How the Payload Message and Logs are stored in the B1i Database Table: BZSTDOC

I would appreciate it if someone could provide any documentation regarding B1i database further maintenance.
for example:
I want to know how the payload message and logs are stored in the table BZSTDOC, and how can we retrieve the payload message directly from the column DOCDATA.
As described in the B1iSNGuide05 3.2 LogGarbageCollection:
to avoid the overload of the B1i Database, I set the Backup Buffer to 90 days : so this means Message Logs from the last 90 days will always be available, but is there some way we can save those old messages to a disk so that I can retrieve the payload message anytime?
in addition, let’s assume the worst, the B1iSN server or the B1i database damaged, Can we just simply restore the B1i database from a latest backup DB then it can work automatically after the B1iSN server is up and running again?
BR/Jim

Dear SAP,
Two weeks passed, I still haven't received any feedback from you guys.
Could you please have a look at my question?
How is this Question going? Is it Untouched/Solving/Reassigned ?

Similar Messages

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Sharing photos from iphoto 11, why does the photo information not upload when I click with share via email?  How can I make sure the photo information and location are shared when the photo (s) are shared.

    When I go to share photos in iPhoto 11, The photos transfer to the email I'm sending but the photo information and location don't.  The older version of iPhoto did it, why not this version?  What am I missing in the process of sharing via email?, Thank You.

    When you share to email do you get the following dialogue:

  • How can I change the number displayed when I make a call/send a sms? Despite transferring my old number across to my iphone messages.and Facetime are made from the original sim number and not mine. Any ideas?

    I've transferred my old number by PAT code to my new iphone and most of the time it works fine however there are problems when replying to tests and using Facetime when the original sim muber is displayed. My frined can text me on my correct number but if I reply she receives it from the different number. Also when using Facetime the number displayed is the one the came with the iphone. Anyone know what to do to get the number id correct?

    Tell her to contact her carrier and get a new phone number.

  • Whenever I play youtube videos on my apple tv the youtube logo and menus are superimposed on the image.  Any suggestions how to see just the video?

    I am unable to figure out how to view a youtube video without the youtube logo and the menus superimposed over the image.  Any suggestions?

    Found the answer on my own; restart apple TV and menus no longer appear over videos and while playing music.  However, viewing streaming video on airplay is not ideal.  Sometimes the image freezes on the TV while it continues on my macbook.  Also, sometimes the sound comes from the tv speakers; other times it comes only from the computer.  Never know what will happen when I watch a streaming video. 

  • I updated FCPX to 10.9 after I had updated my os to 10.9.1. And the result is that FCPx can no longer read LaCie external hard drive where all the projects and events are stored. The program simply crashes every time I try to read anything from the LaCie.

    Could anyone tell me what to do to solve the problem. I updated FCPX to 10.9 and the program keeps on crash every time I try to read files stored in my LaCie hard drive. And the program also keeps on crash every time I try to import files from my SDXC cards.

    I have solved the problem. Once the update is done, you need to launch FCPX, and go to File, then "update all events and projects". It will solve the problem and everything works fine.

  • When i purchase movies and they are held in the cloud and i want to download them to my computer it gives me an error message

    Whenever i purchase movies and they are stored in the cloud and i want to download them to my computer it gives me a connection issue, error 43. i have not had this problem in the past and the only recent change is my internet provider.

    First step: update Photoshop to 7.0.1.
    Second step:  provide sensible information:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • After I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes

    after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes

    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • IPhone 5 stuck on home screen and there are codes at the top??

    So I plugged the phone in and it started charging like it should. When it had enough juice the Apple logo flashed and it should'be pushed me to the main screen of my iPhone. Instead it stayed on the start up screen with the apple logo and there are codes at the top of the screen that start with [nand]. There are about 10 rows of it. What should I do?

    This error is hardware related and you should get the phone serviced by visiting an Apple Store or an Authorized Apple Service Provider.
    iPhone - Contact Support - Apple Support

  • TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

  • When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message.  How can I change the mail settings so that every reply is listed

    When I receive and answer e-mail, the correspondence is usually "nested" "behind"  the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox.  How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message.  I'm afraid I might accidentially overlook messages the way they are handled now.

    Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread".  I think that will make each message show individually.

  • How to explain.  OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external.  All can be viewed in itunes, but none on the external will sync to my iPad.  What's up with that.

    How to explain.  OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external.  All can be marked or unmarked in itunes, but none of the photos stored on the external drive will sync to my iPad.  Anybody know what's up with that?

    What really cheeses me off here is that Apple isn't allowing users enough customization.  With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options.  If Apple keeps this up, they're going to start losing customers fast.  I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
    What I don't understand about how they won't let users delete the list of available podcasts now is why?  How is this making it a better program?  I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was).  But to not give users the option to delete that list?  It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating.  I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature.  It smacks of rank incompetence.
    What improvement were they trying to make here anyway?  There was nothing wrong to my mind about how podcasts were managed in previous versions.  Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
    And reverting to a previous version is no solution.  I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

  • After the latest update my phone shows I have a new TXT Message and there are NO TXT messages. How do I fix this?

    After the latest update my phone shows I have a new TXT Message and there are NO TXT messages. How do I fix this? I have tried clearing the cache, I have tried the factory reset, I have no 3rd party messaging apps and have done noting different with my phone that I have been doing the last 6 months.

        Hi Johnnybdamned!
    I regret to learn of any issues after the software update. Let's check some things out on your phone! Does the text message say who it came from? Is it a contact you message on a regular basis? Are you using the messaging application that came with the device, or a 3rd party application?
    I recommend deleting any unneeded messaging threads and then powering the device off/on. Keep me posted!
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • What values are stored in the alignment region of an image and how can they be set?

    I am calling a number of C++ functions with different variable sized LabView images at rates in excess of 20 images per second. I need to tell the C++ code developer what values to expect in the alignment region of the image. Right now I am creating an image with a zero border that is 32 byte aligned, so there is no alignment region and everything works fine.
    I would like to move to using normal LabView images, as it saves sereval steps and allows me to use a combination of LabView and C++ operations. I do not want to re-write all the C++ functions to be aware of the LabView alignment and border areas. I just want the alignment area and border area to be zero and process them like they were part of the image.
    I can set the border region to zero using Fill Image but I am not clear as to what the values will be in the alignment region, or if I can set them. Does Fill Image also fill the alignment region? Since the C++ code is being developed on a system without LabView, and I do not have the means to debug it on my LabView system, it is tricky to know what is in this region.
    In the ideal world, I would like it to be zero or to be able to set it to zero.
    Thanks in advance.
    Andrew

    Hi Andrew,
    The function IMAQ Fill Image allows you to set the border and all or part of your image to a certain pixel value that you define. One of the inputs to Fill Image is "Image Mask" which you can use to specify which pixels in your original image will be modified. This help document describes the Fill Image VI in detail and can provide some good information for you.
    Essentially, the locations of any non-zero pixels in your Image Mask are where the new pixel value will be set in your original Image. Does that make sense? So if you know where your alignment region is then you can use an image mask with Fill Image to set the alignment region and the border to zero. If you don't use an Image Mask, the Fill Image VI will assign the new pixel value to the entire original image. 
    Regards,
    Daniel H.
    Customer Education Product Support Engineer
    National Instruments
    Certified LabVIEW Developer

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

Maybe you are looking for