How the SPARC ANSI 3-level architecture help to achieve data independence?

Hi guys,
Anybody know how the SPARC ANSI 3-level architecture help to achieve data independence?
Regard
Ken

Is this an Oracle-related question? I'm not sure I see the connection...
Justin

Similar Messages

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

How the packaging material is treated in PGI

Guru ,
i have done PGI for a material with a packaging material which consistutes a handling unit .
ie handling unit= materaial + packaging material .
when i did PGI , maetrial is shown in the storage location as reduced qty . fine .
where is the packaging material along the material gone . NO trace of it .in mmbe no qty available
how the packaging material is treated
please help , my question is genuine .
manu

in mmbe , the packaging material qty is zero. but even though i can do pack it and create a HU . and also done PGI.ow the material is reduced its quantity . but no track of packaging material.
how the HU related packaging material works . i have limited knowledge on HU .
please help me to undersytand . in sap library also not much explanation abt it .
please help

How can I have the pricing conditions at the item and header level of the d

How can I have the pricing conditions at the item and header level of the delivery? There exist "condition" tabs both the header and the item level of the delivery but the contents of the tabs are empty. I'll be happy if you can help me. Thanks in advance....

Hi
If you want to have the pricing procedure at delivery level then you need to assign a pricing procedure at delivery level also
Just go through the path to maintain the pricing procedure at delivery level.
IMG -> Logistics execution -> Shipping -> Basic Shipping Functions -> Pricing -> Pricing Procedure. for Delivery.
But can you be more clear if the above one is not your query ?
Regards
Srinath

How to improve the performance in AM level

Hi,
I am using Jdeveloper 11.1.1.2.0 and weblogic server 10.3.2.
How to improve the performance in AM level.
Actually i have approx 10 lacs Data but when search the record then it is taking more time.
I have following the link..
http://www.gebs.ro/blog/oracle/adf-view-object-performance-tuning-analysis/
but there is no effect in the performance level for seaching.
So please help me ..
Thanks
Anup

Hi Timo,
In search page,i m giving empId and click on search button then to execute query it is taking more time.I have override the VOImpl executeQuery(). then it is taking more time
@Override
public void executeQuery() {
setNamedWhereClauseParam("bind_draft", "D");
setNamedWhereClauseParam("bind_complete","%");
setNamedWhereClauseParam("bind_reject","%");
setNamedWhereClauseParam("bind_approve","A");
setNamedWhereClauseParam("bind_review","R");
super.executeQuery();
this method super.executeQuery() is calling and after 5 minutes heap space is comming on cosole as well as page also.
Thanks
Anup

ASCP: How do I get the list of 1st level planned orders using msc_full_pegging table

How do I get the list of 1st level planned orders using msc_full_pegging table, is any one having the script.

Do you mean supply_type? If so, yes it will be in pegging table as supply_type or otherwise you can join this table with msc_supplies by joining transaction_id column and get the order_type from that which will be the supply type.
Thanks,
Abhishek Sharma
P.S:- Try opening the discussion in a separate window and see if you get the option to mark it correct or helpful,

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen. Can you please help me.

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
Can anyone please help me with this so I know how many music files or video files I have in my collection.

Have a look here...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

I have a macbook air bought in 2010 wit liquid damage that might has affected the SSD card. I need to get my data but apple won't help. Authorized dealers never seem to have the same model to try whether the SSD card works. How can I get my data quickly?

Hi
I have a macbook air bought in 2010. It has liquid damage that might or might not affected the SSD card. I need the data on my SSD card for work and I need it urgently. Apparently Apple won't get the data out, even if I have apple care... Licensed apple dealers need to have the same macbook air model so they can insert the SSD card and check whether the data is there, and they never seem to have one...
I'm really disappointed with apple. It's been two weeks and I haven't been able to find out whether the SSD card is holding my data. It can't take that long to do it in store... How can they sell a product and then wash their hands on the matter?
Anyway, enough with the apple rant. I need to get this data urgently so I need to find out how I can get it out of the card. The SSD card and data might be fine so I don't want to take it to a data recovery centre and get charged loads.
Thanks for your help.
Olatz

See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
http://web.me.com/jacobcroft/4870Flash/4870Flash.html
However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
Link to recovering a bricked card:
http://forums.techpowerup.com/showthread.php?t=64328

Someone please help me! I live in Turkey and bought my iMac desktop in February. The dealer kept the recovery discs and won't send them. My screen freezes seconds after opening and I can't figure out how to repair it myself. Please help!

I was deleting photos when the screen froze and I had to shut down the computer manually. Now after the first minute of being turned on the screen freezes and the mouse arrow goes into that rainbow whirling disc and won't stop no matter how long I let it go. My keyboard is Turkish. My keys are not marked the same as an English one is, further complicating resolving the problem.
The dealer I bought it from doesn't speak English and wants to charge me for repairs. I refuse to pack the computer up and ship it UPS out of town for a repair I can do plus pay for shipping.
When I received my computer I was only given the manual and no system restore discs for situations such as this. I asked where they were and was told there were none.
I suspect this is a tactic to make money on bogus tech repairs off their customers. To purchase new discs, if I can find them, can cost from $30-$40 - the dealer more than likely is re-selling the discs at 100% profit. This is Cizgili Apple Store in Adana, Turkey. I wish to report them. It is a national company too. I don't have a receipt handy, but have an emailed receipt. I can't get my computer's number to get further assistance on the Apple website withput it.
I was a dedicated Windows customer until I started doing desk top publishing. I'm fighting the urge not to regret buying this computer.

1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts- 18 movies need to go-.

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts… 18 plus movies need to go…. Thank you.

Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

I have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

The iphone will mirror the selected content of your computer.
Make sure everything is on your computer. Select what you want on your iphone, sync

How do I tell the installer to put my html help files in the helpdir symbolic location?

I used the File>>Print function to create an HTML help file for my application and specified in the VI Properties for the app to use <helpdir>:\ApplicationHelp.HTML as the Help Path. This should pop up the help file when a user selects "Help for This VI" from my custom menu. It works from my development directory because I installed the help files into the help directory manually, but I can't figure out how the get the installer to put the files in the correct location on the target system. I tried putting them in [LabVIEW 2010 Help] in the Destination View for the Source Files category, but that didn't work. Anyone know the right way to do this?

kgarrett88 wrote:
Hey MrSmith,
In LabVIEW 2010 SP1, if open the Project and right click My Computer, you can add the help file as a source. After you have added this file, you can then create an installer. Under the Destination header, you can add your desired destination path. After you have done that, you can go to the Source Files header and add the help file to that destination you created.
Hope this helps. Good luck with your application!
~kgarrett
Thank you for the reply! I had already done the steps you suggested, so let me put up some screen shots that should help you understand my issue better. First, I specified the path to the help information on the Documentation screen of the applications Properties:
Next I had added all the help files (DetectorFT.html and all the .png files) to the source in a virtual folder I named Resources.
Next, for the release build I specified the files to be Always Included on the Source Files header.
Next I created a Resource Directory as a destination for the release build.
Then I specified the Resource directory as the destination for the files for the Release build.
After creating the Release build, I created an Installer build and told it on the SOurce Files screen to put the help files into the [LabVIEW 2010 Help] directory.
I had assumed that putting the files in the [LabVIEW 2010 Help] destination would put them into the correct directory when the installer ran. When I ran the installer on the target system, the ran the application I tried to select the "Help for This VI" tab on the menu, but it was grayed out indicating it could not find the file in the proper location. So the question I have is, what IS the proper location for the files to be installed to so the the application will find the Help files when it is looking for them at the <helpdir> Symbolic Path location? Thanks again!
Jim Smith

I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

How the SPARC ANSI 3-level architecture help to achieve data independence?

Similar Messages

Maybe you are looking for