How to access .dat files

Every once in a while, I get email from friends in the PC world with attachments that are .dat files. Is there something or someway to read these?

http://www.macupdate.com/info.php/id/12705/tnef%60s-enough
http://www.macupdate.com/info.php/id/22614/omic
Then tell them to have their mail server administrators setup their mail server correctly, as not everyone on the world uses Outlook.

Similar Messages

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

How can access data in rman output file "daily.log"

Hi All,
i did use following query for rman out
output file "daily.log" has been created,but does not exist data.
how can access data in output file "daily.log"
bash-3.00$ sh rmant.sh
Recovery Manager: Release 10.2.0.3.0 - Production on Thu Jun 30 16:54:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEV (DBID=45558086)
RMAN> Spool log to daily.log;
2> run
3> {
4> backup databas;
5>}
6> spool log off;
7>
Spooling started in log file: daily.log
Recovery Manager10.2.0.3.0
Starting backup at 30-JUN-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=634 devtype=DISK
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00014 name=/u02/proddata/a_int01.dbf
input datafile fno=00022 name=/u02/proddata/a_txn_data01.dbf
input datafile fno=00023 name=/u02/proddata/a_txn_data02.dbf
input datafile fno=00024 name=/u02/proddata/a_txn_data03.dbf
input datafile fno=00039 name=/u02/proddata/a_txn_data04.dbf
input datafile fno=00038 name=/u02/proddata/undo02.dbf
input datafile fno=00027 name=/u02/proddata/a_txn_ind03.dbf
input datafile fno=00028 name=/u02/proddata/a_txn_ind04.dbf
input datafile fno=00012 name=/u02/proddata/undo01.dbf
input datafile fno=00015 name=/u02/proddata/a_media01.dbf
input datafile fno=00025 name=/u02/proddata/a_txn_ind01.dbf
input datafile fno=00026 name=/u02/proddata/a_txn_ind02.dbf
input datafile fno=00029 name=/u02/proddata/a_txn_ind05.dbf
input datafile fno=00021 name=/u02/proddata/a_summ01.dbf
input datafile fno=00019 name=/u02/proddata/a_ref01.dbf
input datafile fno=00020 name=/u02/proddata/a_ref02.dbf
input datafile fno=00001 name=/u02/proddata/system01.dbf
input datafile fno=00002 name=/u02/proddata/system02.dbf
input datafile fno=00003 name=/u02/proddata/system03.dbf
input datafile fno=00004 name=/u02/proddata/system04.dbf
input datafile fno=00005 name=/u02/proddata/system05.dbf
input datafile fno=00006 name=/u02/proddata/system06.dbf
input datafile fno=00007 name=/u02/proddata/system07.dbf
input datafile fno=00008 name=/u02/proddata/system08.dbf
input datafile fno=00009 name=/u02/proddata/system09.dbf
input datafile fno=00010 name=/u02/proddata/system10.dbf
input datafile fno=00011 name=/u02/proddata/system11.dbf
input datafile fno=00013 name=/u02/proddata/a_archive01.dbf
input datafile fno=00036 name=/u02/proddata/sysaux01.dbf
input datafile fno=00016 name=/u02/proddata/a_nolog01.dbf
input datafile fno=00037 name=/u02/proddata/izu01.dbf
input datafile fno=00017 name=/u02/proddata/a_queue01.dbf
input datafile fno=00018 name=/u02/proddata/a_queue02.dbf
input datafile fno=00031 name=/u02/proddata/odm.dbf
input datafile fno=00034 name=/u02/proddata/portal01.dbf
input datafile fno=00035 name=/u02/proddata/sfx01.dbf
input datafile fno=00030 name=/u02/proddata/ctxd01.dbf
input datafile fno=00032 name=/u02/proddata/olap.dbf
input datafile fno=00033 name=/u02/proddata/owad01.dbf
channel ORA_DISK_1: starting piece 1 at 30-JUN-11
channel ORA_DISK_1: finished piece 1 at 30-JUN-11
piece handle=/sw/weekly_cum_database_DEV_t755196858_c1_s24_p1 tag=WEEKLY_CUM_DAT
ABASE comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:32:55
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 30-JUN-11
channel ORA_DISK_1: finished piece 1 at 30-JUN-11
piece handle=/sw/weekly_cum_database_DEV_t755198834_c1_s25_p1 tag=WEEKLY_CUM_DAT
ABASE comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 30-JUN-11
Spooling for log turned off
Recovery Manager10.2.0.3.0
Recovery Manager complete.
bash-3.00$

i did try this but it hangs
bash-3.00$ sh rmant.sh
Recovery Manager: Release 10.2.0.3.0 - Production on Fri Jul 1 10:52:01 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEV (DBID=45558086)
RMAN> Spool log to 'daily' append;
2> run
3> {
4> backup as backupset
5> incremental level=0 cumulative
6> device type disk
7> tag "weekly_cum_database"
8> format '/sw/weekly_cum_database_%d_t%t_c%c_s%s_p%p'
9> database;
10> }
11>

I am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...can u pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

How to access xml file using c

how to access xml file using c. are there any libraries regarding xml fastinfoset in c? Please let me know about any resources if u know? thanks!!!
samitha

There are different methods to access XML data which have pro's and cons. Let us know more about what you want to do and we can help you.

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

I have a new iMac cannot find how to access my files in Dreamweaver

I cannot find how to access my files, as I am now using Yosemite and it is all a different layout .
can anyone get me started please
Clicking on the cloud icon is no help

Copy the entire /Music/iTunes folder to /Music/ on the new computer.
That is all you need to do.

How to access host files?

how to access host files?

Easy and not depends on your software version:
press Shift+cmd+G while your finder window is open and active, you will get a new window with the field where you can write /etc/hosts
Anyway to edit hosts file you should open it with the sudo command, this can be done in terminal window, not in Finder. Also easy and can be done next way:
press Shift+Cmd+U while Finder window is open and active, then choose Terminal.app, and after it opens enter sudo nano /etc/hosts. You will be asked for password - this is the password you enter then you installing new application. You should know few commands to edit your hosts file:
Previoius page/Next Page of the file - Ctrl+Y/Ctrl+V
Add record - Input the text you need on the last free line of the file and then press Ctrl+O
Delete record - put cursor on the line you want to delete and press Ctrl+K
Undo - Ctrl+U
Exit - Ctrl+X
After edit your hosts file you should update DNS records - in terminal window enter the command dscacheutil -flushcache
But if you really don't know what are you doing, my advice is do not touch your hosts file, ask for professional to do his job. Just like I'm doing usually. )))

How to access Data Guard option in Oracle 10g OEM

Hi All,
I have Oracle 10g ENTERPRISE EDITION on Unix envoirement. I want to setup logical standby Database through Data Guard technology. But when I brows through OEM I do not find Link for DATA GUARD????
1) How to access Data Guard option from oracle 10g OEM.
2) Does It come with Enterprise Edition OR I have to install it separately.
Regards,
Darshan

I am managing almost everything through EM Grid Control. It is easy to setup and configure.
Anyways, if you have read the documentation on
Oracle® Data Guard Concepts and Administration and setup your environment accordingly then you should not have any problems. Atleast I can assure you that your production database will not be affected by it.
Just make sure that you follow each step and read thoroughly. If you have spare machines then you can test and record your configuration before performing it on your production db. This link will provide you with the information on DataGuard.
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/concepts.htm
If you think that way then you will never be able to do any new stuff since you will always fear that something might go wrong. Go ahead pal, try it on test machines and you will know that it is not that difficult.
There are real experts who help people like us in this forum and I know that they are doing a pretty good job.
All the best.
Rgds
Adnan

How to access pdf files on icloud with iphone

Does anyone know how to access pdf files on icloud when saved to icloud on a mac?

At the moment, you can't. A favourite complaint. Hopefully, the situation will change in the near future, but only Apple knows when or if.

How to open dat file in labview

how to open dat file in labview.???how to make use of biomedical startup kit for doing so???

Please post this question on the Biomedical User Group here: www.ni.com/biomedusers
This is where you will find the best support for the Biomedical Starter Kit.
Steve
Visit the NI Biomedical User Group at:
www.ni.com/biomedusers

HT1766 how to restore data file from back up on iPhone 5 docs to go

how to restore data file from back up on iPhone 5 docs to go

If it backed up the lock file, then Lightroom was open when Time Machine ran, and the backup therefore may be corrupted. You could try restoring that backup (without overwriting your week ago version) and see if it'll open. If it does, you're off and running. What methods have you tried?

How to access my files

My main computer (G5) failed and it's been repaired. But for the time being I'm working with my laptop. When I try to access my files in Time Capsule (Time Machine) I don't get the option to look at my G5 backups. When I click on the Time Capsule Icon in the side bar of the Finder window I see the G5 Sparse Disk Image Bundle that is 228.35 GB
How can I get the files I need from the G5 backups in Time Capsule?
Blue skies!!
Jerry

It's very very simple.
Just double-click to mount the sparsebundle image.
Drill down a bit, and then you will see folders that are arranged in dates with the latest copy called "Lastest".
After you're done just unmount it.

How to access Excel files from different locations?

Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

The custom function sets the MS-Excel default directory to System.getProperty("user.dir")+"/excel"
(the domain directory), then opens the filename passed as a parameter. I assume
that if you pass in the fully specified path for the excel file ( like d:\MyDir\data\test.xls),
that it would open that file.
- Mike
"Ashok Gupta" <[email protected]> wrote:
>
Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run
it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files
from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

Tungsten T3 - need to access DAT file with addresses - Please Help

I have an old Palm Tungsten T3. The desktop computer with the synced address data has died and the T3 has lost power (so no addresses anymore).
I have a .DAT file backup with all my addresses. Can anyone advise how I can get access to these.
Reinstalling Palm Desktop 4.1.4e did not help as it doesn't allow me to import .DAT files.
Can I import this file into any other app or open up in Excel etc?
Any advice would be much appreciated.
Thanks in advance.
Post relates to: Tungsten T3
This question was solved.
View Solution.

You have to physically copy the .dat file into the User directory over the existing address.dat file. Find the one with your hotsync name abbreviated (i.e. - C:/Program Files/Palm (or PalmOne)/ your Hotsync name /address) and copy the .dat file there.
Be sure you copy the file and keep another one safe in case something goes wrong. The existing blank address.dat file will be only about 2k in size.
Good luck!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to access .dat files

Similar Messages

Maybe you are looking for