How to access cached content?

Today my Safari browser crashed. When I had it "reopen all windows from last session," the windows from a database I had been searching wouldn't go to the articles I'd had open because the addresses only seem to work if you're navigating there from the search. (And I did so many different searches, many of which I don't remember exactly, that I can't just replicate it that way.)
However, in each address I have there is a record number I can't use it to re-search the database, but I can use it to search Spotlight. It gives me the page, but, again, opening it like normal won't do any good. But if Spotlight can search all the text that has been open in my Safari browsing, I'm guessing there's some way I can access the content of those pages without opening them in Safari.
Does that make sense? I'm basically asking how to find and read the content of webpages I've accessed.
Thank you for any help you can offer. (By the way, I see that in the new beta version I could flip through and read all the pages that are in my history. I guess I should have upgraded to that yesterday!)

I should note that when I search for words I remember from those webpages, the links to those pages show up. This confirms my suspicion that the content is stored somewhere on my computer. Unfortunately, when I click on the returns from these searches, it just opens up the link to the page (which, again, doesn't ultimately work) rather than the stored data from when I opened it earlier. So I'm looking for the place where those words are stored...
Any thoughts now?

Similar Messages

As a new MacBook user I plug in my USB Flash Drive but don't know how to access its contents. Please help. Thanks.

as a new MacBook user, when inserting my USB Flash Drive, I do not know how to access its contents. Please help. Thanks.

Open a new Finder window, Finder > File > New Finder Window, and it should appear on the left under Devices.
If you don't see it there, or to get it to show up on the Desktop: Finder > Preferences... General tab, check External disks to have it show on the Desktop, Or Sidebar tab, check External disks under DEVICES.

Web Dynpro ABAP: How to access the content of a mime object?

Hi everyone,
does anybody know how to access the content of a mime object of a Web Dynpro component? I added a XML file as mime object to a web dynpro component. Now I want to read the content of this xml file within a method of the component controller. The code would look something like:
DATA: xml_content type xstring.
xml_content = read_mime_object("test_123.xml").
Any ideas?
Regards,
Nils

dude here's the modification that i've done but I can't still access the content of the properties...
           Mail mail = new Mail();
           String message2 = sqlException.getMessage();
           File file = new File("Add.properties");
           Properties props = new Properties();
           props.load(new FileInputStream(file));
           String[] emailadd = {props.getProperty("emailadd","defaultValue")};
           mail.postMail(emailadd,"An error has occurred, Auto-archive was unsuccessful.", message2,"[email protected]");
           Message was edited by:
ryshi1264

How to access the content in the configuration files

Hi, Folks,
To make it easy, the questions can be like this:
how to access the content in web.xml in a web application?
Through ServletConfig and context?
how to access the content in ejb-jar.xml in an ejb?
initial context?
Thanks

There is no documented way to delete data stored in archived log files: you can only remove the archived log files if needed.

UCM 11g - how to accessing secured content using open WCM service

Hi All,
Does any one has an idea on how to access the contents that are checked in with security groups as "Secured". If the contents are checked in as "Public" then, we can easily access the same with the following open WCM servervice:l
http://<ucm_server>:16200/cs/idcplg??IdcService=WCM_PLACEHOLDER&dataFileDocName=<data_file_name>&templateDocName=<region_template_name>
Regards,
Sanjay

Hi Donato,
Did you ever get an answer for this issue? I'm trying to get a similar case working and would be curious on how you ended up doing this...
For what I know so far, this may help you:
1) The trigger-EBSProfile requires you to pass th afGuid value, this value, is created automatically by the IPM process, basically, when you click the MA button in EBS, the SOA call to IPM does 2 things:
First, it creates a row in the AFGRANTS table in the WCContent DB, this basically overwrites UCM security and give the user access to the documents, this table has the information of the EBS record (Business Object, and Primary Key) as well as the auto generated afGuid
Second it sends back the URL to WCContent, mainly "/cs/idcplg/_p/min/af/trigger-EBSProfile?IdcService=GET_SEARCH_RESULTS_FORCELOGIN" and passes the afGuid created in the first step, which identifies the EBS record.
So if you need to make direct calls to UCM under the trigger-EBSProfile you will need to manually (custom) add the afGuid and details of the EBS record to the table, the entries in this table get removed automatically based on the dexpirationdate value
2) While the IPM SOA call overwrites the UCM security, if you have implemented your own security structure (assign a different security group to the documents and give the users access to it) you could make calls directly to UCM bypassing the "trigger-EBSProfile"..
for example, in the call you were trying to make originally to DOC_INFO, if you know the dDocName of the document, you can simply call the service as "/cs/idcplg?IdcService=DOC_INFO_BY_NAME&dDocName=POC2001" (I use DOC_INFO_BY_NAME because you need to know the dDocId for DOC_INFO)
You can do the same with other services like checkin/checkout etc, (for checking you will need to pass the additional parameters dfBusinessObejct, dAFBusinessObject and dfApplication to link the document to the EBS record)
Regards,
Juan Becerra

How to access Infocube content using an ABAP program

Hi,
   I am trying to access infocube contents using a ABAP program in BW.
   It is easy to access ODS content as we have NEW DATA or ACTIVE DATA
   tables. Is there any way we can access Infocube content.
   I tried using the FACT table but it has only Keyfigure data.
thanks
arshad.

Hi,
I would suggest to use a transactionnal cube, even if you do not use BPS to feed it.
Then, you create a layout in transaction BPS0 (~ similar to a query), and you can access the cube content by simply using the SAP function <b>API_SEMBPS_GETDATA</b>.
This is easy and fast.
Regards,

How to access group content, or anything inside?

Let's say I have this group:
var myGroup = Group{
     var someNumber:Number;
        var stf = SwingTextField{
             columns: 10,
              text: "TextField",
             editable: true
     content:[
          Text{
               x: 100;
               y: 100;
               content: someNumber;
               fill: Color.BLACK
                stf
}And let's say sometime when the program is running, the user changes the value of the SwingTextField. How do I access that? Like, I insert a rectangle inside the scene in the stage, and when the user moves the mouse it prints the content of the SwingTextField? And how do I access the variable "someNumber" as well? I tried things like println(myGroup.someNumber) or even println(myGroup) but nothing. Eclipse says it can't find "someNumber".
Thanks. JavaFX is a lot trickier than what it made me thought at first. It doesn't help that the tutorials I've read taught some bad habits.
_EDIT:_
I figured out myGroup.content[], but it doesn't let me access the attributes of the node, like when I use
myGroup.content[1].textIt can't find "text" even though it's already pointing to the SwingTextField (verified when I printed myGroup.content[1]), but the JavaFX documentation says it should have a text attribute.

If you look at the javafx doc for Group you will see that content is declated as a Node[] (a sequence of Node instances) which means each node included within will show up as a Node. It is up to you to cast it to its real type afterwards.
Alternatively, instead of direct access by index, you could set a unique id to each nodes and seach the content for a particular id. You will still need to cast afterward.

How to access loaded content of HTMLLoader

I have a HTMLLoader and after the content is loaded, I'd like
to access the loaded content. There should be an easy way but I
could not find it ...
And what if the loaded content is PDF?

Suppose you have:
var htmlLoader:HTMLLoader = new HTMLLoader();
//Add to display list, load content, etc...
Then you can access the window object of the loaded page
thusly:
htmlLoader.window
If the HTMLLoader loads a PDF file directly, I suspect that
under the covers AIR embeds it in an HTML page. So you could still
access htmlLoader.window and then find the PDF object in the page.
(I haven't tried this myself, though.)

How to access request content using MultipartMessage Object

I want to take a file from the Client and upload it as a FileInputStream on the server.
I have a simple form as follows:
<form action="scan" name="scan_files" method="post"
enctype="multipart/form-data">
<input type="file" name="file1">
<input type="file" name"file2"/>
<input type="Submit" name="insert_scaned" value="Upload"/>
</form>
In my servlet I tried to use the com.sap.engine.services.servlets_jsp.lib.multipart.MultipartMessage
class to parse the form information.
protected void doPost(
HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
MultipartMessage multipartMsg =
(MultipartMessage)request.getAttribute("com.sap.servlet.multipart.body");
if (multipartMsg != null) {
     multipartMsg.addFormParametersToRequest();
The help said that once this is done the form information should be accessible via the
request getParameter() method. However, I can't seem to get it working?
How can I access the file so that I can parse it into a FileInputStream?
Thanks.

Hi Mat,
first, welcome on SDN!
About your question:
From the APIDoc - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/javadocs/nw04/sp12/j2ee%20engine/com/sap/engine/services/servlets_jsp/lib/multipart/multipartmessage.html - I would expect this as a solution:
MultipartMessage multipartMsg = (MultipartMessage)request.getAttribute(MultipartMessage.MULTIPART_BODY_KEY);
if (multipartMsg != null) {
for (int i = 0; i < multipartMsg.getCount(); i++) {
    MultiPart mp = multipartMsg.getBodyPart(i);
    // mp.getInputStream, mp.getBody() or whatever you need
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

How to access contents of textframe

Hi all
I've a textframe which contains the group of images pasted using 'paste into' command, any idea how to access the contents using script, i've tried
var inlineFrame = myDocument.stories.everyItem().textFrames.everyItem().getElements();
unfortunately this doesnt work for this case as the images or textframes are pasted using pasteInto command.
any suggestions ?

Try this:
#target InDesign
var _allRectangles = app.activeDocument.rectangles.everyItem().getElements();
for (i=0; i<_allRectangles.length;i++) {
     if (_allRectangles[i].groups.length > 0) {
           var _imgArray = _allRectangles[i].groups[0].rectangles.everyItem().images.everyItem().getElements();
           alert("Rectangle " + i + " contains a group with " + _imgArray.length + " images.");
Roland

Accessing KM Content by Code

Hey...
The standard iView for KM navigation does not satisfy me in UI manner so I try to create a new UI.
I'm trying to code a new GUI with my own design with JSP and HTML coding, to explore KM content in SAP Portal.
But I don't know how to access KM content, so I can create just linkages to these content with my GUI.
Can you tell me which JAR's I have to use for just access to KM Content and can you give some sample codes ?
Thanks for your responses.

Hi,
To access KM content you have to use the repository framework provided by SAP.
Particularly you can use IRepositoryManager interface and Iresource etc.
See the details from [here|https://help.sap.com/javadocs/NW04S/current/km/index.html]
You can also have some guidance about making on GUI from [here|https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1424]
I hope it helps.
Regards,
Sumit

ANN: Learn how to invalidate cache and handle exceptions

http://otn.oracle.com/sample_code/tech/java/codesnippet/webcache/index.html
These set of New OracleAS Web Cache How-to's illustrates how to invalidate cached content using esi:invalidate and PL/SQL invalidation tags. Also, learn how to esi exceptions using esi:try, esi:accept, and esi:except tags.
Cheers,
-Srikanth

You may use any of the two ways:
1. Use the interface. Go to Navigator, and go to that particular page where that portlet is, and then edit it. Go to Properties/Cache. See at the very bottom of the page for how to clear cache for that page.
2. See details of the api function for cache invalidation.
wwpro_api_invalidation.execute_cache_invalidation;

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles pannel because it's locked. I would also like to know how I shold tag my cove content. I dont' want rea

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles panel because it's locked. I would also like to know how I should tag my cove content. I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts. What should I do y'all?
Thanks,
Josh

Hi Rob,
From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
Further please follow the steps mentioned below to use Story to PP workflow.
Create a new Film script in Adobe Story
Create scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
Hit enter, hit TAB
Enter the name of the speaker, hit TAB or ENTER
Copy over the transcribed text
Build your script this way
Number scenes from the production menu
Export ASTX file for your script : File->Export->.astx
Open Premiere Pro
Create a new project, bring in media
In the project pane, find the "Scene" column
For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
Click out of the scene box in the project panel in Ppro
Right click on the scene that you just assigned a scene number to and select – attach Story script
Select the .astx fle you exported in step 8
Click ok
You should now see the script data in the metadata panel for the clip in the metadata panel.
You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
Let us know if this is helpful.
Thanks
Rashi - Story Team

How to access to audit tables in Oracle Content DB version 10.2.0.0.1

Hello,
Could someone tell me please how to access to Oracle Content DB audit tables as:
ODMZA_RAWAUDITEVENT
ODMZA_AUDITEVENTPROPERTY
ODMZA_AUDITEVENT
ODMZA_AUDITOPTYPE
ODMZA_AUDITTARGETCLASS
ODM_INTERMEDIAAUDIO
ODM_AUDITINGCONFIGURATION
ODM_AUDITTYPEENTRY
ODM_AUDITSPECIFICATION
ODM_AUDITTYPELIST
ODM_AUDITTARGETSPEC
Could you tell me the way to view all these audits logs?
Which interface should I have?
Thanks for your help.
Alex

Hi
Yes you can directly apply path set 10.2.0.4
Note 839187 - Oracle 10.2.0: Applying patch set/patches/patch collection
Regards
Uday

How to access Accordion section content data?

Hi Experts,
I have a accordion UI with four sections and each section has table as its content.
I want to know how to access table data present in the section ?

Hi
would you be able to share some code so that we can help you?
Thanks
-D

How to access cached content?

Similar Messages

Maybe you are looking for