is, for some reason this project in particular is generating a 6gb image, in the settings that even 2h10m fits standard DVD size. What am I doing wrong? What to do now?
Encore 5.1

On an automatic transcode, Encore uses what you have already transcoded in the project plus menus, motion menus, etc, and uses settings to fit the rest on the disk. If you transcode some assets early, then others later, Encore will transcode the first ones at higher bitrates and not be able to go low enough to get the others to fit.
I have not tested whether this will actually result in too big for the disk, but I suspect it might.
You could look at the transcoded files in the Encore folders and check them with mediainfo or gspot for bitrate to see if they vary.

How to fit image file to exact table size on import?

I am inserting image files (gif and jpeg) into spots in a pre-existing table. When I do so the image file comes in way oversized and I have to resize the image to my original table block size. Is there a method of inserting an image and specifying that I want it to fit to the size of the table cell beforehand? Also, when I reduce the size of the image to the exact dimensions of an already existing table cell the size of the cell expands slightly and things are not lined up perfectly afterwards. Am I supposed to make the image slightly smaller than the table cell to compensate for this? Thanks for your time.

Here is the code for the site I am just starting out with:
Home
I Googled PHP resizing but don't quite know where to put the code they have
listed. Does it go just before the table code?

I resize my window image so everything is correct portion but as soon as I change window to next page the image goes back to small size. How can I stop this occuring. This happens when go on facebook or any other area. Help me please.

size of the general image that I see reduces toby about a third - I resize it by pressing Ctrl key and using my mouse scroll button to expand the whole image so that it fill the screen. As soon as I go to the next page the whole image reverts back to original size and I have to repeat the action again.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How the data is embedded in the image

please explain this code clearly !!! how the file is embedded inside the image and retrieved back !!!
Private Sub btn4(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles NLabel4.Click
Using O As New OpenFileDialog With {.Filter = "(Image Files)|*.jpg;*.png;*.bmp;*.gif;*.ico|Jpg, | *.jpg|Png, | *.png|Bmp, | *.bmp|Gif, | *.gif|Ico | *.ico", .Multiselect = False, .Title = "Select image"}
If O.ShowDialog = 1 Then
Try
Using FS As New IO.FileStream(O.FileName, IO.FileMode.Open)
FS.Seek(0, IO.SeekOrigin.End)
While Not FS.ReadByte = Asc("|")
FS.Position -= 2
End While
Dim s As String = Nothing
While Not FS.Position = FS.Length - 4
s &= Chr(FS.ReadByte.ToString)
End While
Dim Ext As String = Nothing
FS.Seek(0, IO.SeekOrigin.End)
While Not FS.ReadByte = Asc("*")
FS.Position -= 2
End While
While Not FS.Position = FS.Length
Ext &= Chr(FS.ReadByte.ToString)
End While
FS.Seek(FS.Length - ((s.Length + s) + 5), IO.SeekOrigin.Begin)
Using sfd As New SaveFileDialog With {.DefaultExt = Ext, .Filter = "*." & Ext & " | *." & Ext}
If sfd.ShowDialog = 1 Then
Using FSw As New IO.FileStream(sfd.FileName, IO.FileMode.Create)
While Not FS.Position = FS.Length - (s.Length + 5)
FSw.WriteByte(FS.ReadByte)
End While
End Using
End If
End Using
End Using
Catch ex As Exception
MessageBox.Show("There was an error!" & vbNewLine & vbNewLine & "The application will now close.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
Me.Close()
End Try
End If
End Using
End Sub
Private Sub btn3(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles NLabel3.Click
Dim ext As String = TextBox1.Text.Substring(TextBox1.Text.LastIndexOf(".") + 1)
Using SFD As New SaveFileDialog With {.DefaultExt = ext, .Filter = "*." & ext & " | *." & ext}
If SFD.ShowDialog = 1 Then
Try
Dim ImageBytes() As Byte = IO.File.ReadAllBytes(TextBox1.Text)
Dim FileBytes() As Byte = IO.File.ReadAllBytes(TextBox2.Text)
Dim FS As New IO.FileStream(SFD.FileName, IO.FileMode.CreateNew)
FS.Write(ImageBytes, 0, ImageBytes.Length)
FS.Write(FileBytes, 0, FileBytes.Length)
FS.WriteByte(Asc("|"))
Dim FileSize() As Byte = System.Text.ASCIIEncoding.ASCII.GetBytes(New IO.FileInfo(TextBox2.Text).Length)
FS.Write(FileSize, 0, FileSize.Length)
FS.WriteByte(Asc("*"))
Dim Extention() As Byte = System.Text.ASCIIEncoding.ASCII.GetBytes(TextBox2.Text.Substring(TextBox2.Text.LastIndexOf(".") + 1))
FS.Write(Extention, 0, Extention.Length)
FS.Close()
FS.Dispose()
MsgBox("Done")
Catch ex As Exception
MessageBox.Show("There was an error!" & vbNewLine & vbNewLine & "The application will now close.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
Me.Close()
End Try
End If
End Using
End Sub

1. the new file which we are creating will be in this order or not
file_extension * data_file_size | data_file image_file
No. The file will be in the order in which it is written in the writing routine:
1. Image File
2. Data File
3. "|"
4. Data File Size (ASCII)
5. "*"
6. File Extension (ASCII)
2. explain this snippet .. why we are changing position while we are extract file
While Not FS.ReadByte = Asc("|")
FS.Position -= 2
End While
Dim s As String = Nothing
While Not FS.Position = FS.Length - 4
s &= Chr(FS.ReadByte.ToString)
End While
Dim Ext As String = Nothing
FS.Seek(0, IO.SeekOrigin.End)
While Not FS.ReadByte = Asc("*")
FS.Position -= 2
End While
While Not FS.Position = FS.Length
Ext &= Chr(FS.ReadByte.ToString)
End While
FS.Seek(FS.Length - ((s.Length + s) + 5), IO.SeekOrigin.Begin)
The file read position is recalculated before each read, depending either on the position of the marker ("|" and "*") or on the length of the data. That's how each portion is extracted - the position is set to the start of the portion, and that
portion is read for the correct number of bytes. The portions are extracted from the end back towards the beginning because the markers can only be guaranteed as unique (they are illegal in a filename extension) when searching backwards.
3. after combining the files with the image .. how the created image is visible (even we are not using any algorithm)
That depends on the image file format, but most formats will use header information that describes the location within the file of the various bits of data that are needed to create the image. The side effect of this is that if there is information
in the file that is not referenced from this header data then it is simply ignored. That's what this procedure is relying on - because the new data is appended to the end of the file it will not be referenced from the header data and will be ignored.
For a complete description of what this code does and why it works you should refer to the original author.

How to find the dvd icon

professional DVDs always have the DVD video trademark on the disc - do you know where i can get hold of this to put on my dvds

http://www.dvdfllc.co.jp/logo/lg_who.html
Pretty clear on when logo can be used
Basically, Contents Owners/Providers, Video Productions, Authoring Houses are not allowed to use DVD Logo on their own, even if they write video contents on DVD discs by themselves. It is because the businesses are not eligible for our Licensing programs.
Only when DVD Video discs are replicated by one of our Licensees, the businesses may use DVD Logo Under the Licensee's Instruction and are suggested to contact the licensed replicator that replicates the DVD Video discs. You may obtain the DVD Logo data and the information regarding how the DVD Logo should be used. (Please also refer to F.A.Q. "DVD Logo" Q.1-4)

Pav. dv3888nr horizontal line on DVD image and other glitchy things

Whenever I play DVDs I have problems. Lately, its been a horizontal line or split across the DVD image. I also get all kinds of burps and hiccups, and picture separation from sound that is usually solved by tapping in the mousepad. (Weird!) This gizmo is still under warranty but I'm out of the country for a few more weeks.

Yes, Apple is working on it. The information I gathered from AppleCare is that there is a "capture" procedure in US for those who don't like the lines on their machine.
At this time, as there is not such a procedure in Europ, my decision is to return mine. The only way to return your PB is to call the AppleStore from which you bought it and ask them for a refund (if you are within the 7 or 14 days depending on the Country you bought it from) or an exchange .
Applecare will only accept a repair, by the local Apple Certified center, but AppleCare is country specific which means that an applecare bought in Europ will not work elsewhere. Personnally, I declined the repair, because we all know that the defect has not been identified yet by Apple US, so that you can imagine what the local repair center could do !!!
PS : I just identified the EXACT same line issue at my working place on a Sony LCD screen connected to a G5 DP 2Ghz. Strangely enough, the LCD has also colour set up problems. Moreover the same configuration at home (same SONY screen, G5 DP 1,8 Ghz) has no lining problem. This is the definitive proof to me that every lined screen are defective, even if hundred of them have been recently released.
PB 1.5 Ghz & 1.65 DL, G5 DP 1.8Ghz , G4 400 Mac OS X (10.4.3) airport express, iPod 3 & video

Creating the dvd with 9-06 files.

Hi, I have just downloaded the 5 parts for the 9-06 x86 dvd. After applying this command:
cat sol-nv-b46-x86-dvd-iso-a.zip sol-nv-b46-x86-dvd-iso-b.zip sol-nv-b46-x86-dvd-iso-c.zip sol-nv-b46-x86-dvd-iso-d.zip sol-nv-b46-x86-dvd-iso-e.zip > Solaris-9-06-dvd.iso
All appears well, until I go to burn the dvd image (Solaris-9-06-dvd.iso) the file is 2.4 GB, Gnome reports that the file is not a valid disk image. I am using SLED 10 version of Linux and have burnt a few dvd's with just a right click on the file and select the "write to disk" option.
Anyone know what's going on here?
Thanks for any assistance.
Cheers from Peter.

I think you need to unzip each file before you try to concatenate them.
That's what seems to be stated in the Download and Burning Instructions page at Sun:
http://www.sun.com/software/solaris/download_instruction.xml

How the DVD image on screen varies in size .....

Similar Messages

Maybe you are looking for