How the Element panels are mapped in SpeedGrade CC

Hi,
We've just posted some documents on our website Support page that provide details of how the Element panels are mapped in SpeedGrade CC.
See http://www.tangentwave.co.uk/support/documents/ElementSpeedGradePanelMaps.zip
The only part that isn't covered is the Stereo3D controls.
Don't forget you can also make up a keypress map so you can also control Premier
For details on how to do this see http://www.tangentwave.co.uk/support/documents/KeypressAppQuickGuide.pdf
Cheers,
Chris

That is what ColorMatch2 is there for ... to match to a snapshot you've got in the snapshot listing. Check the documentation for this, as it is something that is explained there. The process is to click on the camera/snapshot icon lower right of the program monitor panel ..
... which brings up a twin-view monitor and the most recent snapshots you've made within Sg. Pick one, or navigate to a different snapshot, and using the "Reference" right-side set of three controls, choose your dark, light, & mid value. Then do the same using the left-side set of three controls from the current spot in the playhead of the footage you're grading. Sg then tries to map everything else out accordingly.
Neil

Similar Messages

  • Could you explain how the read-write-backing-map-scheme is configured in...

    Could you explain how the read-write-backing-map-scheme is configured in the following example?
    <backing-map-scheme>
        <read-write-backing-map-scheme>
         <internal-cache-scheme>
          <class-scheme>
           <class-name>com.tangosol.util.ObservableHashMap</class-name>
          </class-scheme>
         </internal-cache-scheme>
         <cachestore-scheme>
          <class-scheme>
           <class-name>coherence.DBCacheStore</class-name>
           <init-params>
            <init-param>
             <param-type>java.lang.String</param-type>
             <param-value>CATALOG</param-value>
            </init-param>
           </init-params>
          </class-scheme>
         </cachestore-scheme>
         <read-only>false</read-only>
         <write-delay-seconds>0</write-delay-seconds>
        </read-write-backing-map-scheme>
    </backing-map-scheme>
    ...Edited by: qkc on 30-Nov-2009 10:48

    Thank you very much for reply.
    In the following example, the cachestore element is not specified in the <read-write-backing-map-scheme> section. Instead, a class-name ControllerBackingMap is designated. What is the result?
    If ControllerBackingMap is a persistence entity, is the result same with that of cachestore-scheme?
    <distributed-scheme>
                <scheme-name>with-rw-bm</scheme-name>
                <service-name>unlimited-partitioned</service-name>
                <backing-map-scheme>
                    <read-write-backing-map-scheme>
                        <scheme-ref>base-rw-bm</scheme-ref>
                    </read-write-backing-map-scheme>
                </backing-map-scheme>
                <autostart>true</autostart>
            </distributed-scheme>
            <read-write-backing-map-scheme>
                <scheme-name>base-rw-bm</scheme-name>
                <class-name>ControllerBackingMap</class-name>
                <internal-cache-scheme>
                    <local-scheme/>
                </internal-cache-scheme>
            </read-write-backing-map-scheme>

  • How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

    Dear Experts:
    could you please share with me the knowledge for below topic:
    How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
    how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
    Is this SAP standard function OR there need an enhancement to do that?
    I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
    Best regards,
    Andy

    Hi, Gopi,
    Glad to see your feedback, but i still have question on your feedback:
    which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
    And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
    Below is the example and another question:
    what the relationship between the pricing procedures at service PO item level and service line item level?
    1. The freight cost in shipment cost document—including used condition type and pricing procedure
    The pricing procedure of shipment cost document
    2. The freight cost in service entry sheet—including used condition type and pricing procedure
    The pricing procedure of service entry sheet--the pricing procedure at service line item level
    3. The freight cost in service PO item—including used condition type and pricing procedure:

  • Finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

    finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

    This problem occurs after I move a file or files to trash. If I remove one file, then the sequence is one file off, if I move two files to trash then the sequence istwo file off. For example, if I delete file 1 and highlight (click on) file 3, then the cover flow panel shows file 2, when it should show file 3.

  • In Develop mode not all of the adjustment panels are showing.  The basic panel is not evident.

    In Develop mode not all of the adjustment panels are showing.  The basic panel is not evident.

    Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

  • Pls, help. How the bidder licenses are considered?

    Hi,
    I'd like to know if someone have experience or documentation about how the bidder licenses are counted in SRM.
    I mean in one customer are worried about they want to invite a lot of vendors to participate in several bid invitations, they argue that they are going to work with the winners, offering other services but they would prefer don't consume a license in bidder they aren't going to work with. So they would prefer lock them.
    Would this bidders be counted in the number of licenses?
    Someone know where I can get information about this matter. I know that finally they have to speak with the account manager but I suppose that what kind of licenses and how we can distinguish them should be accesible for us.
    Thx

    Hi
    <b>Please go through this -></b>
    Bidding Engine comprises normal bidding and live auction. They are a part of SRM and you don't require separate license for that. In term of licences, Bidding Engine is priced separately as an engine.
    But in term of solution, it is already there & available in the system:
    - one transaction for the purchaser
    - one transaction for the supplie
    - Live Auction Java part
    There is nothing special related to licence to be activated in SRM to use Bidding Engine.
    <u>Related link -></u>
    Re: CCM 2.0 Vs SRM-MDM Catalog?
    Re: How to find Bidding engine installed.....???
    Re: Bidding Engine Licence
    <u>Hope this will help. Do let me know.</u>
    Regards
    - Atul

  • FFx 37.0.2 The preference panels are sometimes cut off so I can't use them.

    Some of the preference panels are the wrong size, and don't show all the choices. I noticed this, and found out about "refreshing" Firefox, so I tried that and it fixed it initially, so I was able to reset them, but now a day or two later, I notice the same problem.
    Screenshot is attached. Using a Mac and OS 10.10.2

    That could be a problem with the theme that you use in case you have installed one.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How the tax amounts are linked to PO

    hi
      i have created a tax code T1 with ED, Cess and 4% tax.
    when i create a PO with tax code T1 the tax amounts are calculated correctly and brought in PO against a condition type Ztax.
    Now i checked the procedure and ztax is included in the procedure but without any from condition number.
    so i would like to know how the procedure gets the tax amounts in PO.
    is there any separate settings which says that the taxes are to be got from the taxcode in PO.
    please reply
    Raja

    HI Srinivas,,
    By condition number i mean the value that we give in the pricing procedure just next to condition type saying that the particular condition gets the base value from a condition type.
    ex:  for discount condition we give like 10 which means the discount % base value is from PB00 . in this the line number for PB00 will be 10.
    And we are not giving any records in MEK1 for tax since the value gets calculated in the taxcode for every transcation.
    so im wondering whether we need to maintain any records or does any other settings links the value of the taxcode to the  procedure
    thanks
    Raja

  • How the user credentials are transported using BusinessObjects SDK

    Hi, I would like to know in detail how the user credentials is passed with the java call (logon). Are they encrypted during the transport? Which mechanism (protocol, technology) does the sdk use to provide security for the user credentials?
    Thanks

    The BusinessObjects Enterprise SDK communicates with BusinessObjects Enterprise servers using a proprietary CORBA framework via TCP/IP. 
    This is so inter-server and server-client communication can be done transparently from the perspective of the API whether all services are on one or multiple machines.
    You can configure BusinessObjects Enterprise services to use SSL through this communication.  How you would do so is described in the Admin Guide.
    You'd configure the SDK as you would the servers in as described in the Admin Guide.
    For the BusinessObjects Enterprise Java SDK, that means specifying the four Java System Properties (as you would for Java InfoView) to point to the SSL configuration files.
    That takes care of the connection from the SDK to Enterprise.
    Set-up of secure communication from web browser to web app using the SDK is a separate matter.
    By the way, the BusinessObjects Enterprise SDK is fully tested an supported only when used in a web application.  Desktop and standalone apps using the Enterprise SDK are untested.
    Sincerely,
    Ted Ueda

  • How the SAC amounts are posted to G/L accounts through Inbound Invoic Idocs

    Hi EDI/ABAP experts,
    Can anyone please tell me wow the SAC amounts are posted to G/L accounts through Inbound Invoic Idocs??
    Can anyone point me to the code that permits INVOIC02 IDocs to post the SAC (service allowances and Charge) amount to particular G/L account??
    What is the logic??
    Thanks,
    Creasy
    Edited by: Creasy Matthew on Apr 27, 2009 10:41 PM

    Hi Sunil,
    When ever you prepare a billing document it creates an entry in General Ledger as Trial Balance has to be generated for the company all the expenses for a company should be recorded in GL. So that a company can see view their profit/loss figures.
    As Billing is a sales related transaction it creates an GL Entry where in
    Debits    --> Customer Account
    Credit     --> Sales Revenue Account
    And when the Customer Makes a payment with reference to the bill
    One more GL Entry will be created i.e
    Debit     --> Bank Account
    Credit    --> Customer Account
    With this we can track the customer balance (What ever balance is there in Customer account is customer Balance)
    I think this is very clear with respect to the question you had asked.
    Reward points if it helps.
    Regards,
    Sreekanth

  • How the user credentials are transported using OBIEE webservice

    Hi, we're trying to using the OBIEE web service api to interface with OBIEE, and would like to know in detail how the user credentials being passed with the web services request?. Which mechanism (protocol, technology) do this WebService use to provide security for the user credentials?
    Thanks.

    The Oracle BI Web Services API is a SOAP-based API therefore all the information is sent via HTTP requests containing XML messages. By default OBIEE will run the Presentation Services Web App server in non-secure mode. Therefore all the user credentials will be basically sent in clear text and will be subject to "a man in the middle" attack. It is possible to setup the Presentation Services to run in securely using HTTPS but I am unsure if the API will work over HTTPS.

  • How the Photosmart's Google Maps App changes life.

    HP Product Expert for the Officejet Pro X Series.
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!

    even well after the wireless internet connection had been lost
    You must have been traveling in an area with lots of wifi routers. You don't have to be logged in to a wifi router for the Skyhook System to calculate your location if it can find other wifi routers in the area that are in it's database. You DO have to be logged in to a wifi router to be able to access the Google Map data (as you found out).

  • Just downloaded Ps 2014. When opened the screen panels are all in a font of about 2.

    I've uninstalled and reinstalled. I have changed the font in the interface but nothing changes. Restarted.
    I had Ps 2012 with Elements. I don't see Elements as part of the 2014 version. Did not upgrade. The difference in downloads is on the 2012 version I had purchased then downloaded. For the 2014 I joined the Creative Cloud. Not sure why that would make a difference but giving as much info as I can.
    I'm also working on a brand new computer. Lenovo Yoga Pro 3. 8GB, 512, Windows 8.1.
    Please help.

    To get the new UI you need to hide the menu bar. To do that in the View menu select Toolbars, then click on the "Menu Bar" entry.
    If you need access to the menus you can press either Alt or F10 to temporarily display them.

  • Can you 'favourite' clips, and have an option to show which clips in the project panel are currently in a sequence?

    Anyone any ideas on the above questions?

    If you click on the text it will bring the playhead to that position.

  • How the media files are stored in Oracle 10g database

    I guess they have introduced new datatypes to handle multimedia objects( audio file, video file, images, etc etc). Can anyone tell which is the data type which is used to handle the media files in Oracle 10g database.
    thanks,
    shekar.

    Check this out.
    http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10840/mm_uses.htm#sthref433

Maybe you are looking for