How the storage unit get populated automatically in TO during GR?

Hi,
I have a question to ask you with regards to SU in WM.
I perform a goods receipt against a production order in MIGO.
and I notice the Transfer Requirement get created and the Transfer Order also get created automatically in the background.
My question is the system also automatically assign a storage unit in the transfer order (LTAP-NLENR), may I know what system configuration is requre to setup such automatic SU created for the TO, where in SPRO?
In between this is a "Bulk Storage" Strategy used in this storage type.
thanks
tuff

If your destination storage type is SU managed and you have an internal number range assigned then system will automatically propose the the SU number (trhe next number from the number range)

Similar Messages

How much storage units can be added in the single bin.

Hi all,
Can anybody tell me how much storage units can be added in the single bin.
Dev

Hi Dev,
AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
In bulk storage, you need to define for each block (or row) how many
storage units fit into the block. For this purpose, you must define
both the number of columns as well as the maximum stack height. *The*
product of these factors usually gives the maximum number of storage
+units and is determined automatically by the system. However, it is+
possible to change the maximum number of storage units to a lower number
if the storage bin or the material features require this.
Hope it helps.
Thanks & Regards,

In my iPhone 4 the mute is getting on automatically dont know how to release the mute

In my iPhone 4 the mute is getting on automatically dont know how to release the mute

Have the same problem with every phone call since going to IOS7 - think my face is touching the mute on the screen but I am unaware that it has happened and keep talking until I realise the other side has hung up as they can't hear me - extremely frustrating. Then when the other side calls back, I don't hear the call as it is muted!! Is there a fix for this or a way to move the mute button??

How does example field get populated in the results (pmd.xml) file ?

How does the <example> element in the rulepack file, get populated in the pmd.xml file ?

Hi,
The example field does not get populated and won't be for two reasons:
- The Xpmd products don't do it and we want to keep the same XML schema than the others so that FlexPMD reports remain compatible with third party tools (like the PMD Hudson plugin, and XSL script)
- That would have a high impact on the report size. Imagine that you have 2000+ violations in your report...
That being said, it will be possible to retrieve the example section from the Flash Builder plugin in the outline view.
Best regards,
Xavier

How is VBDKR - ZTERM_TX1 gets populated ? Payment terms ...

Hi,
How does VBDKR-ZTERM_TX1 VBDKR-ZTERM_TX2 and VBDKR-ZTERM_TX3 get populated? Currently I see that in the INVOIC IDOC the payment term is populated from VBDKR-ZTERM_TX1 which is not based on payment terms. , I am getting the value 'Payable immediately without deduction'. I was wondering how did this value get populated which is different from the text maintained for paylemt term in table T052 table.
IDOC segment : E1EDK18-ZTERM_TXT
I see that the payment terms in the master table are carried onto Sales order and then to billing document which match the T052 value of the payment term but the IDOC is pulling some other value from some where.
Regards
Praneeth
Edited by: gansprasan on Oct 26, 2011 12:36 PM

Hi All,
All the information provided helped me in determining the logic from where this additional text is extracted.
Actually the new text is a more descriptive text of the same payment terms we see on the SD documents with additional information like percentage, base line date to give more information to the end customer as the info on the payment term in SD document is very brief.
SD_PRINT_TERMS_OF_PAYMENT Function module has the text embedded within the text elements and is pulling this text based on some additional logic inside the FM program.
Regards
Praneeth

Business area is getting populated automatically

Hi, I came across a situation where some time Business area is getting populated automatically in some of the Maintenance order. I have checked the reference object, cost centre, Plant level, WBS element etc, we have not maintained the business area anywhere. Moreover, if I create the new order with reference to order having Business area, then also business area does not come into new order, but somehow in some situation it is getting populated. I want to delete this business area from the order as it is creating problem while posting of FI docs. We get the error saying reconcilation account not found for this .
Could you please tell me, what are the other sources of business area , from there it can come. .
Thanks in advance.
Sanjay

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

USER_TAB_MODIFICATIONS not getting populated automatically

Hi All,
I am in the process of setting up gathering of schema statistics on my database and was trying to setup estimate stale statistics based on the data from the USER_TAB_MODIFICATONS table. Although I see that monitoring has been turned ON for all the tables in the DB and DML operations are also being carried out on a daily basis, the USER_TAB_MODIFICATIONS remains empty all the time.
I tried executing DBMS_STATS.FLUSH_DB_MONITORING_INFO so as to get this table populated. As soon as i executed it, i could see that the records for all the transactions carried out on that schema during the day appeared in the USER_TAB_MODIFICATIONS table. However, when i again carried out a DML operation as waited for 3 hrs so that it would get populated automatically in the table, I could not see any rows for that table in user_tab_modifications.
Can anyone help me out with what could possibly be the reason behind it? Maybe some background process that populated the user_tab_modifications every 3 hours is disabled? Or is there any other reason behind it?
Please advice.

CrazyAnie,
Here is an illustration for you;
SQL> set line 1000
SQL> set pagesize 1000
SQL> drop table ogan_deneme purge;
drop table ogan_deneme purge
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> create table ogan_deneme (deneme varchar2(10)) monitoring;
Table created.
SQL> insert into ogan_deneme values ('ogan');
1 row created.
SQL> /
1 row created.
SQL> /
1 row created.
SQL> delete ogan_deneme;
3 rows deleted.
SQL> commit;
Commit complete.
SQL> select * from user_tab_modifications;
no rows selected
SQL> exec dbms_stats.gather_table_stats('ogan','ogan_deneme');
PL/SQL procedure successfully completed.
SQL> select * from user_tab_modifications;
no rows selected
SQL> conn / as sysdba
Connected.
SQL> select * from dba_tab_modifications where table_owner = 'ogan';
no rows selected
SQL> select * from dba_tab_modifications where table_owner = 'OGAN';
no rows selected
SQL> conn ogan/password
Connected.
SQL> exec dbms_stats.gather_table_stats('ogan','ogan_deneme');
PL/SQL procedure successfully completed.
SQL> insert into ogan_deneme values('ogan');
1 row created.
SQL> /
1 row created.
SQL> /
1 row created.
SQL> delete from ogan_deneme;
3 rows deleted.
SQL> commit;
Commit complete.
SQL> select * from user_tab_modifications;
no rows selected
SQL> exec dbms_stats.FLUSH_DATABASE_MONITORING_INFO;
BEGIN dbms_stats.FLUSH_DATABASE_MONITORING_INFO; END;
ERROR at line 1:
ORA-20000: Insufficient privileges
ORA-06512: at "SYS.DBMS_STATS", line 2151
ORA-06512: at "SYS.DBMS_STATS", line 14390
ORA-06512: at line 1
SQL> conn / as sysdba
Connected.
SQL> exec dbms_stats.FLUSH_DATABASE_MONITORING_INFO;
PL/SQL procedure successfully completed.
SQL> conn ogan/password
Connected.
SQL> select * from user_tab_modifications;
TABLE_NAME PARTITION_NAME SUBPARTITION_NAME INSERTS UPDATES DELETES TIMESTAMP TRU DROP_SEGMENTS
OGAN_DENEME 3 0 3 25-JUN-10 NO 0
SQL>
Even you have executed dbms_stats.FLUSH_DATABASE_MONITORING_INFO; and so still do not see any data, gather table stats for the relevant table.
Hope it helps,
Ogan

Default the storage unit type

Hi Experts,
Is it possible default the storage unit type in LT04 ?
if yes, kindly advise how to configure in SPRO?
Thanks.
Regards,
Steven

Hi
Not sure if you use HU and packing material. You can try through this config
IMG-Logistics General - Handling Unit management - Basics - Warehouse Management - Assign Storage Unit type to Packing Material Type.
For every packing material you can maintain a default storage unit type
Regards
Jayaram

How suggested buyer id gets populated in requisition lines

How suggested buyer id gets populated in requisition lines when we select the external catalog? Where we need to do the setup? Please suggest.

Sorry, I have misguided you a little.
You can do that using POR_CUSTOM_PKG client extension provided by Oracle for iProcurement.
Assign the suggested buyer value in the line defaults function.
Thanks,
PS.

Save password? how the **** can I get rod of this function!!! every time I sign to a place if I wanted to safe a bloody password I would do that!!!

save password? how the **** can I get rod of this function!!! every time I sign to a place if I wanted to safe a bloody password I would do that!!!

It is the same in the latest version 7.0.2. You can shut off the saving and auto filling of passwords by clicking in the menu bar at the top Safari > Preferences and then select Autofill and uncheck the passwords box. Also check the next pane as well.

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

How many minimum tables get Populated once Employee Created in People scree

Hi
how many minimum tables get Populated once Employee Created in People screen ?
thanx

per_all_people_f
per_periods_of_service
per_person_type_usages_f
per_all_assignments_f (as a primary assignment is mandatory for employee)

How the consumption valuse gets updated in the table MVER

Hi,
Can anyone explain me how the consumption value gets updated in the table?
Would you please be able to confirm that all movement types are considered for updates in table MVER. If not, i would need the movement types that are considered as pertaining to u2018consumptionu2019.
Thanks
Srini

Hi,
Consumption both in material master view and table MVER are updated as soon as the movement is made, ie, real time data.
To see the movements relevant to consumption, use OMJJ to review movement types or table T156. In this table, select Consumpt.postg. field not equal to blank (so blank is excluded).
This should then show all movement types subject to consumption posting. The likely ones to see are below, with majority being G.
(blank)     No consumption update
G     Planned withdrawal (total consumption)
R     Planned, if ref. to reservation, otherwise unplanned
U     Unplanned withdrawal (unplanned consumption)
Thanks.

IIf I create a partition for Bootcamp that is at least 30 GB in size, is that all the storage I get when running Windows?

If I create a partition for Bootcamp that is at least 30 GB in size, is that all the storage I get when running Windows?

There are differences between each Mac and what the original configuration of the Mac is/was. If your Mac originally came with an Optical drive, burning the ISO to a DVD and using it will work. Hardware modifications like Optibay will cause problems. Modifying Bootcamp info.plist will cause problems. Disk Utility partitioning will cause problems. A custom Hybrid MBR will cause problems. External Optical drives are unlikely to work. There is long litany of grief.

HT201301 ok so my comics are in itunes (bought comic viewer). How the **** do I get them into my iPad?

ok so my comics are in itunes (bought comic viewer). How the **** do I get them into my iPad? The info in About File Sharing only covers getting them into iTunes. How does the app import them ot iTunes sync them? Getting tired of going in circles.
Thanks to anyone who can help here
wkou

Try contacting the developer > http://www.denvog.com/contact.html
http://gizmodo.com/5555651/comic-viewer-for-ipad-lets-you-surf-for-comics-in+app
iTunes Store: About In-App Purchases
iTunes Store: Purchasing and managing auto-renewing subscriptions

How the storage unit get populated automatically in TO during GR?

Similar Messages

Maybe you are looking for