How to access different Agent from differnt schema in ODI?
Hi,
I am new in ODI and doing some practical assignment related to ODI agent.
here on one system i.e. 198.168.100.22 my colleague install ODI and another system 198.168.100.21 I also have installed ODI this is my system with different schema of each.
We also have created standalone agent of each system and Test successfully. We run so many session with this standalone agent.
Now we have to configure his agent in my system and vice-a-verse, he also configure my agent to his system.
we try tried it but for my agent , the Test is SUCCESSFUL but when I created another agent with the same name & his hostname the Test is fail.
Please anybody suggest us how would I access his agent in my system & test successfully(Work Successfully).
Thanks
ODI-1424: Agent host or port cannot be reached using http://192.168.100.29:20910/oraclediagent.
Here, the IP(100.29) in URL looks different than 2 IPs' that you have specified above.
Also, In topology, the ODI agent should be configured with hostname where ODI Standalone Agent is installed.
will create only one Master Repository and under that will create the 2 work repository
Yes, this sounds good.
Regards,
Santy
Similar Messages
-
For transport different quatation from differnt agent in SAP
Is it possible in standard SAP,For transport different quatation from differnt agent ? If it possible,how?
Hello,
is this question related to the PC-UI? Can you describe more details of the process you need.
Regards
Gregor -
How to access Cyrillic glyphs from Trajan Pro 3 Regular?
I can download Trajan Pro3 regular in greek and latin glyphs but not in Cyrillic. Using Mac OS 10.7.5, Font Agent Pro 6.010.
No EULA Licence Agreement in russian, but Adobe told me I bought the right font (with cyrillic glyphs).Thank you a lot.
The first downloading was not correct. I loaded again, and now it is ok.
Best regards
Catherine Anderegg
Anderegg Graphic
Le 23 févr. 2015 à 21:10, MiguelSousa a écrit :
How to access Cyrillic glyphs from Trajan Pro 3 Regular?
created by MiguelSousa in Adobe Type - View the full discussion
Yes, the Trajan Pro 3 fonts have Cyrillic glyphs in them. You need to use Unicode-encoded text to get to them.
Википедия
Cyrillic script in Unicode
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7222734#7222734 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7222734#7222734
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Type by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How can we copy table from one schema to other schema
Hi,
I have create one table in one schema and i want to copy it to other schema.How we can copy table from one schema to other schemaHi,
You can try something like this :-
SQL> CONNECT SYS/SYS123@SERVER AS SYSDBA
Connected.
SQL> CREATE USER TEST_1 IDENTIFIED BY TEST_1;
User created.
SQL> CREATE USER TEST_2 IDENTIFIED BY TEST_2;
User created.
SQL> GRANT CONNECT,RESOURCE,DBA TO TEST_1;
Grant succeeded.
SQL> GRANT CONNECT,RESOURCE,DBA TO TEST_2;
Grant succeeded.
SQL> CONNECT TEST_1/TEST_1@SERVER
Connected.
SQL> CREATE TABLE TEST_COPY ( TEST_COL NUMBER );
Table created.
SQL> INSERT INTO TEST_COPY VALUES ( 1 );
1 row created.
SQL> INSERT INTO TEST_COPY VALUES ( 2 );
1 row created.
SQL> COMMIT;
Commit complete.
SQL> GRANT ALL ON TEST_COPY TO TEST_2;
Grant succeeded.
SQL> CONNECT TEST_2/TEST_2@SERVER
Connected.
SQL> CREATE TABLE TEST_COPY AS SELECT * FROM TEST_1.TEST_COPY;
Table created.
SQL> SELECT * FROM TEST_COPY;
TEST_COL
1
2Regards,
Sandeep -
How to Access Maintenance View from a program
Hi Experts,
I have created a maintenance view for a table. i want to insert data's into the table through the maintenance view. I don't know how to access the view, how to insert data into the Maintenance view. Please suggest me how to access the view from the program.
with regards,
James...
Valuable answers will be rewarded...Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu -
How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?
Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel GavinhosHi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos -
How to access the cloud from my pc?
how to access the cloud from my pc?
Go to Verizonwireless.com, log in to your account (or register your phone number if you haven't done so). Once logged in, Go to My Verizon, My Device, Backup my contacts. That should bring you to your Cloud "dashboard" - where you can view Contacts, Photos, Videos, Music,Documents, and anything else you've sent to Verizon Cloud.
If this doesn't work for you, then where does it break down? Do you get any error messages? -
How to access the Oracle from Unix when SID is not provided?
How to access the Oracle from Unix when SID is not provided.
User Name : xxx
Password : yyy
SID : SID
I use to access it using below command from Unix prompt:
sqlplus xxx/yyy@SIDNow since I dont have SID, how to access the Oracle DB from Unix Box?
User Name : xxx
Password : yyy
Service Name : zzz
Regards,
Sunny.Hi Ajay
Thanks for the suggesstion :)..It worked as well.
The Actual problem was in the "tnsnames.ora" file where in I need to make entry for the new SERVICE name.
Now I am able to connect it properly.
Regards,
Sunny. -
Can anybody tell how to access web service from Message Driven bean
Can anybody tell how to access web service from Message Driven bean
Can anybody tell how to access web service from Message Driven bean
-
How to access Excel files from different locations?
Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok GuptaThe custom function sets the MS-Excel default directory to System.getProperty("user.dir")+"/excel"
(the domain directory), then opens the filename passed as a parameter. I assume
that if you pass in the fully specified path for the excel file ( like d:\MyDir\data\test.xls),
that it would open that file.
- Mike
"Ashok Gupta" <[email protected]> wrote:
>
Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run
it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files
from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta -
How to access form objects from different class?
Hello, I am new to java and i started with netbeans 6 beta,
when i create java form application from template i get 2 classes one ends with APP and one with VIEW,
i put for example jTextField1 with the form designer to the form and i can manipulate it's contents easily from within it's class (let's say it is MyAppView).
Question>
How can i access jTextField1 value from different class that i created in the same project?
please help. and sorry for such newbie question.
Thanks Mikehmm now it says
non static variable jTree1 can not be referenced from static context
My code in ClasWithFormObjects is
public static void setTreeModel (DefaultMutableTreeNode treemodel){
jTree1.setModel(new DefaultTreeModel(treemodel));
and in Class2 it is
ClasWithFormObjects.setTreeModel(model); -
How to access a value from "List of Values" by giving a name?
I have a "List Of Values" defined in my BI Report. It comprises list of label-value pairs.
I have defined a parameter :p_Value for the above "List Of Values" defnition. this parameter is used in datasource sql defnition to filter the query results. I configured a template which has a table that shows all the parameters used for filtering query results. If I give <?$p_Value?> in the template then the parameter value is rendered on it. But I want the "name" of the parameter and not the value. Can anybody tell me how to access name of the parameter which refers to one of value in "List of Value" defnition?option 1:
Can you get the value from the DB in the report sql ?
You have the code, inside the report query, if you can get the decoded value form that
option2:
create another paramater, LOV and query, and make it as hidden, and use the first :param_1_value in the lov query in the second param and decode the value.
Now , you can refer the :PARAM_2_value in template which will have decoded value. -
How to access icloud account from another iphone
My iphone fell in the water. I am on vacation and need to access info from my calendar. How can i do it from another iphone device?
Just enter your account details under:
Settings > Mail, Contacts, Calendar
and add your account.
Finished. -
How to Upgrade Target Agent from 10.2.0.3 to 10.2.0.4
Hi Everybody,
I am doing this first time so need some help
Q1. I need to Upgrade Target Agent from 10.2.0.3 to 10.2.0.4 manually and can't seem to find the right patch I need.
I tried p3731593, but this seems to be installing much more than what I need so I cancelled it
One option I thought of was to uninstall 10203 agent and install 10204 in the same agent home But I was wondering if there is a way I can upgrade my agent.
Q2. Does the agent version on target and host(OMS) need to be same or can I have Target Agent 10.2.0.4 and host agent 10.2.0.3?
Thanks for helping in advance
JeetHi Jeet,
You can use Patch 3822442 to upgrade the agent.
The agent can be of different version.
Regards
Lai -
How to remove the agent from console?
Hi,
I have agent(10.2.0.3) ,i need to remove the agent from gui ,where no targets configured under that agent.
I have stopped the agent(emctl stop agent),while i removing it from gui it prompts message
"To delete this target, you must shut down the management agent first".
Let me know,how to remove the agent successfully.
Thanks,
Regards,
Vinothyou need to stop the host agent. go to the (Host) grid agents home .. mines located here /oracle/grid/agent10g/bin . then type
./emctl stop agent
then log back into GRID and try and remove
Maybe you are looking for
-
How long does it take to write data from network analyzer
I am using LabVIEW to control two DC power supplies through GPIB-USB and I have a DAQ-6008 generating 8-bit digital output. I am connecting two DC power supplies and the 8-bit digital signal to my circuit and want to measure s parameters (all S11, S1
-
Dear Madam or Sir, I can't access my old emails anymore. I use to have Outlook Express and contacted Microsoft. The old emails are still there but I can't access them. Microsoft support couldn't help me to get them back and told me to contact you. Ca
-
Upgrading Ultra 5 Solaris 2.6 to V280 with Solaris 8 or 9
Our Ultra 5 still runs Solaris 2.6. What's the easiest way to upgrade this box (hardware and OS), without having to re-install all apps? We're looking at used V280s, but I figure they will not run Solaris 2.6, so an upgrade is needed. Should I first
-
Clarification on the Addin-error of "Maximum number of rows processed [250000] exceeded [250190]" when suppressing zeros and missing. I'm using v11.1.2.1 and my essbase is connected to the Add-in. In my properties file, I'm seeing SmartView settings
-
Adobe After Effects CS4 won't install.
Ok, so I got Adobe After Effects CS4, because my computer is only 32-bit. I clicked on Set Up to install it and the little grey box that says 'Do you want to allow the following program to make changes to this computer' appears. I select Yes, the box