How the longer-prefixes option works

take this link as an example
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfindp2.html#wp1022511
how can the longer-prefixes example used throw up the networks including 10.134.0.0
The following is sample output using the longer-prefixes keyword. When the longer-prefixes keyword is included, the address and mask pair becomes the prefix, and any address that matches that prefix is displayed. Therefore, multiple addresses are displayed.
In the following example, the logical AND operation is performed on the source address 128.0.0.0 and the mask 128.0.0.0, resulting in 128.0.0.0. Each destination in the routing table is also logically ANDed with the mask and compared to that result of 128.0.0.0. Any destinations that fall into that range are displayed in the output.
Router# show ip route 128.0.0.0 128.0.0.0 longer-prefixes
Gateway of last resort is not set
S 10.134.0.0 is directly connected, Ethernet0
S 10.10.0.0 is directly connected, Ethernet0
S 10.129.0.0 is directly connected, Ethernet0
S 172.30.0.0 is directly connected, Ethernet0
S 172.40.246.0 is directly connected, Ethernet0
~~~~~~~~~~~~~~
I can't see how the binary and can give this

Thank you Suda.
Could you please help me about how to access the links related to global parent update. I tried with my "S" number but it was not possible to access ... The message that I received was:
Error Message - Access denied (R/3)
What happened?
You do not have permission to access this Object
What can you do?
Please contact a consulting adminstrative
Error code: WEBSMP109-20080430234836-0015
Error details: 2491DD9-702/1A053/3162-71A9CFA5-3CB9265-2992F9
Service Name: SAPIDB
Service Server: WEBSMP109
Process-ID: 4268
Thread-ID: 4324
Sorry for any inconvenience.
Your SAP Service Marketplace Team
thanks!
Salomon Ponce

Similar Messages

Spell Check in New Forums- How The Heck does it work?

Can somebody please tell me how the spell check works in this new forum format? I click on the abc icon and it does nothing. I do a two finger click on a word that is misspelled and it give me Insert Options. I really like the new format but hate the spell check. Can anyone offer advise? Thanks.

The built-in ASC spell checker is -- to put it kindly -- quirky. First, you must turn it on using the 'abc' tool on the right in the editor toolbar. (When it's on, it highlights.) But it won't stay turned on if you click on the tool before you enter any text -- it will just tell you that no misspellings were found & won't stay on. It also sometimes fails to check the last word if followed by a space. You can tell it to ignore misspellings, but you can't tell it to learn words because the spell-checking dictionary is actually on the servers running the site, not on your Mac or PC.
But from your remarks, you probably aren't even using the built-in checker. Instead, I suspect you are trying to use the far superior system-wide one built into OS X. The problem with that is the ASC editing tools are powered by Javascript supplied by the Jive SBS software running the site. Because that is platform independent it doesn't know anything about OS X's contextual menu (which includes suggestions for misspellings, the Dictionary lookup, & so on).
So to make a long story short, what happens when you try to right click on a word the OS X checker has underlined in red, instead you get the Javascript's response to a right click, which brings up the editor's insert/alignment popup menu instead of the OS X contextual menu.
The solution is to control click on the word -- believe it or not, within the ASC editor window a right click & a control click are not the same thing! You literally have to hold down the control key on the keyboard when you click to bypass the Javascript's right click response.
To make things that much more confusing, this only applies if the pointer is not over empty space in the editor window, which in this case excludes lines that have any text on them, including invisible text like spaces or returns. (To see what I mean, drag the tab at the bottom right of the editor window down so there is a lot of empty space below what you have typed. In this empty area, right & control clicks both bring up the OS X contextual menu, but anywhere in the text you have typed, they behave differently.)
In short, the problem is not that Apple has changed how the buttons or clicks work, it is that the new software that runs the site (not developed by Apple) does.
Hope this helps.

How the ASR memory options shipped when bought as spares?

Does anyone knows how the ASR memory options shipped when bought as spares?
Can i insert a 2GB memory on the ASR 1002-X as stated in the memory options in this link, http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/data_sheet_c78-441072.htmlIf yes, then what could be the part code number?
Can I just upgrade the ASR 1002-X from 4GB to 6GB of memory instead of 8GB?
Can you clarify if i will choose the following part codes, how will this be shipped?
M-ASR1002X-4GB=, 2 units 2GB memory or 1 unit 4GB?
M-ASR1002X-8GB=, 4 units 2GB memory or 2 units 4GB?
M-ASR1002X-16GB=, 4 units 4GB memory?
And last, how can we insert memory on the ASR 1002-X, does it needs to have identical memory installed for the 4 slots, or we can just upgrade it like, 2 x 2GB installed on the first slot and then i'll add 1 x 4GB?
Thank you!

Hello, Jessica.
The Cisco 1000 ASR series RP memory spares are usually sold as pairs. For example, 2GB (M-ASR1K-RP1-2GB=) are sold as a pair of 1 GB modules and the 4 GB memory spare (M-ASR1K-RP1-4GB=) is sold as a pair of 2 GB modules. It would be best to verify this with your Cisco sales representative. Are you already working with any Cisco partner or rep about this one, by the way?
Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

How the Sun Java Forums Work (Briefly)

I am wondering if anyone could give me a brief overview of how the Java sun forums work -- esp. when someone creates a new thread.
How exactly does the JSP know to link to that thread? Is it generating a unique ID from the database or using it's own custom code? How does it point to that thread? (I'm SO FRUSTRATED. I've tried to figure this one out for about a MONTH.)
I've started to create a help desk, where it takes form data and posts it to the database. (That issue solved.) The database assigns it a unique ID -- primary key. I'm having trouble displaying the problem record for that ticket ID. (I'm new to Java and really been pulling my hair over this one for about a month.)
Let me go into some more detail:
I have these form objects:
- Name
- Technical Summary
- Severity
- Problem
This is a standard html form page. The standard html page posts to a JSP page, where the JSP page uses a prepared statement to insert the form data into the database. The query page, (query.jsp) has a table, which only shows TicketID, Name, Technical Summary, and Severity. Obviously, the TicketID is an int and generated by the DB, as 1, 2, 3, 4, and so on...
So if someone created an issue it'd be assigned a unique ticket id. Note that from the query page, it DOES not show the problem. I WANT there to be a link to get the problem record in that row.
If anyone could help me out with this one, that would be great.

Below is the CORE JSP Query Code. Obviously, I did NOT post the HTML b/c that would look **REALLY** weird. Any help on resolving my problem, would relly be helpful! Please hep! :)
<%@ page import="java.sql.*"%>
<%
String first_name = user.getFirstName();
String last_name = user.getLastName();
%>
<%
String userid = user.getUserId();
%>
<%
Connection conn = null;
Statement stmt = null;
ResultSet rs = null;
try {
Class.forName ("com.mysql.jdbc.Driver");
conn = DriverManager.getConnection( "jdbc:mysql://localhost:3306/helpdesk", "root", "password" );
stmt = conn.createStatement ();
rs = stmt.executeQuery ("SELECT * FROM history WHERE userid = '"+userid+"' ");
%>
<% while( rs.next() ){%>
<%
int ticketid = rs.getInt("ticketid");
String technical_subject = rs.getString("technical_subject");
session.setAttribute("technical_subject", technical_subject);
%>
<TR>
<TD width="76" align="center">
 <%out.println(ticketid);%> </TD>
 <TD align="center" width="131">
 <%=rs.getString("severity")%> </TD>
 <TD align="center">
 <%=rs.getString("issue_type")%> </TD>
 <TD align="center">
 <%out.println(technical_subject);%> </TD>
 <TD align="center">
 View
 Complete Issue</TD>
</TR>
<%}%>
</TABLE>
</BODY>
</HTML>
<%
}catch
 (Exception e){
out.println("There was an exception. Stack trace will be printed to the error log.");
e.printStackTrace();
System.out.println ("A fatal exception occured when fetching the database results. See the stack trace error for more information. Verify you are requesteting the correct data type");
}finally{
//this is important. You should close all three to free up resources. Always. In a finally block.
rs.close();
stmt.close();
conn.close();
%>

How the Drill down functionality works if the source is Bex Query

Dear All,
How the Drill down functionality works if the source is Bex Query through the query browser in Dashboard 4.1
Please let me know process.
Thanks
Regards,
Sai

Hi sai,
Drill down can be done by two ways.
1. you need to bring all the data in one shot to the spreadsheet and then by using the components you can achieve it. Below given link explains in detailed about that.
Filtering Through Combo Box
2. you can use different set of query to pass the value from one set to another to fetch the data using the prompt. please check the below which explain them.
Difference between "When value Becomes & When value Changes"
Revert any clarification required on this.
--SumanT

How the stock determination process works

Hi All
Can any one tell me how the stock determination process works in inventory management?
if possible give me the steps involved in stock determination process .
Regards
M S K

Hi
i hope this helps
http://help.sap.com/saphelp_47x200/helpdata/en/d8/2f3746996611d1b5480000e82de955/frameset.htm
regards
maniraj

How the below query is working

Hi,
I am newly joined in the group.
the emp table has 5 rows as below
100 ram 10000.00 10
200 kumar 15000.00 10
300 william 20000.00 10
400 ravi 25000.00 10
500 victor 30000.00 10
i execute the below query
select ename,sal from emp_test where case when sal < 10000 then sal + 1000
when sal < 20000 then sal + 2000
else sal
end < 20000
it gives the below output
ram 10000.00
kumar 15000.00
How the above query is working?
Please explain. thanks in advance

If you want it to show the changed salary, it has to be in the select line not the where:
select ename,
 (case when sal < 10000 then sal + 1000
 when sal < 20000 then sal + 2000
 else sal
 end) sal from emp_test
where case when sal < 10000 then sal + 1000
 when sal < 20000 then sal + 2000
 else sal
 end < 20000

Hi I cannot make the accessibility zoom option work. What are the commands on a non Mac keyboard?

Hi I cannot make the accessibility zoom option work. What are the commands on a non Mac keyboard?

If you want to convert SWF to DVD in freeway, find a converter to convert SWF to normal video such as: SUPER, then burn to DVD.

How the 7344 trajectory generator works?

It says that the 7344 trajectory generators calculate the instantaneous position command that controls acceleration and velocity while it moves the axis to its target position in the 7344 user manual.
What I want to know is that how long it will take to calculate the instantaneous position command ,and does it calculate based on not only the position commmand that the computer send to it but the feedback signals?
Another question is:suppose I send a position command of 50rad,then how the trajectory generator works,what I means is that if the trajectory generator calculate the whole position trajectory based on the move constraints at a time or it will calculate every sample period?
Infact i am not clear how it works?can you give me some information?
Moreover how could I send a continuous position command to the card and make the card response in real-time ?For example I send diffent position command every 0.5ms and i hope the system can move to the preconcerted position every 0.5ms.Can the 7344 card make it ?

Hi Robert
In order to perform a continuous move ,i can send a new target position to the board repeatedly ,but i am confused with following questions.
First,i send a target position to the card and through the multistart the card starts to move,maybe this move can take several update periods .Suppose that it will take two update periods to accomplish the move,and after one and a half update period i send another new target position ,so I do not kown if the card immediately start a new move ,based on the current position and new target position by ignoring the last half period or it will accmplish the last half period and then start a new move.
Second ,if it is the first case i would think that when the pid update period is equal to or more than the time intervals between the new target positions,then it will not work ,because everytime it is the host computer that starts the move.

How can I learn the details of how the iBA video optimizer works?

Although I appreciate the work done by the vide optimizer in iBooks Author, results vary depending upon the characteristics of the video I submit to it. Sometimes this is acceptable, sometimes not. I came to this conclusion by adding different versions of the same video clip to the iBA Media Widget and then deconstructing the resulting *.ibooks file and analyzing those video files using MediaInfo. I think that if I could better understand how the optimizer works I could get more acceptable results.
So where can I learn more about how this optimizer works?

In PO screen(me21n) delivery item tab over-delivery & under- delivery % is there.While creating PO you have to set it.Based on that goods receipt will be done.

How the Replacement path is working in the variable.

Hi SDNers,
Can any one give the scenario, how the processing type "Replacement path" is working in the variable.
Thanks,
Satya

Hi,
For example..
If you want to find the Ton 10 customers for company you will develop a query and based on some condition you will get the top 10 customers.. and again if you want to see the top 10 customers sales or products what they purchased then you go for another query to develop. In this case.
In the second query create a variable on Customer object with Replacement path as processing type in that you have to mention the previous query (i.e., top 10 customers). Then it gets the values of top 10 customers from the previous query and generates the report for requirement you want.
Hope this is clear.
Veerendra.

Need to know how the AUTO BCC feature works on T-Mobile USA

HI,
am hoping to get an explanation on how the Auto BCC on T-Mobile USA works in the background. I have an 8900 that is setup on exchange using T-Mobile account settings and uses the Outlook Web access email.
When emails are sent from the device, a copy gets sent to the sent items which is fine. I would like to know that if I use the auto BCC within T-Mobile if those email are being sent from exchange or the Blackberry servers in Canada? Also will the emails that are forwarded be sent to the sent item of the exchange server?
thank you in advance

Hi teckystuff,
Is your email is integrated in your BlackBerry Internet Service account as an OWA account? If so, when you are sending from your BlackBerry you are still sending from your exchange account. Your device is using the BlackBerry Internet Service to communicate with your exchange account so the BCC sent from your device email integration is still being sent from your exchange email account whether on the device or from Outlook or OWA. Any email you send or forward from your device should be posted to your sent items folder on exchange.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

How the master data delta works

hi, experts
i want to know how the master data delta (ale pointer) works? what the principle is? for example, the 0asset_attr datasource has 20 fields, any of the 20 fields changes can triger the delta? if i enhance 3 fields to the asset master data, does the 3 fields change can trigger delta?

Application Link Enabling (ALE) change pointers are configured and used to be able to trigger processing of an outbound process, such as data extraction, and determine only those Master Data records that have changed. This is all done without the need for a program being required to determine deltas.
SAP delivered program, RBDMIDOC runs periodically and deterlines if change pointers have been updated for specific message types. New or modified Master Data records are automatically initiated via ALE. RBDMIDOC references the correct IDoc program for any given type via TBDME (the TBDME table also cross-references message types with the ALE change pointer table) so that the data goes where it should and is processed accordingly. Tcode BD60 is the interface in SAP for maintaining the TBDME table.
When a change is made to the standard content Master Data record, the delta will be identified. Any columns that have been enhanced to the Master Data will not be identified as a delta because enhancements are a post-extraction process and only get updated after the standard content structure has been populated.

How the New Psyhic Engine Works?

Is anyone knows how this new psyhic engine works? Because
this init() command does nothing no matter if add gravity or
simulate() command, i tried to make it work in the same way as
Havok did, but nothing happens, no errors, nothing. Any
suggestion?

Maybe im still missed something, because i already use
simulate() on exitFrame. I think im thinkin' in the way of Havok,
but heres the simple code where "engine" is the physics and
"crateroom" is the 3D world with some boxes, and with some balls in
the air. With Havok the balls falls down, but with Physics they are
still in the air, and the world.isInitialized returns 0,that means
the world initialization is not succeeds...
property pInitialized
on beginsprite me
initializePhysics()
end
on exitframe me
member("engine").simulate()
end me
on endSprite( me )
if (pInitialized) then
member("engine").destroy()
pInitialized = false
member("crateroom").resetWorld()
end if
end
on initializePhysics
if (pInitialized) then
member("engine").destroy()
end if
pInitialized = true
member("engine").init("crateroom",vector(1.0,1.0,1.0),#automatic,0,5)
member("engine").gravity = vector(0,-9.81,0)
put "Initialized Physics"
end initializePhysics

Does the Guest User option work with 10.9.4 on Airport express?

The reason I ask is that the guest user option doesn't with the Airport Time capsule I bought last week and the retailer is saying tough:)
Thanks

One idea that was suggested y-day was to turn off the cable router, while on the Help call, and see if the Guest Network would work in Bridge mode.
The modem/router would need to have an option to be configured to operate as a modem only. Most don't. Whether or not that might be possible with your device would be question for your ISP.....who will probably not be very enthusiastic about this.
Even if it might be possible to configure the modem/router as a modem, you would want to make sure that the ISP will offer support for you in the event of connection difficulties. They may not support this type of configuration.
If you have the make and model number of the modem/router handy, I will see if I can locate a setup guide for the device to learn more about it.

How the longer-prefixes option works

Similar Messages

Maybe you are looking for