How the heck do i get more ring tones on my phone i purchase them and they go into my music but not ring tones any one no how i can put more on my ringtones plz n ty

how the heck do i get more ring tones on my phone i purchase them and they go into my music but not ring tones any one no how i can put more on my ringtones plz n ty

Make sure your own music files are saved in the proper folder (Digital sounds) whether in your memory card or the phone memory, the location should still be:
Sound Clips > Digital Sounds.
If your songs/mp3s are saved anywhere else, it will not show up as a selectable ringing tone.
You can move your songs through File Manager on your phone if they are in the wrong location (Options > Move to folder).
Hope that clarifies it for you.
"Try not. Do or do not, there is no try."
If you found someone's comments helpful or like what that person has to say, please give some Kudos to the post!

Similar Messages

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • HT1338 i need to install OS X 10.6.8 or newer.. I have 10.5.8, how the heck do I get 10.6.8 on my macbook pro

    i need to install OS X 10.6.8 or newer.. I have 10.5.8, how the heck do I get 10.6.8 on my macbook pro

    Buy the install DVD for Snow Leopard from Apple
    Allan

  • When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

    When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    1) The older version of Bonjour can not be removed. Contact your technical support group.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • I had to restart my mac desktop because it froze now I went to restart it and all its doing is beeping at me. Does any one know how to get it to start again Please help

    I had to restart my mac desktop because it froze now I went to restart it and all its doing is beeping at me. Does any one know how to get it to start again Please help

    Welcome to the Apple Support Communities
    It shows a hardware issue. How many beeps do you hear? See > http://support.apple.com/kb/HT2538

  • I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

    I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

    iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

  • I have been opening up my photos from My Pictures folder and Elements 12 opens up but the photo doesn't appear in the image screen.  Over the weekend it was working fine.  I tried the other photo software I have and they open up in those but not the eleme

    I have been opening up my photos from My Pictures folder and Elements 12 opens up but the photo doesn't appear in the image screen.  Over the weekend it was working fine.  I tried the other photo software I have and they open up in those but not in the elements 12.

    Which operating system are you running on?
    How are you trying to open the photos?
    - from windows explorer? - double licking or right clicking and selecting Open with?
    - by loading the editor and go to File -> Open?
    Looking back at your other threads you seem to have had this problem before - what keeps changing?
    Brian

  • Calendar in iCloud. It was not deleted. Any one knows how to retrieve it?

    I have four calendars hosted in iCloud. One of them just disapeared. It was not deleted. Any one knows how to retrieve it? I had years of information there.

    Double tap with THREE fingers to turn zoom off. Then go into Settings>General>Accessibility and turn it off for good.

  • I recently bought a few new songs from iTunes and they transfer to my iPhone, but not into the Playlists I dragged them into

    I recently bought a few new songs from iTunes and they transfer to my iPhone, but not into the Playlists I dragged them into

    Do the problem songs play in iTunes on the computer?
    Is Settings>iTunes and App Store signed into the account that purchased them?
    Can yo redownlod them directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         
    Do they show up in the Purchased list?
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing/loading those songs?

  • I bought my software pack iWork 2008 at the apple retail store and I cannot get any updates and apple App Store won't help me.   Does any one know how I can get the upgrade without paying full price for a second time? I paid $99 for the iWork family pcan'

    I cannot believe that apple is refusing to help a customer who bought and paid for iWork software just because I bought it from the retail store the App Store says they cannot allow me to upgrade.  I have never heard of such.  It should to matter where I got it i bought apples software and I don't et how the retail store can be different frothe App Store my god its all still apple.  So stupid.  I will not pay full price for the upgrade.   Also I purchased Logic Studio and 2 days later the upgrade came out and they will not let u upgrade ?  I think there should be at Least a 30-45 day window if u purchase software and they release the upgrade u should get not.    It's not like apple doesn't make enough money already.  

    iWork '08 & 09 installed from the retail disk or from the downloaded trial must be updated through Software Update. Those installations will not be recognized as installed by the Mac App Store. In Mountain Lion Software Update has been "rolled into" the Mac App Store. Choose Software Update from the Apple menu just like you always have & the Mac App Store will launch. Depending on what you have that needs updating you may see two sections in the MAS window.
    But, as always, if you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '08 folder in Applications. That iWork folder must be named iWork '08. If it doesn't have the '08 Software Update won't find them & the updaters won't work.
    If you are running Pages 3.0.3, then you do have the latest version of Pages from iWork '08. If you want to upgrade to iWork '09, you will need to purchase the new version, just like everyone else. The good news is that you can buy just the individual iWork apps - Keynote, Pages & Numbers - that you need or want for $20 US each from the Mac App Store & then install them on as many Macs as you need using the same Apple ID.

  • How the heck do i get a firmware upgrade from my computer to the router?

    I went to this site here to try and make my router work. It is a WRT54GS wireless router, and I saw where i could download some firmware upgrade, so I clicked on it and saved it to my desktop. It is a .bin file. Now how do I get that file to the router?????
    The router was working until today and now it isn't sending out a wireless signal. However, it is still connecting my computer to the internet through its wire (modem to router, router to computer with cable). But when I open the Easylink software, it says that the internet connection is not working, even though the little green light is on for "wireless" on the front of the router.
    But anyway, how do I get this downloaded file onto the router??? There isn't any usb ports on the router to connect to it. There isn't anything in the Easylink software that gives me that option, or if there is they hid it pretty good. They really should explain how to do this, or do they expect everyone to have a degree in networking or computers or something? I need some help here 

    As sabretooth suggested,Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now,Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • I've the yontoosilentmacinstaller on my MAC. How the heck do I get rid of it?

    How can I get rid of Yontoo? It's driving me nuts!!

    From the Yontoo support site:
    Uninstall from Firefox or Google Chrome (Mac): In the top menu, go to Tools > Add-ons. Select the Yontoo logo and then clickUninstall.

  • How the heck do I get my "My Book" USB hard drive discovered on my network?

    Most everything on the Mac has been EASY but I can't for the life of me figure out how to get my usb drive to be seen my my imac let alone any other device on my network.  I really need to do a backup via Time Machine but the imac doesn't see the hard drive. 
    What am I doing wrong?  I have it connected to the only USB port on the Airport Extreme.  Windows PC doesn't see it either and the drive IS powered on. 
    HELP

    See this migrate iTunes library post.
    tt2

Maybe you are looking for