How to access CRM 2015 On-Premise from Azure web application

hi,
I have deployed a MVC Application on Microsoft Azure. I was wondering Is it possible to access(read and write records like we do normally in local deployment) CRM On-Premise from Cloud or Do CRM 2015 should be IFD deployed?
Any pointers will be highly appreciated.

Hi,
I don't familiar with CRM 2015 On-Premise, but it seems that this is a feature request, please access this website:
https://zapier.com/zapbook/microsoft-dynamics/windows-azure-web-sites/, you could also ask this issue at CRM forum.
Disclaimer: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to access a Portal User Info from a J2EE application?

Hi,
I have deployed a j2ee application in portal and its running fine.
from that application i need to assign some roles to some users.i have the user id.
so my doubt is can i access the portal user info from this j2ee application?i have some servlets in the j2ee application....can i get the portal user info from this servlet?
plz help me
regards,
Visweswar

Hi,
Please check out this to get the portal user information from Java -
WdClientUser class/Interface to aciehve this.
Please check out these links on the same -
WDClientUser.getClientUser IUser
help needed
Regards
Lekha

How can access MS Outlook Calender information from my Java application.

People schedule meeting with some data on regular basis.
I need to access the Exchange server from my Java application and get the meeting dates along with other data pertaining to meeting.

I had the same problem, and I dont think (as far as my knowledge goes) there is any freeware that will enable Java to access Exchange server. But there are some commercial products that are available.
Chk this link as an example: http://www.compoze.com/products_hme_desc.html
good luck in the research
-kms

Import Solution from CRM 2015 online to CRM 2015 on premise faild Error: {1}{0}

Hi,
i was trying to import a solution into a crm 2015 on premise System which I've exported from a crm online system (also CRM 2015 without the last Update).
On the crm server I do have Administrators rights.
When I try to Import the solution I get the erro Message
error: {1}{0}
Does anybody know, how I can get the information why this error occures?
Greeting Ferdinand

Hello,
Try looking for the specific error in the CRM Trace folder.
To enable tracing, please read
this post.
Cornel Croitoriu - Senior Software Developer
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

How To Access PAGE ITEM (single row) from HTML source

Hi Guys,
I have a page Item that return a string.
I would like to show this string
How To Access PAGE ITEM (single row) from HTML source?
My desire final output is
<marquee>:P1_PAGE_ITEM</marquee>
Can please help me
Thanks

Hi,
You can refer the page items in your page header as &itemname. For example, if I have page item P15_TEST, I will add the following in header:
<marquee>
&P15_TEST.
</marquee>But make sure that you have a process before header to populate the value in your page item. Otherwise, there will be a null scrolling (which you can't see!) :)
Regards,
Zahid

How to update survey in Complaint from developed web application

Hello,
We've setup complaint management including the usage of surveys within a complaint document.
Complaint documents are accessed using the SAP GUI but will also be maintained using a newly developed application in the Enterprise Portal.
To access the survey using the external web application I need to know how to call the URL for the survey within a complaint transaction. I know how to setup the survey parameter xml but that allows me to call the survey irrespective of a transaction document. How do I call a URL that allows me to bring up a survey stored within a complaint document (is there for example a parameter I can pass to the URL indicating the GUID of the document the survey is in?
Thanks,
Patrick

I have used local ejbs in other application servers, WebSphere and JBoss, from discrete web applications running in the same VM as the ejbs. The requirement for local interfaces is that the ejb and client be running in the same VM. Maybe Weblogic is different in that respect, but I doubt it. Why marshal data through a Remote interface when both components are in the same VM?
I have gone through the Weblogic documentation and have not been able to find an answer to my question, which is why I posted the original question the way I did. Weblogic does not put the ejb in the jndi namespace, but the ejb can be acquired through jndi. In the Weblogic console deployments view I can see the bean deployed as CustomerBean, but there is no clue as to its jndi name. This forum is peppered with different schemes for accessing an ejb, but none of those has worked for me, hence the different names I tried.

How to call a report from a web application

Hi,
I have a web server in wich is installed Reports 6i. My question is how can I call reports 6i to generate a pdf using a .rep file from my web application (built with java)?

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

Is it possible to access Pages from an web application running in Safari in i-Pad?

Is it possible to access Pages application from an web application running on safari browser in iPad ?

Since you control the application AND the plugin - you can define ANY method of communication you want. Shared files, shared memory, IPC, named pipes, etc.

How can I move photos in iPhoto from the WEB Photo Stream or WEB Facebook to one of my Events?

How can I move photos in iPhoto from the WEB Photo Stream or WEB Facebook to one of my Events?

From PhotoStream either drag the photos form PS to the iPhoto window or set the iPhoto peference to automatically import PS photos
From Facebook save to isk and import from there
LN

How can I download a .pdf document from a web link without Adobe Reader starting automatically and i

How can I download a .pdf document from a web link without Adobe Reader starting automatically and preempting the download?

That depends on your operating system and browser. On Windows, e.g. using Firefox, you right-click on the link, then select 'Save link as...'.

How to run notepad from a web application

hi
can any body know,how to run notepad from a web application under tomcat

You already asked this question:
http://forum.java.sun.com/thread.jspa?threadID=5150005&messageID=9561597
Obviously running notepad on the clients PC is not possible (ignoring active x)

How do I invoke a Adobe Plugin from another Client application

Hi,
I have written a plug in for Adobe.
I need to know how do i invoke this plug in from an external application
For
e.g a VB.NET Form has a button which on clicked would invoke this plug in
Thanks for your suggestions in advance

Leonard
I would like to know how to do it
I know that you can use IAC to call a plug-in
I need to know the function call that i need to make in order make it happen
MenuItemExecute doesnt seem to work for me.. or maybe i am doing something wrong there
I can call menuitemexecute("SaveAs") but menuItemExecute("MyMenuItem")
doesnt work
Please advise

Call BW query from a Web application

Hi,
I am trying to call a BW query from a Web application. Could you please let me know how to pass the parameters to the query.
Thanks,
Rekha

I don't know about db2 APIS, but you can use JDBC to connect to DB2 physical files/tables with the DB2 driver. You would need the jar file with the driver info though. I've done this with the webshpere appserver.
import com.ibm.db2.jdbc.app.DB2Driver;
Class.forName("com.ibm.db2.jdbc.app.DB2Driver");
connectionVar = DriverManager.getConnection("jdbc:db2://SERVERNAME/LIBRARY", "user", "passwd");
That's the basic info that will get you connected and then you can access any files or tables that are in that library with SQL. You would have to use the Java API though - statements, resulsets etc. Hope it helps.

Calling web applications from another web application

Hi everyone,
I direly need your suggestions on how to implement the following requirements:
I have a web application (i.e. App A). Then I have other web applications (i.e. App B, App C, App D, etc.) .
For each of the other apps (App B, App C, App D), I need to have 2 variable/attribute settings whose values are to be set (pre-defined) per user.
Meaning one user's values are different from another user.
In App A, I need to call App B, App C, & App D one by one to get the values of the 2 variables/attributes for a particular user accessing App A.
How should I implement this whole scenario such that I can set the values for 2 variables/attributes in App B, C, & D on a per user basis?
Please help me get ideas on what methods or work-arounds to implement in order to achieve this.
Thanks.
blm

Assuming this is running on a server, how about placing your data in application scope?
All applications have access to it. Just make sure every object put in application scope is uniquely named
and that your other application knows its name. One suggestion is to put a collection object (such as a List) in application scope and add items to it. This way, every application will know the collector's name. They can then search through the collection for any object addressed to itself. Just make sure you send data into and out of the collection in a thread safe way. such as by synchronization.
Here is an example of an object that you can store in the collection:
MessageObject{
String fromApplication;
String toApplication;
String message;
}

Capture an image using the web camera from a web application

Hi All,
Could anyone please share the steps what have to be followed for capture an image using the web camera from a web application.
I have a similar requirement like this,
1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.
3) Upload the Image to the server from the temporary location.
Please share the details like, what can be used and how it can be used etc...
Thanks,
Suman

1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)There's not really any good way to do this with JMF. You'd have to somehow create a JMF web-start application that will install the native JMF binaries, and then kick off the capture device scanning code from the application, and then scan through the list of devices found to get the MediaLocator of the web cam.
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.You'd probably be displaying a "preview" window and then you'd just want to capture the image. There are a handful of ways you could capture the image, but it really depends on your situation.
3) Upload the Image to the server from the temporary location.You can find out how to do this on google.
All things told, this application is probably more suited to be a FMJ (Freedom for Media in Java) application than a JMF application. JMF relies on native code to capture from the web cams, whereas FMJ does not.
Alternately, you might want to look into Adobe Flex for this particular application.

How to access CRM 2015 On-Premise from Azure web application

Similar Messages

Maybe you are looking for