How to accelerate the activation of smartforms

Hi, I find the activation of smartforms too low, even if I make only one small change. Sometimes I need to go for a walk to kill the time.
Is it possible to accelerate this procedure?

hi
good
these things happens besicall for the below reasons-
1-the respective sap server must be slow.
2-due to some select statement that may taking lots of time to get the data from the database.
3- otherwise there would be some image file who is taking time to display in your smartform screen.
4-else there would be some other performance issue.
you plz check all those aspects.
thanks
mrutyun

Similar Messages

How to protect the lines in smartforms

hi gurus
i want to know how to protect the line in smartforms..
regards
baskar

Check this link.
http://www.saptechies.com/smartforms-protect-lines-in-main-window/
if you are using tables, there are two options for protection against line break: You can protect a line type against page break. You can protect several table lines against page break for output in the main area.
Protection against page break for line types Double-click on your table node and choose the Table tab page. Switch to the detail view by choosing the Details pushbutton. Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines Expand the main area of your table node in the navigation tree. Insert a file node for the table lines to be protected in the main area. If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file. Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page
Regards,
Maha

How to change the language in smartform?

hi
how to change the language in smartform?

Hi,
U can't change the language in the smartform, the main language of the smartform is the language used to create it (so the language used for SAP log on.
But u can translate it (by trx SE63) and if u need to print in a new language u have to indicate it when the smartform is called.
U can transfer the language to be used for the print in the parameter CONTROL_PARAMETERS, like structure SSFCTRLOP, here u can indicate the language in the field LANGU.
see this..
Use transaction SE63, after activate your smartform, to translate.
In the First Page of your Smart Forms click on Global Settings under that click Form Attributes
now in the Right side screen Go to Subscreen Language Attributes.
select the Radiobutton Translate To all Languages
from the Translate subscreen out of three radio buttons.
rewaards if useful
regards,
nazeer

How to list the active savepoints in a session?

How to list the active savepoints in a session?

SR 3-4535479801: How to list the active savepoints in a session?
Oracle Support - September 19, 2011 7:12:50 AM GMT-07:00 [ODM Answer]
=== ODM Answer ===
Hello,
That is the only way and it is also described in:
How To Find Out The Savepoint For Current Process (Doc ID 108611.1)
One thing to be aware in lower version is the dump if no savepoints are declared:
ALTER SESSION SET EVENTS 'IMMEDIATE TRACE NAME SAVEPOINTS LEVEL 1' Raises ORA-03113/ORA-07445[SIGSEGV]/[STRLEN] Errors (Doc ID 342484.1)
Best regards,
George
Oracle Support Database TEAM
Oracle Support - September 19, 2011 6:36:39 AM GMT-07:00 [ODM Question]
=== ODM Question ===
How to list the active savepoints in a session?
Is there another way than the following as referenced in the Oracle forums: Re: How to list the active savepoints in a session? ?
"alter session set events 'immediate trace name savepoints level 1';"
A trace file is generated in the user_dump_directory.
- September 17, 2011 5:12:53 PM GMT-07:00 [Customer Problem Description]
Problem Description: How to list the active savepoints in a session?
Is there another way than
"alter session set events 'immediate trace name savepoints level 1';"
A trace file is generated in the user_dump_directory.
Re: How to list the active savepoints in a session?

Hi frinds ,how to calculate the totals in smartforms

1)how to calculate the totals in smartforms .

Hi,
To calculate totals and sub totals in sap scripts you can use subroutines.
Say if you have to add the unit price (KOMVD-KBERT) then in the main window whereever tat value is picked write this routine
/: DEFINE &TOT_PRICE&
/: PERFORM F_GET_PRICE IN PROGRAM /:USING &KOMVD-KBERT& /:CHANGING &TOT_PRICE& /:ENDPERFORM
Then write the variable where ever you want it to be printed (mostly it will be in footer window)
Then create subroutine pool program and you have to write the code.
FORM F_GET_PRICE tables int_cond structure itcsy
outt_cond structure itcsy. data : value type kbert.
statics value1 type kbert.
Read int_cond table index 1.
value = int_cond-value.
value1 = value1 + value.
Read outt_cond table index 1.
outt_cond-value = value1.
Modify outt_cond index 1.
ENDFORM.
regards..

How to see the active users in the AS JAVA?

Hi Experts,
In as java how to see the active users in the system.Kindly,tell me step by step details to find the active users.As I'm new to the Netweaver administration.
Thanks,
Reddy

Hi,
You can find the login sessions with Timestamp and User in Visual Admin under SecurityProvider and tab Runtime and Login sessions. You might also get these details in NWA->Monitoring->Availability.
Regards, Rahul

How to pull the data into smartform after designing layout?

how to pull the data into smartform after designing layout?

call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
Check the below Sample code.
FORM label_print.
DATA : g_fm_name TYPE rs38l_fnam,
         g_output TYPE ssfcompop,
         g_control TYPE ssfctrlop,
         g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
         g_dest TYPE rspopname,
         g_printer TYPE rspoptype..
REFRESH : i_out[],i_qals[].
SELECT matnr maktx
         INTO TABLE i_out
         FROM makt
         FOR ALL ENTRIES IN i_mseg
         WHERE matnr = i_mseg-matnr
         AND   spras = sy-langu.
SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
         INTO TABLE i_qals
         FROM qals
         FOR ALL ENTRIES IN i_mseg
         WHERE matnr = i_mseg-matnr
         AND   charg = i_mseg-charg.
*FM to accept the device type and returns the short name of the output device
CALL FUNCTION 'EFG_GET_PRINTER'
    EXPORTING
      x_no_dialog = ' '
      x_obligatory = 'X'
    IMPORTING
      y_tddest     = g_dest
    EXCEPTIONS
      cancelled    = 1
      failed       = 2
      OTHERS       = 3.
*device type name for the output device
SELECT SINGLE patype                                  "#EC CI_NOFIELD
         FROM tsp03d
         INTO g_printer
         WHERE padest = g_dest.
*printer setting
g_control-no_dialog = 'X'.
g_output-tdarmod = '1'.
g_output-tdcopies = '001'.
g_output-tddest = g_dest.
g_output-tdprinter = g_printer.
g_output-tdnewid = 'X'.
g_output-tdimmed = 'X'.
CLEAR wa_mseg.
LOOP AT i_mseg INTO wa_mseg.
    READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
check for the status and filter the records
    CLEAR : wa_qals.
    LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
                                AND charg = wa_mseg-charg.
      CALL FUNCTION 'STATUS_TEXT_EDIT'
        EXPORTING
          objnr            = wa_qals-objnr
          spras            = sy-langu
        IMPORTING
          line             = l_status
        EXCEPTIONS
          object_not_found = 1
          OTHERS           = 2.
      IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
        DELETE i_qals.
      ENDIF.
    ENDLOOP.
    SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
    IF i_qals IS INITIAL.
      l_msg = text-002.
    ELSE.
      READ TABLE i_qals INTO wa_qals INDEX 1.
      SELECT prueflos vbewertung
             INTO TABLE i_qave
             FROM qave
             WHERE prueflos = wa_qals-prueflos
             AND   kzart = 'L'.
      IF sy-subrc <> 0.
        l_msg1 = text-003.
      ENDIF.
      SORT i_qave.
      CLEAR : wa_qave.
      IF NOT i_qave IS INITIAL.
        READ TABLE i_qave INTO wa_qave INDEX 1.
        IF wa_qave-vbewertung = 'A'.
          l_msg = text-002.
        ELSEIF wa_qave-vbewertung = 'R'.
          l_msg1 = text-003.
        ELSE.
          l_msg1 = text-003.
        ENDIF.
      ENDIF.
    ENDIF.
    CLEAR : wa_ser03.
    READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
*Calling Smartform
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = g_form
      IMPORTING
        fm_name            = g_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
*Calling FM generated from the smartform
      DATA : l_date(10) TYPE c,
             l_date1(10) TYPE c,
             l_date2(10) TYPE c,
             l_date3(10) TYPE c,
             l_hyphen(1) TYPE c VALUE '-'.
      CLEAR : l_date,l_date1,l_date2,l_date3.
      l_date1 = wa_mseg-vfdat+0(4).
      l_date2 = wa_mseg-vfdat+4(2).
      l_date3 = wa_mseg-vfdat+6(2).
      CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
      CALL FUNCTION g_fm_name
        EXPORTING
          control_parameters = g_control
          output_options     = g_output
          user_settings      = ' '
          g_matnr            = wa_mseg-matnr
          g_mat_text         = wa_out-maktx
          g_batch            = wa_mseg-charg
          g_rev              = wa_qals-revlv
          g_edate            = l_date
          g_lot              = wa_qals-prueflos
          g_qty              = wa_mseg-erfmg
          g_uom              = wa_mseg-erfme
          g_serial           = wa_objk-sernr
          g_smsg             = l_msg
          g_fmsg             = l_msg1
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      CLEAR g_output-tdnewid.
    ENDLOOP.
    IF sy-subrc <> 0.
      CLEAR : l_date,l_date1,l_date2,l_date3.
      l_date1 = wa_mseg-vfdat+0(4).
      l_date2 = wa_mseg-vfdat+4(2).
      l_date3 = wa_mseg-vfdat+6(2).
      CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
      CALL FUNCTION g_fm_name
        EXPORTING
          control_parameters = g_control
          output_options     = g_output
          user_settings      = ' '
          g_matnr            = wa_mseg-matnr
          g_mat_text         = wa_out-maktx
          g_batch            = wa_mseg-charg
          g_rev              = wa_qals-revlv
          g_edate            = l_date
          g_lot              = wa_qals-prueflos
          g_qty              = wa_mseg-erfmg
          g_uom              = wa_mseg-erfme
          g_serial           = wa_objk-sernr
          g_smsg             = l_msg
          g_fmsg             = l_msg1
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      CLEAR g_output-tdnewid.
    ENDIF.
ENDLOOP.
IF sy-subrc = 0.
    MESSAGE i000(zm).
ENDIF.
ENDFORM.                    " label_print

How to accelerate the processing time of pattern match

How to accelerate the processing time of pattern match
If my camera acquire an image in 50ms, but when we analyze this image with pattern match, we need about 300ms. Except using queue to seprate acquisition
and analysis to different loops, there is another way to directly accelerate the processing time of pattern match ? Maybe compact rio with FPGA ?
But I saw a paper in NI web, there is no this function in c-rio ?
Any suggersion will be very apperciated ~
Ricky
Attachments:
aa.png ‏65 KB

Hello,
what matching algorithm are you using? You can reduce time using the Gaussian pyramids algorithm.You can fine tune the parameters using the advanced options.
What is your template size/image resolution?
I suppose using a computer with better performance would also work...
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

How to get the active application users IP address in R12 by sql command

Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks

936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein

How to obtain the active version of a contract?

Function module BBP_PD_CTR_GETDETAIL and table CRMD_ORDERADM_H do not seem to filter the non-active contracts.
How to get the active version only.

It is at the item level. Refer to table BBP_PDIGP field ITM_RELEASED

RRB-How to get the activity description instead of WBS element in the bill

Dear All,
I am using RRB DIP profile to do my Resource related billing
RRB-How to get the activity description instead of WBS element in the billing
document.Now iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
element description for all the activities.Can some body guide me to overcome this problem.
Assured reward points for your suggestions and help.
Thanking you,
Best regards,
R.Srinivasan

Dear All,
Please can any body help me for the same.IT is urgent.I will award you points.
thankyou,
Best regards,
R.Srinivasan

How to eliminate the ACTIVE RECTANGLE? in flash 8

hi can somebody tell me how to eliminate the active rectangle
in flash movies. I am using flash 8 but i dont like the active
rectangle around the movie can somebody tell me step by step how to
do it? FLAS 8 VERSION

Please search this forum or google - it's been the most asked
and answered question everyday for
months - search for:
"Click to activate this control".
hope this helps.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
valla23 wrote:
> hi can somebody tell me how to eliminate the active
rectangle in flash movies.
> I am using flash 8 but i dont like the active rectangle
around the movie can
> somebody tell me step by step how to do it? FLAS 8
VERSION
>

How to find the active workflows in the system

Hi,
we are going for upgrade, we want to find out the active workflows in the system
please guide me, how to find the active workflows in the system
is there any standard table to find the active workflows in the system
please suggest me the step by step process to find the active workflows.
thanks,
chandra

Welcome to the Forums.
Please go through the FAQ of the Forum.
You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
Please try {forum:id=1050}.
Regards,

How to print the superscript in smartform

Hi gurus,
Please tell me the procedure how to print the superscript in middle of the text displaying?
when we are displaying the smartform its converted to some special character like & .
please let me know procedure at the earliest
Regards
Raj

Hi thanks for ur patience.
see my requirment was to print TM as superscript for HLL ,already smartstyle is there, and also a character format with superscript is also defined.
then aftet HLL how it prints as superscript.
for HLL we are using another character format and for superscript we are using the another character format.
If posiible send me the code to write in smartforms
Regards
RAj
Points are awarded for useful answers.

How to calculate the subtotals in smartform

hi all
can any body tell me how can i display teh subtotals in smartform, please tell me the steps how to do that and aslo is there any special events in smartforms that are helpfull in getting and displaying the subtotals in smartforms
thanks in advance

Hi,
For doing subtotal calculation in SMARTFORMS, do like this.
Create one "Program Lines" to your main window table row.
Already you are maintaing "Internal table" for you table in main window.
Before that, sort the particular internal table with key fields through which you want to find out the sub total, now within the program lines code, first identify how many quantity and currency fields are there.
Declare respective temporary variables for each and every quantity and currency field.
then write logic like this.
at new matnr.
v_menge = wa_out-menge + v_menge.
v_netwr = wa_out-netwr + v_netwr
end at.
Also dont forget to declare character variables for quantity and currency fields. We cannot directly display them in smartforms. we need to pass them to the respective quantity and currency fields.
After end at statement write like this,
write: / v_menge decimals 2 to v_mengetext,
v_netwr decimals 2 to v_netwrtext.
after this dont forget to clear,
clear: v_menge, v_netwr.
no populate v_mengetext and v_netwrtext in your text elements.
Regards,
Santosh Kumar M.

How to accelerate the activation of smartforms

Similar Messages

Maybe you are looking for