How the segment E1EDP19 is getting populated in an IDOC

Hi All,
We have an outbound IDOC with IDOC type INVOIC01 and message type as INVOIC.
In this IDOC there is one segment called E1EDP19 ( with two fields QUALF and IDTNR ) which is populated with some value .
I need to find from which table this value is coming from?
Can you please guide through?
Thanks in advance,
Regards
Sanjeet

It is not restricted to a single table as far as I know. But, by seeing the dataelement's description for the field QUALF, it is given as IDOC object identification such as material no.,customer.
So..It can be from MARA,KNA1,MARC,MAKT........
Similary the same rules applies for IDTNR.
Hope this is helpful

Similar Messages

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

How the heck do i get more ring tones on my phone i purchase them and they go into my music but not ring tones any one no how i can put more on my ringtones plz n ty

how the heck do i get more ring tones on my phone i purchase them and they go into my music but not ring tones any one no how i can put more on my ringtones plz n ty

Make sure your own music files are saved in the proper folder (Digital sounds) whether in your memory card or the phone memory, the location should still be:
Sound Clips > Digital Sounds.
If your songs/mp3s are saved anywhere else, it will not show up as a selectable ringing tone.
You can move your songs through File Manager on your phone if they are in the wrong location (Options > Move to folder).
Hope that clarifies it for you.
"Try not. Do or do not, there is no try."
If you found someone's comments helpful or like what that person has to say, please give some Kudos to the post!

HT1338 i need to install OS X 10.6.8 or newer.. I have 10.5.8, how the heck do I get 10.6.8 on my macbook pro

i need to install OS X 10.6.8 or newer.. I have 10.5.8, how the heck do I get 10.6.8 on my macbook pro

Buy the install DVD for Snow Leopard from Apple
Allan

How the HE** do I get a key back on the keyboard?

On my brand new MacBook Pro a key just popped off. My last Mac laptop had like 7 keys missing. Now I am irked. How the heck do you get this thing back on?? Remember the good ole days when you just shoved it in there. What are all these little white platic things?
Ahhhhh!
Thanks.

Don't mean to threadjack here, my friend, but:
On my MacBook, my son popped off my control key. Do I need to make an appointment to have it replaced, or will they do it without one?
Will I need to send my computer in? I need to know, so I can back it up just incase...what is the liklihood they will do this? My keyboard itself is not damaged. Just the key.
-benny

How the f__k do you get my apple tv box to be in english?

How the F__k do you get my apple tv box to be in english?

Here's an excerpt from the ipod 5th gen. manual:
(Note that you won't see the names they give here in brackets, because they'll be in the wrong language. They give you the place where each of the functions are, to get you to the change the language function.)
" If you accidentally set iPod nano to use a language you don’t understand
You can reset the language:
Press and hold Menu until the main menu appears.
Use the Click Wheel to find the menu item that causes the iPod nano device name to
appear in the preview panel, and then choose it. That’s the Settings menu.
Choose the last menu item (Reset Settings).
Choose the first item (Reset) and select a language. "

Any idea how the java application can get the physical memory?

Hello, everyone
Any idea how the java application can get the physical memory?
thanks in advance

I believe what yo intend to do is forbidden, but here
my answer.
when you start your application you can give your VM
the entire memory of your pc. like this this memory
is completly under your control.* headdesk *

How is the value for ETL_PROC_WID getting populated in W_ETL_LOAD_DATES

Hello,
Can you please let me know how the ETL_PROC_WID variable works in ODI with regard to the W_ETL_LOAD_DATES. I see my W_ETL_LOAD_DATES_LOG is having 0/1 everytime. Can someone please help me to understand how this 0/1 is populated. Also, if I want the value in the variable to be always 1 what needs to done.
Thanks and regards !!

From the BIAPPS documentation: ETL_PROC_WID This column is the unique identifier for the specific ETL process used to create or update this data.
Given this description the value should be unique for every execution of an ODI integration process. If you want to see the logic behind the variable, either navigate to the ODI Console or ODI Studio connect to the BIApps ODI repository and take a look at the variable setup.

How the "Java System Properties" are populated in "About this Page"

Hi Gurus,
We are facing a very intriguing issue and want to find out the way self service pages shows information in tab "Java System Properties" on clicking "About This Page" link ( bottom left corner of any EBSO selef service page)
Thanks,
Ajay

Hi Peddi,
Thanks but let me give some more details on our problem.
It is a EBSO environment.
On Private MT we do not have any proxies set in context file or any other configuration files.
<proxyhost oa_var="s_proxyhost"> </proxyhost>
<proxyport oa_var="s_proxyport"> </proxyport>
The standard all standard OAF pages ( no customization or personalization ) show via link I mentioned before show these variables set
http.proxyHost
http.proxyPort
http.proxySet
Any idea how these get populated ?
Are these values fetched dynamically via some DB table?
Thanks,
Ajay

How the heck do i get videos on my ipod???

I know it sounds like a dumb question...but how do i download them to the hardrive and then get them on the ipod?
Thanks in advance,
Jen

You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

How the BEE lines column names populated in OTL?

Hi,
I am trying to figure out how the elementry entry lines column names( in the pay_batch_lines table they are from value_1 to Value_15) populated in the form dynamically. I checked the pay_input_values_f table and it seems the element entry form is showing the columns for the vlaues in the name column for a particular element_type_id. So can we say the element entry lines shows the column which are in pay_input_values_f table and stores data ascending order of display sequence in pay_input_values_f table.
Thanks and Regards.

Extracted from the ProC manual from Oracle 7.3 (don't ask :-{).
Chapter 11: Using Dynamic SQL
Section: Using Method 4
What Is a SQLDA?
A SQLDA is a hostprogram data structure that holds descriptions of
selectlist items or input host variables.
SQLDA variables are not defined in the Declare Section.
The select SQLDA contains the following information about a query
select list:
maximum number of columns that can be DESCRIBEd
actual number of columns found by DESCRIBE
addresses of buffers to store column values
lengths of column values
datatypes of column values
addresses of indicatorvariable values
addresses of buffers to store column names
sizes of buffers to store column names
current lengths of column names
NOTICE THE LAST THREE ENTRIES!
Could this also be usefull?
Enjoy.

How the last net price gets updated in PO?

Hi All,
Wanted to know how the last price gets updated in the PO? So whenever one creates a PO after that for the same material, the system by itself suggest the previous PO price which was created for this material.
But its not happening this time? Can anyone tell me the reason for that?
Thanks,
Swati.

Dear Swathi ji,
Price will updated in PO two ways.
one way in through Info record and other way in contract
if you want update your price after creation PO do it one simple way see item details tab ->material data in that info update tab available.if you check this your po price automatically updated.
but one main reson is allways po price will pick first in contract then info record
hope this will helps you
Prem

How Elimination and Proportion member gets populated?

Hello Experts,
I have a doubt regarding [Elimination] and [Proportion] member of value dimension. I know these members are automatically populated, but from where exactly these members pick up the value?
When we enter IC data then [Elimination] value gets populated after consolidation?
When we enter ownership data then [proportion] value gets populated after consolidation?
Thanks,
Neha

The metadata settings of IsICP and Plug Account in the Account Dimension drive the eliminations process. If these are set on a particular account then the system automatically knows it needs to generate an elimination amount in the value dimension member called <elimination>. Elimination values can be found in the <elimination> value member of the base entity and in the first common parent. The IC accounts will be forced to a zero value at the total consolidation point (topside) and the plug account should show any out of balances or net differences. You should be able to run an IC matching report that ties to the net differences amount. Feel free to email me at [email protected] if you need more help. :)

Segment fields do not get populated from second IDoc onwards.

This is a xml file to idoc mapping scenario.
Source XML Structure.
<MT_message type> ( Occurs 1 )
     <session header> ( Occurs 1)
<session header/>
      < Header >   ( Occurs 1 to unbounded )
            < Document Header > ( Occurs 1 )
                  Currency
                  <Line Item> (occurs 1 ....unbounded)
                  <Line Item/>
                  <Line Item> (occurs 1 ....unbounded)
                   <Line Item/>
            < Document Header/>
      < Header/>
      < Header >   ( Occurs 1 to unbounded)
            < Document Header > ( Occurs 1 )
                  Currency
                  <Line Item> (occurs 1 ....unbounded)
                  <Line Item/>
                  <Line Item> (occurs 1 ....unbounded)
                   <Line Item/>
            < Document Header/>
      < Header/ >
< MT_messagetype/>
Each Header tag creates an IDoc of the basic type acc_documnet01.
This IDoc has a segment E1BPACCR09 which is repeated for every ocurrence of line item in the header.
Lineitems -
> E1BPACCR09.
The currency field in this segment comes from the currency field in the documnet header tag of the source xml structure.All other fields are mapped from Line items tag of XML source structure.
When i test the mapping,with the exact source structure as above,
2 IDocs are output, (for two header tags)
First IDoc -: For two line items in XML source , 2 E1BPACCR09 are created in IDoc and the currncey field is mapped correctly.
Second IDoc-: For two line items in XML source, 2 E1BPACCR09 are created in IDoc but the currncey field is not mapped at all neither does the currency fieldname appear with null value in the output IDoc.
Can someone help me with this issue?
Himani
Edited by: Himani Pandey on Jul 10, 2008 5:10 PM

Hey
You need to use copyValue standard function,to repeat the source side to occur as many times as receiver side.else it will populate only the first occurence not after that
Thanx
Aamir

HOW THE HAECK DO I GET MY GAME ON MY IPOD?????!!

for some reason when i hook up my ipod nano my game(vortex) will not transfer to my ipod can someone tell me how to fix that and get it on there?!
dell 400 Windows XP ipod nano

Nano does not support games.

How the segment E1EDP19 is getting populated in an IDOC

Similar Messages

Maybe you are looking for