How the master data of multi language is shared in the info cubes

hi frindz,
how the master data of multi language is shared in the info cubes
                                                                 bye bye
                                                                  venkata ramana reddy.G

Hi Ventak,
In the infocube you have the key. Then you have a text master data table that has as key (for the table) the key of the value (the one in the cube) and the language, and the text in that language as another field (short, med, long).
Hope this helps.
Regards,
Diego

Similar Messages

  • How the master data delta  works

    hi, experts
    i want to know how the master data delta (ale pointer) works? what the principle is? for example, the 0asset_attr datasource has 20 fields, any of the 20 fields changes can triger the delta? if i enhance 3 fields to the asset master data, does the 3 fields change can trigger delta?

    Application Link Enabling (ALE) change pointers are configured and used to be able to trigger processing of an outbound process, such as data extraction, and determine only those Master Data records that have changed. This is all done without the need for a program being required to determine deltas.
    SAP delivered program, RBDMIDOC runs periodically and deterlines if change pointers have been updated for specific message types. New or modified Master Data records are automatically initiated via ALE. RBDMIDOC references the correct IDoc program for any given type via TBDME (the TBDME table also cross-references message types with the ALE change pointer table) so that the data goes where it should and is processed accordingly. Tcode BD60 is the interface in SAP for maintaining the TBDME table.
    When a change is made to the standard content Master Data record, the delta will be identified. Any columns that have been enhanced to the Master Data will not be identified as a delta because enhancements are a post-extraction process and only get updated after the standard content structure has been populated.

  • Master Data in Second Language through Web UI

    We have enabled Unicode conversion and now want to maintain the BP Master Data in another language too.
    In the GUI, we get the button "International version" which leads to the screen where the General data can be maintained in the second language.
    However, I seek your guidance how to bring on the same  / similar button in the Web UI for the same.
    Thanks and Regards,
    Tariq

    Thanks DJ,
    You suggestion works fine, thanks for the same. But I have the following issue:
    By the suggested way it was created in GUI - International version - but when viewing in the Web UI the second language data was not visible and had to be maintained again.
    And vice versa too, meaning that the second language data maintained in the Web UI wasn't visible in the GUI either.
    What is the cause, any suggestions?
    Regards,
    Tariq

  • Enhancement in the Master data Tab in the BP transaction

    Dear all,I need to create news fileds in the Master data tab in the BP transaction. This fields are not imput fields but the content of this fields are customer specifics number which will be generated when creating a BP.  This numebr will be generated in the BUT000 Table in the BP number field.
    My Question is : How can i create New Fields in the Master Data Tab, is it possible to use the EEWB for that or not ?
    thanks in advance for ur help.
    liliane

    Hi liliane,
        You can use eewb however it should be used very cautiously as once changes are made there are  tables and attributes that are created correspondingly. I mean activities like Bdoc creation for the fields added happen simultaneously and you may not be able to revert changes.
    Thanks,
    vivek

  • What are the master Data in SAP SD

    Hi All,
    I have a question. Even though its a naive question please bear with me.
    what are the master data in SAP SD.
    These are the one's  i know.
    1)   Customer Master Data
    2)   Material  Master Data
    But what i want to know is does the following ones come under master data?
    1) Price master data
    2) Transporters master data(we are using transportation management)
    3) Route master data
    4) Customer material info records
    5) Credit master data(iam using credit management)
    What will be the master data for Transportation management(module), CIN(country India version), credit management & rebate processing
    Thanks for your valuable time & knowledge.
    Regards,
    Pavan

    Hi Pavan,
                  Just to add some more valuable information.
    <b>Organisational master data</b> : Every company is structured in a certain way. In order to work with the SAP System your company structure has to be represented in the system. This is done with the help of various organizational structures.
    <b>Condition master data</b> : In sales and distribution, products are sold or sent to business partners or services are performed for them. Data about the products and services as well as about the business partners is the basis for sales processing. Sales processing with the SAP R/3 System requires that the master data has been stored in the system.
    <b>Material master data</b> : In addition to sales and distribution, other departments of the company such as accounting or materials management access the master data. The material master data is stored in a specific structure in order to allow access from these different views.
    <b>Document master data</b> : The processing of business transactions in sales and distribution is based on the master data. In the SAP R/3 System, business transaction are stored in the form of documents. These sales and distribution documents are structured according to certain criteria so that all necessary information in the document is stored in a systematic way.
    <b>Customer Master Data</b> : or for that matter various business partners, we maintain data for them also called as the customer master data or vendor master data like that.
    Thanks & Regards
    Sadhu Kishore

  • Export the master data from the existing B1 DB and importing to a new B1 DB

    Hi
    Is there any way to export the master data like item, GL, Business partners from the existing B1 database to a newly created DB. (export from the exissitng DB to a new DB as such) so that all the data will be available in the new DB without transactions
    Thanks in advance

    Dear Sanath
    You may use CopyExpress Add on to do the same . Here you can copy masters from one Database to another with out transactions . This process is very easy also. Some of the customizations also u can do the same way.
    Thanks and Regards
    Rashid

  • How to upload the master data from legacy to SAP

    Hi Frends,
    how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
    please clarify me
    Regards
    Sap Guru

    Hi ,
    use LSMW  or BDC for uploading Master & transaction data.
    This work is done by the Respective Functional team.
    Chandra

  • Open hub Services - How to extract the master data related to a object ?

    Hi Gurus,
    I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
    Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
    Can any one tell me how to get the master data extracted in the flat file with associated info object???
    Answers will be highly appreciated.
    Regards,
    Kironmoy Banerjee
    Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PM

    Hi Kironmay
    Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
    - Enter your infospoke in the edit mode.
    - On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
    - This will take you to the Addin implementation/BADI builder.
    - Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
    - The implementation of the BADI is always filter dependant.
    - In the properties tab of the infospoke enter your infospoke under the Filter specifications.
    If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
    - Activate your class
    - From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
    - Here you can enter the code
    - To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
    IF FLT_VAL = 'Your infospoke'.
        T_DATA_IN[] = I_T_DATA_IN[].
    Select zstd_cost from /bi0/pmaterial into table T_return
    For all entries in T_DATA_IN
    WHERE material = T_DATA_IN-material.
    ...Continue with your code.
    Append output from T_return to your output E_T_DATA_OUT
    - Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
    I hope this helps.
    Thanks.

  • How to fill the master data in ecc

    Hi,
             0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
    Regrads,
    devi.

    Hi Devi,
    Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data. 
    BDC and LSMW both are used for loading data into SAP system.
    Or ask even directly they can create in ECC.  If it is for your testing purpose, it is better to ask them to create master in source system .
    Thanks
    BVR

  • How to find all the Master data extract structures and Extractors

    I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
    Question: How to get a complete list of all Master data extract structures and corresponding extractors?
    Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
    How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
    Regards
    Sasanka

    Hi,
    try the table ROOSOURCE and search the data source with string in astrick attr  for master data and for text with text
    This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
    Thanks
    Ajeet

  • How to Lock the master data. R/3 Conflict ESS

    Dear Gurus,
    Please guide me how to lock the master data for a nos of days(say 7 days).
    Recently we had encountered an issue, related to ESS. While Uploading the Time data through t-code: PT60, our core team encountered a problem, that such and such employee number is locked.
    While checking, they identified it, system shown error against those employees, who are accessing their ESS. We check and came to know they are accessing the master data by changing their personal record i.e. address.
    Do we have any other provision to lock the master data without setting the control record to release for payroll.
    Please help .

    Create a custom transaction involving a custom views of table T7XSSSERSRV  with the following field for each service
    "V_T7XSSSERSRV-ISDISABLED"
    when HR wants to lock it, the will enter this table and check this field.
    this will disable the servcies in the front end.
    Once the 7 days are over, HR will uncheck this field. this will re-enable the services in the froint end.
    Hope this helps.

  • How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent

    Hi Experts,
    Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
    Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
    I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
    Please help urgently.
    Advance Thanks,
    BW USA

    If you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
    For example, you want to download 0EMPLOYEE
    1-In PRD, transaction RSD1
    2-Enter 0EMPLOYEE
    3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
    4-transaction SE16
    5-Enter the table name /BI0/MEMPLOYEE
    6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
    7-Execute
    8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
    9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
    Asigns points if useful.
    Regards

  • How to find the size of the master data objects in the BW system?

    Hi,
    We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
    Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
    For example, we have many Texts, Hier & Attributes.
    0COUNTRY_TEXT
    0REGION_TEXT
    0PERSON_ATTR
    0MATERIAL_LPRH_HIER
    Advance Thanks.
    Edited by: BW USA on Feb 2, 2010 10:52 AM

    Hi,
    You can find out all the master data tales used in the BW system by
    Tcode : SE11
    Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
    Similarly for Texts  /BIC/T*  and press F4
    Similarly for Hierarchies /BIC/H-* press F4
    and can know the size of the all tables.
    Thanks,
    Gopal

  • How To Transfer the master data from R/3 to APO System

    hi this is mohamed .i m new to APO..
    can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
    Thanks in advance
    Regards
    Mohamed.

    Welcome to SDN.
    refer this link
    creating integration model
    Give ur mail id i will send the document which i have.
    With regards.
    Maya.

  • How to check the master data records in using SE16 transaction?

    Hi,
    Can you please help me to check the master data records using SE16 transaction?
    Loaded master data for Characteristic and want to check the records in the master data tables.
    Thank you for your help!
    Lakshmi

    Hi!
    Welcome to SDN.
    you have to check the master data tables.
    soo in Se16 you have to select the appropriate master data table and view the data.
    following thread explains about masterdata tables
    MasterData table?
    regards
    mohan
    Message was edited by:
            Mohan Krishna

Maybe you are looking for