How to Access and Update Existing DW site using DW 5.5 on new laptop?

We already use InDesign and have recently upgraded to 5.5. At the same time my partner bought a new laptop and decided to upgrade his version of DW. This was an early version, with no upgrade path, so he bit the bullet and bought DW 5.5 No problems installing it on his new laptop. His site is extensive but very basic - no addons. He has a good basic grasp of html.
What he would now like to do, is to download the remote site onto his laptop from its host and in future update it from his laptop.(He travels a lot.) As I said it is an early version of DW, predates CS versions but is just basic html. Is there a generally accepted way of doing this? If so is it in the tutorials etc? He can't find it in theHelp for 5.5?
Just to add, the new laptop would be the only location on which the website wouldbe stored. This is so he can update it from the road and keep to a single version to update.

If you could bear with me a bit longer. My partner has an old version of DW and so some of the interfaces have changed.
Am I correct, he must open the local site on his old pc, using the orignal software on there, and then using Sites/Manage Site options export it in .ste format? (I am assuming his orignal DW version has these options.) Does he create the new export .ste version with the same name?
At this stage he should then have a .ste version of his site on his old computer. You say he should then" send" this file to the new laptop. Do you meant copy it onto a memory stick and import it to the new laptop as though it were a new file? Then go to the remote server to access the file there and update it?
One last question, my partner cannot find the command to access his remote site, in DW CS 5.5 - He says it is not where it is on his version. Where is the remote site access command in DW CS 5.5 please?

Similar Messages

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How to read and update the value of property file

Hi,
I am not able read the values from property file.
Please tell me how to read and update the values from property file using Properties class
This is my property file : - Config.properties its located in D:\newfolder
Values
SMTP = localhost
Now i need to change the value of the SMTP
New value :
SMTP =10.60.1.9
Pls Help me
Thanks
Merlin Rosina,

Post a small (<1 page) example program that forum members can copy and run that demonstrates your problem.

Logical database PSJ: How to access and link tables inside that???

Hi,
I have a requirement like :
I have to write one report which will display project statuses (PSmodule) using the LDB PSJ.. I am using LDB because I neeed dynamic selection screen.
I need to acees the data from table like 1. PROJ, prps_r and JCDS under the LDB PSJ.. but when I found the hirarchy of these table in the LDB , then all 3 tables are at same level.
then How to access and link data from theses 3 tables using GET and LATE command.
I did like below, but wrong number of records are coming
START-OF-SELECTION.
GET proj.
GET prps_r.
GET elm_ps .
GET jcds.
can anyone tell me, what 's wrong here.
points will be rewarded
for proper answer.
Regards,
Mrunal

hi ...get is like a loop in ldb. then if you use the 3 get statements then it will loop with in a loop with different data..

HT3281 How to download and update iso 6

I would like to learn how to download and update iso 6 in my iPad

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

HT2534 How to access and install appstore free apps without providing credit card number because I do not have one?

How to access and install appstore free apps without providing credit card number because I do not have one?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...
To summarize, you must first download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

How to edit and update table control into database?

I am doing table control. Here are my codes:
*& Report ZHERA_TABLE2
REPORT ZHERA_TABLE2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ZTABLE_CONTROL'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   ZHERA.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ZTABLE_CONTROL'
TYPES: BEGIN OF T_ZTABLE_CONTROL,
         NAME LIKE ZHERA-NAME,
         AGE LIKE ZHERA-AGE,
       END OF T_ZTABLE_CONTROL.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ZTABLE_CONTROL'
DATA:     G_ZTABLE_CONTROL_ITAB   TYPE T_ZTABLE_CONTROL OCCURS 0,
          G_ZTABLE_CONTROL_WA     TYPE T_ZTABLE_CONTROL. "work area
DATA:     G_ZTABLE_CONTROL_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ZTABLE_CONTROL' ITSELF
CONTROLS: ZTABLE_CONTROL TYPE TABLEVIEW USING SCREEN 1000.
START-OF-SELECTION.
CALL SCREEN 1000.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ZTABLE_CONTROL'. DO NOT CHANGE THIS LI
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ZTABLE_CONTROL_INIT OUTPUT.
IF G_ZTABLE_CONTROL_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'ZHERA'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ZTABLE_CONTROL_itab'
    SELECT * FROM ZHERA
       INTO CORRESPONDING FIELDS
       OF TABLE G_ZTABLE_CONTROL_ITAB.
    G_ZTABLE_CONTROL_COPIED = 'X'.
    REFRESH CONTROL 'ZTABLE_CONTROL' FROM SCREEN '1000'.
ENDIF.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ZTABLE_CONTROL'. DO NOT CHANGE THIS LI
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ZTABLE_CONTROL_MOVE OUTPUT.
MOVE-CORRESPONDING G_ZTABLE_CONTROL_WA TO ZHERA.
ENDMODULE.
Screen 1000 codes:
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'ZTABLE_CONTROL'
MODULE ZTABLE_CONTROL_INIT.
*&SPWIZARD: MODULE ZTABLE_CONTROL_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE ZTABLE_CONTROL_CHANGE_COL_ATTR.
LOOP AT   G_ZTABLE_CONTROL_ITAB
       INTO G_ZTABLE_CONTROL_WA
       WITH CONTROL ZTABLE_CONTROL
       CURSOR ZTABLE_CONTROL-CURRENT_LINE.
*&SPWIZARD:   MODULE ZTABLE_CONTROL_CHANGE_FIELD_ATTR
    MODULE ZTABLE_CONTROL_MOVE.
ENDLOOP.
MODULE STATUS_1000.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'ZTABLE_CONTROL'
LOOP AT G_ZTABLE_CONTROL_ITAB.
    CHAIN.
      FIELD ZHERA-NAME.
      FIELD ZHERA-AGE.
    ENDCHAIN.
ENDLOOP.
*&SPWIZARD: MODULE ZTABLE_CONTROL_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE ZTABLE_CONTROL_CHANGE_COL_ATTR.
MODULE USER_COMMAND_1000.
Please show me where to put my codes to edit(edit directly on table control fields) and update my table control(using the 'save' button)?

Hi,
You have to put the following code in the PBO of screen 1000.This code would make the fields editable to make changes in the table control fields directly.
Here there are 3 transactions.For create and change transactions, the fields will be in editable mode and for display transaction,they will be non editable mode.
DESCRIBE TABLE tb_line LINES lin.    " tb_line is the name of the internal table for the table control
tcl_item-lines = lin.                             '' lin hold the number of lines of the internal table
CASE sy-tcode.
    WHEN 'ZCREATE09' OR 'ZCHANGE09'.
***Checking if the table control is empty or not***
      IF lin NE 0.
        LOOP AT SCREEN.
***To make the screen editable****
          screen-input = 1.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          IF screen-name CS 'TB_LINE'.
****To make the screen non-editable if no values are present in the
***table control****
            screen-input = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
Once the fields are edited and the save button is pressed,the entered values have to be populated into the Z tables.The code has to written in the PAI of the screen 1000.Here the values from the work area of the internal table are moved into the Z Table. The code will be.
LOOP AT tb_line.
    ztm09_ekpo-ebeln = ztm09_ekko-ebeln. "ztm09_ekko and ztm09_ekpo are the names of the Z Tables.
    ztm09_ekpo-ebelp = tb_line-ebelp.
    ztm09_ekpo-matnr = tb_line-matnr.
    ztm09_ekpo-menge = tb_line-menge.
    ztm09_ekpo-meins = tb_line-meins.
    ztm09_ekpo-netpr = tb_line-netpr.
    ztm09_ekpo-waers = tb_line-waers.
*****Update the entries into item table*****
    MODIFY ztm09_ekpo.
ENDLOOP.
Reward if helpfull
Thanks,
Kashyap

Updating existing BP records using ELM

Hi experts,
We are using ELM for updating the existing BP records with marketing attributes.
We have created mapping format and maintained external list.
But not able to update the BP records.
We are using CSV format as below for mapping format
BP Number;FirstName;LastName;score1;score2
score1 and score2 are marketing attributes.
We could see some of the BP records in Data after Mapping tab of the external list but not all the records.
No BP record is updated.
Is there any difference in procedure creating new BPs and Updating the exsting BPs using ELM ?
Can any body explain in detail how to achieve the above.
Thanks in advance.
Regards,
Madhu

Uhh... JTable is a VIEW of the underlying data - you will need to implement action listeners to process these events.
The best place to do this would be in your TableModel.......

I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop. I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop. How do I do this?

I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)

Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy.

Advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

I am after some advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

If you have a dropbox account, there's a free app (probably more) that syncs photos to your dropbox account - picbox.
There's also PhotoSync that syncs photos to/from a number of different services and devices.

How can I copy my existing contacts from 1 Apple ID to a new one?

How can I copy my existing contacts from 1 Apple ID to a new one?

Click here and pick the option which best fits your situation. Rented movies can only be moved through the iPod and will not play on the new computer if any other method is used.
(98456)

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

How stream Video at host, at me site using Adobe Flash Media Streaming?

Please help me how stream Video at host, at me site using Adobe Flash Media Streaming? With using localhost and my ip I can just watch streaming in my computer. How should i configure my server to watch streaming at my site?
Please help!
Thank you!

Petro,
I have chacked code and changed src.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>SWFObject 2 static publishing</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<script type="text/javascript" src="scripts/swfobject.js"></script>
<script type="text/javascript">
swfobject.registerObject("flashId", "9.0.0", "flash/expressInstall.swf");
</script>
</head>
<body>
<div>
<object width="600" height="409"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback_101.swf"></param><param name="flashvars" value="src=http://192.168.100.4/hds-live/livepkgr/_definst_/liveevent/livestream.f4m&poster=http%3A%2 F%Fosmf.org%2Fimages%2Fposter_cathy_fmp.jpg&autoPlay=true"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback_101.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="600" height="409" flashvars="src=http://192.168.100.4/hds-live/livepkgr/_definst_/liveevent/livestream.f4m&poster=http%3A%2 F%2Fosmf.org%2Fimages%2Fposter_cathy_fmp.jpg&autoPlay=true"></embed></object>

</object>
</div>
</body>
</html>
But anyway I am facing same problem as I wrote already. I can see streaming just in my computer. From other computers it's writing error log. What should I do? Maybe I am trying to stream video at my site in a wrong way? I am using Adobe flash media Live Emcoder with Adobe flash Media Server 4.5. In my computer everything works fine. But I can't stream to otyer cimputers. Please help.

How to access the Text Frame, when we use scrollable frame,

Hi Friends,
How to access the Text Frame, when we use scrollable frame,
Thank you,
[ Nav ]

That's the same question:
how can I access something (a page item) on a page…
Answer: you need something unique in that object you can get a handle on.
Or you use the selection a user of your script is doing and work with that selection…
A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
If you have more than one "scollable frames" you need a second unique identifier for the particular object.
That could be nearly any property.
Keep in mind, there is no "scrollableFrames" collection in the DOM !
Uwe

How to Access and Update Existing DW site using DW 5.5 on new laptop?

Similar Messages

Maybe you are looking for