How to access a specific folder in my catalog which doesn't appear in my library?

Hi, I'm trying to access a folder that I've previously imported and classified in my catalog.
I don't see it in my library module (but I do see it in through my cpu's finder window).
What would be the best way to 'retrieve' them and work with them.
Thank you.

Most likely, you (accidentally) imported those photos into another folder, that's why you can't see the desired folder in Lightroom.
You can find the name of one of these photos in Finder, and then do a search for it in Lightroom, and then right-click on the photo in Lightroom and select "Go To Folder in Library". Before you do the search, click on All Photoghraphs in the Catalog Panel and turn off all Filters (Ctrl/Cmd-L once or twice)

Similar Messages

  • C7 how to access the PRIVATE folder in phone memor...

    C7-00 how to access the PRIVATE folder in phone memory?
    Meaning the folder C:\private
    With X-plore you can see the folder but it is marked as 0 kb.
    Edit: reason for this is that I had Angry Birds installed on memory C:
    Then I had changed my phones default game install memory to E: at the OVI store setup in the phone. On Monday OVI suggested that I should update the AB and so I did.
    Now it installed the new version to memory E: and all my game progress was gone.
    Just need to see if the save game still lays on C:\private\20030e51.
    Solved!
    Go to Solution.

    Ah, I'm sorry - I thought it was the private folder in C drive that I had managed to get into the previous week but it was the private folder in mass storage ...
    If you want to thank someone, just click on the blue star at the bottom of their post

  • How to access the archive folder in jive forums programiticaaly

    hi
    how to access the archive folder in jive forums programitically using weblogic 10.3
    Thanks
    Rani

    Ah, I'm sorry - I thought it was the private folder in C drive that I had managed to get into the previous week but it was the private folder in mass storage ...
    If you want to thank someone, just click on the blue star at the bottom of their post

  • How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

    Dear Expert,
    I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
    But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
    I am using portal 7.0.
    Thanks & Regards,
    Patralekha

    Hi Expert,
    I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
    But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
    But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
    INavigationService is available there.
    But didn't get any proper discussion on this interface for the same requirement.
    Can you please help me.
    Thanks & Regards,
    Patralekha

  • When I type into Spotlight the name of a folder on the desktop, it doesn't appear in Spotlight. Could you please tell me how to get it right? Thank you.

    When I type into Spotlight the name of a folder on the desktop, it doesn't appear in Spotlight. Could you please tell me how to get it right? Thank you.
    And, what do I do if one of the harddisks on my Mini (2010, SL Server) starts misbehaving?

    Which security software (firewall, anti-virus) do you have?
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps and allows to delete the Firefox program folder.

  • How to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?

    how to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?

    Use the Boot Camp Assistant in the /Applications/Utilities/ folder to put the Boot Camp drivers onto an optical disk or USB thumbdrive.
    (80603)

  • I purchased music but it doesn't appear in my library, only as purchased in the store. How do I get the songs to my library??

    I purchased music but it doesn't appear in my library, only as purchased in the store. How do I get the songs to my library so I can burn a CD??

    Welcome to Apple Support Communities
    You have to download the purchased music, because now you can only listen to purchased music from iCloud. See > http://support.apple.com/kb/ht2519

  • How to open the specific folder view with JS

    Hi,
    Maybe very simple thing, but I don´t know how to "open" the view to an excisting folder like "Macintosh HD/MyDocs/This_Folder" ?
    Thanks in advance!
    Erkki

    I found the answer myself. It was this what was missing (to choose the specific folder).
    eg.
    app.browseTo(Folder("/Macintosh HD/MyFolder/"));

  • How to scan to specific folder on Mac desktop

    I don't like any of the choices for scanning to computer because I want to scan NOT to Desktop (or Documents) but rather to specific folder on Desktop, specifically "xScanned Docs ƒ." How to I poke the buttons on the Scan interface to signal this command?

    Hey @fsnedeker,
    Welcome to the HP Support Forums!
    I would like to assist you today with altering your Scan To folder options when scanning from your HP Officejet Pro 8610 e-All-in-One Printer to your Mac OS X 10.10 computer. Can I please have you follow the steps below.
    1. Click on Apple and select System Preferences
    2. Click Print & Scan
    3. Select your printer on the left and select Options & Supplies
    4. Click the Utility tab. Select Open Printer Utility.
    5. Under the Scan Settings section select Scan to Computer
    6. Click on Edit Scan Tasks
    7. A list of Scan to Computer shortcuts will now open
    8. Select either Save as Jpeg or Save as PDF. Whichever one you would like to alter the folder for. Next, Select Edit.
    9. Under the Move Finder Items section, alter the 'To:' folder to whatever folder you actually want your scans to go to
    10. Once the  folder has been selected, click on OK to save the changes.
    Now when you scan your items they should save in the new folder location you have just configured.
    Please let me know if these steps resolve your issue. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How to Open a Specific Folder in the Finder via Shortcut Key

    I'm sure this has been covered elsewhere, so sorry for not finding it...
    Is it possible to assign a shortcut key to open a specific folder with Automator or AppleScript? There are 4-5 commonly used folders buried 10-11 levels deep on a server and I'd love to have a shortcut key to open those particular folders in the Finder.
    Could you give me some assistance?
    Thanks!

    QuickKeys may work, or you can look on http://www.versiontracker.com or http://www.macupdate.com for other alternatives.
    Another option is to create aliases to those folders and store the aliases in a local folder which you can place on your Dock, the Finder window sidebar or toolbar.

  • How to access root apps folder again in Time Machine after a restore?

    I just did a Time Machine full system restore which worked, but now it doesn't look like Time Machine is backing up my root level apps folder. All of my root apps were indeed restored, but if I try to go into Time Machine with my (root) Apps folder open, it switches the folder contents to my user apps instead so I don't have access to the root apps in TM. It doesn't appear to be backing them up at the root level anymore either (nothing in the exclusions that would cause this). Any ideas on what happened here? I have just one admin level account on this machine.

    cubytus wrote:
    Hi everyone,
    I just reformated the MacBook hard drive using Extended HFS+, journaled partition to get rid of the case-sensitiveness, which is incompatible with just ONE of my softwares. As such, TM partition is formatted as Extended HFS+, journaled and case-sensitive.
    This mis-match is likely to cause trouble in the future. If you have, for example, two files named "FileA" and "filea" in the same folder on the TM drive, and try to restore them to your case-ignorant HD, TM is going to have a problem. I've never tried it, so I can't tell you whether it will overlay the first one it restores with the second, or crash, or what, but it can't be done.
    And you may have some of these without realizing it -- if you ever changed a capital to lower-case, or vice-versa, after a file's initial backup, it's a possibility.
    Indeed, I checked directly in the Time Machine tree on the external hard drive with Apple+I keys, and 'cubytus' was not listed in the permissions.
    No, TM automatically denies everything to everybody, among other things, in it's backups, to keep us mere mortals from messing with them. The original file permissions are kept separately, and TM should restore them along with the files, as they were.
    What you're probably seeing is, the user that you're signed-on as won't have those permissions, once TM restores the files. I'd suggest trying the same procedure as your other, or original user -- see if you get the same message.

  • How to access client specific data in VC through BAPI

    Hi Experts,
         I am Using BAPI to insert the values  in to the back end system from a form, But the values are not getting inserted in to the back end system. BAPI developed is in client 100 but through VC i am able to get the values only from client 800. can any one of you help how to access the data from client 100 in VC.
    Regards,
    Lakshmi

    Hi Prachi,
          Your answer is really very helpfull to me thanks a lot for your reply, but the data hasn't been entered in to back end system in client 800 also.In VC just i took the BAPI and from the input port of BAPI i have dragged and select ADD form then the UI elements had automatically added in to the form,now when i entered the values in the form and submit the values are not entered in to the back end system. I am not knowing where the error is.can you please help me out in this
    Thanks and Regards,
    Lakshmi.

  • How do I create a folder for private documents which can be password protected?

    how do I create a folder which can be password protected please?

    You can do this by creating a protected disk image.
    Instructions here http://www.macworld.com/article/154559/2010/10/password_protect_folders.html
    Or you can buy and use software like this one: http://www.apimac.com/mac/secretfolder/
    The disk image option is free and easy to do.

  • An existing folder doesn't appear in the library

    I don't see an existing folder in my library.  I try to import photos into lightroom, but it indicates that they are already imported and they supposedly exist in a particular folder.  However, that folder is not showing in my library.  Is there a way to correct this?  The photo is there but they only way I can see it is to search for it and it will appear.

    I don't mean to butt in (DJ Paige is quite competent..), but it's starting to sound to me like your catalog is a-wonk (a tad fouled up..).
    You didn't rename the folder outside Lr and change (just the) case, did you? - that can confuse the bee-geebers out of Lightroom (catalog is case-sensitive, sorta/mostly, but disk is not, at all).
    I mean, you can always try deleting preferences (.agprefs file in with presets) and see if it helps, but if not, I dunno - maybe somebody else will be more help.
    How far back do you have to go for a backup catalog which isn't so wonked?
    wlmsky wrote:
    My main concern is that it may happen to one of my larger folders with many photos.
    Has it ever happened before?
    wlmsky wrote:
    I should mention that I am using LR 3.6.
    Another thing to try: try upgrading the catalog using Lr5 and see if you still have the problem. Might even be a good excuse for an Lr upgrade .
    Cheers, and good luck,
    Rob

  • How to delete an album on Iphone 4s, which doesn't appear in Itunes?

    Hi
    can any help with this problem-
    I just recently bought an iphone 4s, I've 2 albums showing on my iphone under slightly different album names. But only one appears in itunes - how do I delete the second album if it doesn't appear in itunes?

    You don't have to reply back to my question thanks, i've eventually found the answer on the net - took some time  though. You simply swipe your finger on the album you want deleting and a delete option will come up, it's that simple.

Maybe you are looking for

  • TECRA S5 Nvidia Quadro NVS130M - Sudden BSOD - Win 7 Pro 32-Bit

    Having moved from Vista to Windows 7, everything was working fine until two days ago, when suddenly my Laptop stopped working. I was forced to hard reboot it, and then all hell broke loose. The problem is as follows: Part Number info: PTS53E-00S009EP

  • Does AOL work with mac..

    Ive been wondering how well does AOL work on a mac. And if poosible, can I use my airport connection to use with my aol browser. I have not gotten my iBook but I would like to know. THANKS

  • Where to maintain Turksih translation for customer specific status?

    HI gurus, How was your New Year? I am kindaa of stuck at maintaining translations from English to Turkish. To maintain translation e.g. For Ee grp I go to Table T501 > on the menu GOTO > Translate > select the language > enter Turkish words. but for

  • Webservice for soap with attachments

    HI I am try to develop webservice for soap with attachments for the sending images like jpg,tiff,gif. it works fine when I statically attach the file but when i pass dynamically the file name it will give me error for the call.invoke() method Followi

  • New to Jdev: having problem with Helloworld class and the jsp

    Please, i went through the beginner's tour at oracle site and it has been interesting. After putting the class name as Hello, the package name as "mypackage1" as in the example, then the extend field as java.lang.object There is always an error sayin