How this user exit MWMRF102 triggered in tcode LM05

how this user exit MWMRF102 triggered in tcode LM05. could somebody help for this procedure
thanks in advance
rakesh

Hi Sairam,
Goto the program for transaction VL10G.In that u make a seach for the user-exit
USEREXIT_PREPARE_LAYOUT_FILL.Then write the logic inside tht.U will need an access key for that.
<b>Reward points if it solves ur query or answer is helpful</b>
Thanks
Chinmay

Similar Messages

Please help me with user-exits or baids for TCode : FOE2 & FOE1

Hi Experts
Please help me with user-exits or baids for TCode : FOE2 & FOE1.
I found these but not picking values from VIMI01,VIOB03 and VIOB41.
User-exits
FVCH0001                                CH-specific enhancements: Esp. POR
ISRE0001                                Determine bank procedure account no.
ISRE0002                                IPD reporting data retrieval
Business Add-in
FVD_HANDLE_FORMULA                      Processing of Condition Formulas

Hi,
ASk your basis regarding the CI_CSKB table active issue, and first of all i dont see any table with the name CI_CSKB.
And check this exit-COOMKS03 whether it works for your screen exits.
Cheers!!
VEnk@
Edited by: Venkat Reddy on Nov 4, 2008 5:59 PM

Which user exit is triggered on Save of CV01N/CV02N

I have some requirement to be triggered on the Save of a document using CV01N/CV02N.
I found three exits in the transaction EXIT_SAPLCV110_001, EXIT_SAPLCV110_002, EXIT_SAPLCV110_003 but none of them get triggered on Save even though I have activated the enhancement.
If someone knows which user exit gets triggered on Save of CV01N/CV02N please let me know.

You can use BADIs.
You can use DOCUMENT_MAIN01.
Go to SE18. Display 'DOCUMENT_MAIN01.
On the menu bar, Click on Implementation > Create.
Give your own implementation name starting with Y or Z.
There's a method called BEFORE_SAVE in this.
It has all the data DRAW, DRAD, DRAZ etc as Changing Parameters.
So you will be able to manipulate that data in that method.
Activate the implementation And you are good to go.
Reward if helpful.

User exit for BADI for Tcode: IW31

Hi
Can any one tell me User-exit or BADI for Tcode: IW31.
Whenever an Order is released (IW31) or saved then automatically Purchase Requisition will be created by standard program. My requirement is like at the same time , we need to create Purchase order automatically based on Requisition created above within the transaction IW31.
Thanks in advance.
Sowjanya.

Try this
BADI : IWO1_ORDER_BADI
IWO1_PREQ_BADI
IWO1_SCREEN_MODIFY
User Exit : IWO10012 (SMOD)

User Exit that triggers for Change operation

Hi All..
I want a user exit which triggers when I enter into an infotype(2001) from tcode PA30.
My actual requirement is to show the field REFNR in display mode.
By using the exit PBAS0001 exit0001 I can make the field REFNR in displaymode for create operation.
But in change operation of the infotype the exit is not getting triggered.
Regards,
Anji.

chk these
Transaction Code - PA30                     Maintain HR Master Data
Enhancement/ Business Add-in            Description
Enhancement
PBASRP01                                PA: User exit distributed reporting
PBAS0002                                PA: Enhancements for Personnel Administration - Menu
PBAS0001                                PA: Pers.Admin./Recruitment: Default values and checks
PARA0002                                Enhancement for Calculating Annual Salary; IT0008,14,15
PARA0001                                Enhancement for Determining the Number of Periods
HRRPAI01                                User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
HRPC0001                                HR: PC download authorization
HRPBAS01                                User Exit for HR Master Data
Business Add-in
HRPAD00_PREM                            Definition of User Exit for Collective Search Help PREM
HRPADUS_PBAS_0001                       Customer Exit for Message handling
HRPAD_SUBTY_CHECK
HR_F4_GET_SUBTYPE                       HR: Entry help for subtypes
HR_FAST_ACTION_CHECK                    Check fields on the fast entry screen
HR_INDVAL                               HR: Indirect wage type valuation
HR_SET_PKGAB
HRPAD00_RECOG_SCREEN                    Employee - Recognition Screen
HRPAYXX_DELETE_PERNR                    BAdI for Reports Deleting Personnel Numbers
HRPAD00_PAPM                            Definition of User Exit for Collective Search Help PAPM
HRPAD00_GET_AF_0008                     Additional Fields for Basic Pay Infotype (0008)
HRPAD00_ENTRY_LEAVE                     HR_ENTRY_DATE and HR_LEAVING_DATE
HRPAD00_ADRS                            HR: Address formatting
HRPAD00MGEACTIVATION                    Activation Action BAdI for Global Employees
HRPAD00INFTY                            Update / Infotype maintenance
HRPAD00AUTH_TIME                        Time Logic in the PA Authorization Check
HRPAD00AUTH_RECORD                      Spanish Data Privacy Law: Exit for Recording
HRPAD00AUTH_CHECK                       HR: Authorization Check
HRIV_REDUCE_AMOUNT                      Reduction within Indirect Valuation

User-exit for report RPCAIDP0 (tcode: PC00_M19_CAID)

Dear Gurus,
Does anyone know user-exits for report RPCAIDP0 (tcode: PC00_M19_CAID) ?
Thank you in advance,
PSC

Depends on what you want to do Priscilla, i have quite an experience with RPCAIDP0 report and it's not the easiest report to change the standard without copying to an customer report. Also, in the previous year, SAP changed the logic of the report quite a bit in order to have the same logic as in RPCIIDP0, so they created a class (CL_HR_PT_EMPLOYEE_TAX_DATA) in which they encapsulated all the data retrieval regarding payroll results, so it's not that dificult to enhance the class itself but it's a bit dificult to get the logic right away. I have done this for several clients, so if you can be more specific maybe i can help you.
Best regards.

User Exit/ Badi/ FM for Tcode IW32

Hi Experts,
I have a requirement which i need to update the next line with the same part number concatenate with u201CNVu201D and in the quantity enter u201C-1u201D and enter the item category as u201CLu201D.
The scenario is this,
In the service order (IW32) when ever a component is entered on a new line item, example below:
RESBD-MATNR= spare part(Ex: 0614-2331) compponent
System should update the next line with the same spare part number concatenate with u201CNVu201D
Ex: 0614-2331NV
and
Required quantity (RESBD-MENGE) =-1
Item Category(RESBD-POSTP) = L
Plant(RESBD-WERKS)= US40
has anyone done this before? Can you lend a hand? I just need the exit/ badi where the coding can be done.
Thanks.
Regards,
Min Dee

Hi,
try this User Exit..
Exit name    Short text
IWO10012 Maintenance order: Priority handling on central header
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Prabhudas

ESS CATS user exit not triggered

Hi,
I am making some validations on the time sheet using enhancement cats0006, but that user exit is not triggered in the portal, in ESS.
I have my project activated through tr. CMOD, the user exit is triggered in R/3 using transaction CAT2.
What could be the reason ?
Thanks,
Stefan
Edited by: Stefan Kolev on Jan 24, 2012 10:51 AM

Solved

How to find the structure in this user exit

My requirement is add new field to Delivery due list ALV report(VL10G).For enhance this report i will append one field(LIKP-SDABW) in this structure SHP_VL10_ITEM.This structure is not showing in the include LV50R_VIEWG05
USEREXIT_PREPARE_LAYOUT_FILL .Where i have to find this structure,and internal tables?
Please help me.
Thanks & Regards,
sairam

Hi Sairam,
Goto the program for transaction VL10G.In that u make a seach for the user-exit
USEREXIT_PREPARE_LAYOUT_FILL.Then write the logic inside tht.U will need an access key for that.
<b>Reward points if it solves ur query or answer is helpful</b>
Thanks
Chinmay

User-exit not triggered(variable)

Hi mates,
I have two variables A (fiscal year), B(calmonth interval) and both of type user-entry(replacement type). I defined C varible of type user-exit(replacement type). In C, i'm reading A & B values and checked whether B's interval is in A.
eg: A input is 2007 (means 04.2006 to 03.2007).
B input interval 03.2006 to 10.2006.
In C i'm checking whether B's interval is in A (fiscal year).
Based on B's value, dynamically i have to show input & output layouts. I defined one function module for C, but it's not triggering after entering input values in plng folder.
How to trigger user-exit immediately after user enter input values? (without selecting dependent input or output layout tabs, these input or output layout uses varible B interval values for dynamically showing calmonth columns).
Previously i defined few varibles like above, there user-exits triggered only after i choosing related input or output layout tabs.
thanks,
Raju

The user exit written in the variable will be triggered if that variable is used anywhere in folder or layout or function or called in the logic of any other variable. In your case, C is not used anywhere that why it is not executing this code. For the required functionality, you have to create planning function of type exit and place this code. Run this function on layout open or folder opening something like this.

User Exits or BADI for Tcode ME51N

Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
Paras

Hi Paras,
Copy this program and execute. Will get all list of existin g Exits and Badis.
very useful program
Below code will give a list of BADIs for particular transaction.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Reward points if this helps.
hema.

Notification User-Exit not triggered

Hi all,
We have configured the system to automatically create a notification when creating an order (Define Notification and Order Integration)
However, when saving the order (without accessing the notification) we find that the Notification save user-exit (QQMA0014) is not triggered.
Has anyone found a work-around for this?
Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=328408]
PeteA

Pete,
It is a common issue. The logic of not calling this exit being that it can prevent notification save and that is not desirable when created in conjunction with the order.
No specific workaround that I know. Depending on what you exit does it might be possible to duplicate the logic into one of the order exits/Badis. Alternatively into a notification exits that is called - generally at create rather than at save - QQMA0025 for example.
-Paul

User exit for invoice cockpit (tcode /cockpit/1)

Hi everybady,
Could you please hepl us on this issue.
I need to add a check when updating invoice cocpit document (via tcode /cockpit/1), i used exit FM via tcode /cockpit/C1 but nothing hapened.
Any replay will be appreciated.
Thanks.
Toubkal

Hi Alok,
Try this functional module CONVERT_TO_LOCAL_CURRENCY.
and user exit
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
regards,
Vishal

User exit to modify FI Tcode FD02 Application toolbar

HI GURU,
currently i am working on a migration project. we are migrate to ERP 6.0 from R3
after migration, one of the button that customize by previous consultant is disappaeared.
i want to know is there any way to modify FI Tcode FD02(change customer: ) Application toolbar, what i need to do is add a button that next to standard button(General Data / Company code Data)
many thx
HOWARD

Hello Howard,
I seem to have found a user exit in the transaction FD02, its : SAPMF02D. Hope this works for you.
Regards,
Manish.

User Exits / BADIs triggered during the Material document creation

Hi Experts,
Can anybody tell me the User Exits / BADIs /Possibilities that can be triggered during the Material Document Creation which can be used to update the Equipment Master User Statuses.
Thanks,
Sangeeta.

Hey Sangeeta,
Try these User Exit's
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Using Enhancement MGA00001 (Function Exit : EXIT_SAPLMGMU_001 ) you can validate & Change your Material Document Number.
Badi's
BADI_EAN_SYSTEMATIC
BADI_GTIN_VARIANT
BADI_MAT_F_SPEC_SEL
BADI_MATERIAL_CHECK
BADI_MATERIAL_OD
BADI_MATERIAL_OD
BADI_MATERIAL_REF
BADI_MATNR_CHECK_PVS
BADI_MM_MATNR
BADI_MM_MATNR
CDT_CHECK_MATERIAL
MG_MASS_NEWSEG
MG_MASS_NEWSEG
WRF_DISCONT_FACT_E
Note: This is for transaction code MM01, MM02 & MM03.
Regards,
Saravanan M

How this user exit MWMRF102 triggered in tcode LM05

Similar Messages

Maybe you are looking for