How to access DMS through portal

Hi
We are planning to implement SAP DMS and also EP.
I want to know how to connect sap dms from r3 to EP, so that we can upload documents from KM to the content server.
I think the DMS to KM connector provides only read/display functionalities.
Please give me any useful documents/ links on this
Thanks in advance
Prasad

Hi Prasad
I will need same usage in future on a new project. DMS to KM provides only read/display really? And if you have documents can you send to me please.
Thanks

Similar Messages

Enable to select a check box in ALV while accessing it through portal

Hi All,
Currently I have given a link on portal to run a transaction code. The output of the program is ALV report, where user any select the check boxes.
Now when I try to select a check box, it is not getting selected. I click on the checkbox, the tick appear and then the screen refreshes itself and the tick goes off. This is happening only when accessing it through portal. If i run the program in R/3 directly, I am able to select the check box.
Please advice on this.
Thanks
Namit

Reported to SAP for the same.

How to access dataprovider through jsp syntax

I am creating an image gallery but here's my issue...
I have a database table that contains links to images on my file system. I created a dataprovider for this database table on my page so the dataprovider now returns all the image links.
Now what I need to do is create a row of thumbnails so I add a scriptlet in my jsp code where I want the thumbnail to appear. This scriptlet loops through the dataprovider and for each row it will create a standard html image tag populating the src attribute with the link from the dataprovider.
I figure creating dynamic html img tags is much easier than creating dynamic image components in the backing bean. Doing the former allows me to output the row of thumbnails exactly where I want them on the page (ie where i put my scriptlet code) and is easier to manage.
The problem is i don't know how to access the dataprovider through jsp tags and syntax. I'm sure there must be a way, can anyone help?
Thanks.

I've done this sometimes using scriplets:
<%
request.setAttribute("SOME_CONST", Constants.SOME_CONST);
%>
<c:out value="${SOME_CONST}" />But I would also be interested if anyone knows a way without those ugly scriplet..
O

How to access Enter prise portal

Hai Friends,
EP is implimented in our co., I am new to EP. How 2 login 2 EP and how to Access plz tell me the procedure clearly.
I hope that I ll get spontanious answers from ur side.
Regards
Jaggu

Hi Jaggu,
Before you access EP you had to know the portal link and have portal logon information already.
For example:
http://<fully qualified computer name of EP server>:5<Instance number>00/irj/portal
If EP server name is test.domain.ext and instance number is 00, then
http://test.domain.ext:50000/irj/portal
After you enter the portal link on IE browser, a logon page will be comes up.
Then you can login if you have portal user account.
Best Regards,
Jacky

How to trigger Alerts through Portal

Hi,
How to generate alerts from portal and send to users based on some criteria?
Regards
Stan

Any help on this gurus???

Urgent: Issue while accessing MSS through portal

Hi All,
Recently HRSP 70 was applied to R/3 system. And after that we are getting scenario does not exist when clicked on MDT->Reporting->choose report e.g. Education->Select people -> and start report through portal.
And we got Scenario does not exist error.
We referred HRWPC_FC_EXEC error and applied following settings :
For service: sap/bc/gui/sap/its/hrwpc_fc_exec
1) Go to GUI Configuration and set the following parameter
    Parameter name: ~webgui_theme
    Value: sl
2) Then go to transaction SITSPMON -->Template and Mimes tab
    Invalidate template caches
After this what is happening is a bit wierd though a workaround is found.
Now when user clicks start report through portal he gets a popup for SAP inbox mentioning there are xx documents unread, if he clicks on ok he again gets "scenario does not exist" . However if he goes and reads all the documents in inbox and then again execute start report through portal he can see the desired output.
Now still if we just go to sicf transaction in R/3 and just right click on HRWPC_FC_EXEC and execute Test Service we still get Scenario does not exist
Also note we have reports iview with MSS1 scenario and viewgroup in Selection Criteria is a Z group
Where in R/3 side should these entries be maintained ?
Can anyone please suggest what would be the connection of unread documents here with scenario ? And where is scenario missing ? Kindly let me know if any other input is needed.

Hi Joyce,
Yes we were able to resolve it, we added one more parameter "NO_LOGON_USEREXIT" with value "1" in GUI configuration of the service "HRWPC_FC_EXEC". This resolved our issue.
Try it at your end , let me know if any issue.
Regards,
Jalpa Shukla(Bhatt)

How to access Internet through proxy server

Please help... I cannot get Internet access through a proxy server at work.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Accessing DMS through HTTP Request ...

Hi everyone,
I have searched almost everywhere to find a solution and to prevent duplication to my problem, but no luck!
We are having SAP DMS, and i found a way to connect to the content server through the following sentax:
http://servername:port/script?command&parameters
I am using the following Script: ContentServer.dll
and trying to get a document through the following command: docGet, so I am requesting the server with the following link:
http://servername:port/ContentServer.dll?docGet&parameters,
I have managed to prepare almost all the parameters required to retrieve a document, and when i execute the link, it is prompting a user name and password.
I don't know what shall I provide to retrieve that document.
Also, is there any good way to find the docID without having to do database tracing?
Thanks and Regards...

Thanks Rajes,
I have contacted SAP and raised an OSS with the following:
We are trying to retrieve a document from SAP eDMS, and we have figured out that the retrieving process is done through an HTTP Request. We have tried with the following URL:
http://eDMSServer01:1090/ContentServer/ContentServer.dll?docGet&pVersion=0046&contRep=Z_DMS_SPC&docId=F01F621C23CD7447B8316A3EFAEB8CB4
But it is giving the following Error Message:
401 (Unauthorized)
Security: Verify SsfEncode failed rc=3,lasterror=0, (null)
So our question is: Can we create a URL that will retrieve a document from our SAP eDMS? If so, how to create that URL?
Also, is there any standard way to retrieve docID without tracing the DB Transaction?
and they replied to me saying:
You cannot directly retrieve a document from the content server for
security reasons.
In order to create a URL (link) to a document that is available in
EasyDMS, use the function 'Copy as URL' or 'Send as URL' from the
EasyDMS context menu.
So I have installed Easy DMS, and figured out how to retrive a document from our DMS. however, I couldn't find Copy as URL or Send as URL from the Context Menu!!
Any Idea, please ....

How to include limit switches into my control loop and how to access them through Labview

I'm developing a six degrees of freedom machine with servo motors,UMI flex6 and Labview-5.1.I was unable to access the limitswithes.So I would like to know the connections diagram,UMIflex6 board settings and the Vi's to be included in the program.please help me out in solving this problem.

Hi Kolakanuru,
Thanks for using our discussion forums. How you connect your limit switches depends on what type of motion board you are using. For example, if you look at the connection diagram for a PCI-7344, you can see that Forward Limit switches connect to pins 39, 45, 51, and 57. These will then pin out directly to the UMI. For the connection diagram for your particular motion control board, you can go to www.ni.com/manuals and pull up the necessary information. In regards to reading this in LabVIEW, the first thing you will want to check out is Measurement and Automation Explorer. In the interactive windows for your board, you can check the limit switch status there- Press your limit switch on and off and make sure that it changes the LED in MAX. Once that i
s all set, then you can go into LabVIEW and use the "Read Limit Status" VI which you can find in Functions>>All Functions>>NI Measurements>>Motion>>FlexMotion>>Motion I/O palette. Good luck with your application.
Regards
Dan
National Instruments

Access workflow through portal application

HI everyone,
we are working on a portal application for PO approval processo which reads the workflow inbox and displays in the portal, now when users hits on an workitem , two button are displayed approve and reject and when user hits on approve , the next level approvers are displayed and when the user hits on the next approver, the flow has to go to backend and the workflow needs to proceed.
Now that the portal development is fine but after the user chooses the next approver , how exactly the workflow should continue.
Is there any way by which we can make this work and after user chooses the next approver the workflow will send the mail to next level approver.
we are missng the link how to link the workflow

KandaRaj,
This is possible by configuring UWL (Universal Work List) in Portal.
Please look at this Document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
Ram

DMS Document access through Portal

Hi Sap Gurus,
we are in the process of integrating SAP DMS with Enterprise portal 6.5, and SAP DMS on 6.0 SP 12, ie the latest Version,
when we try to access or view the documents in Portal, we could only see those which have been maintained through Easy DMS, ie.. the folders and documents created in EDMS only is visible
The Documents which are created in normal DMS, ie the document types and all the documents are not visible in Portal view. any one who have seen or managed DMS through Portal let me know can we see all the documents through Portal or only those maintained in Easy DMS,
can we avail all the funtionality in Portal to manage the documents just like we do in DMS. what are its limitation.
Pointa awaiting
Thanks and regards
Priya S

Hi,
The Kpro Tick is been given to all the document types i have configured,
i dont know if i have to enable any other KPRO feature apart from this,
if any one have made DMS and Portal integration, please let me know is Portal access is only for Document maintained by Easy DMS, or it is for all the documents of DMS, (is there any note to be implemented to avail this feature)
also we are planning to have Trex search engine for Portal file search, can this same Trex be used be for searching files inside DMS also.
Points eagerly awaiting.
Regards
Priya S
Edited by: Priya S on May 6, 2009 12:59 AM
Edited by: Priya S on May 7, 2009 10:41 AM

Accessing codebase through http (RMI)

Hi
I am C prgrammer and now badly stuck wid my new found luv- java!
I am working on RMI, where I have a simple client program, sending Hi, Hellos to my server program. Then I created a new class in my rmi client side and tried to send it through the interface to the server. Server gave unmarshelling errors.. which i guess is bcoz it doesnt know about the classes in client side. I follwed similar threads here, and could make out that i must specify a codebase visible to the server where it can see the client files..
I created a policy file in the server as this-
grant codeBase "file:/E:/work/java/"{
permission java.security.AllPermission;
permission java.net.SocketPermssion "*","accept,connect,resolve";
My client fils are in E:/work/java ...
I am getting errors in server side--
Exception in thread "RMI TCP Connection(1)-127.0.0.1" java.security.AccessControlException: access denied (java.net.SocketPermission 127.0.0.1:2014 accept,resolve)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
and client says--
java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
java.io.EOFException
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:203)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at rmi.client.RmiClient.main(RmiClient.java:33)
Caused by: java.io.EOFException
i know I have done a blunder there.. I also followed from prev threads that I have to specify the codebase as a URL, but again I dont know how to make my client files accessilbe through http ? my files are in say E:/work/java/client directory.... how to access this through URL?
also i tried this on linux where my files are in root/client/ ..
Can you java Gurus help me in solving this, in both the windows and linux versions..
Your help is gr8ly anticipated
thankssss

Thanks..
But the thing is if I specify my policy file as
grant {
permission java.security.AllPermission;
permission java.net.SocketPermission "*","accept,connect,resolve";
I can send simple messages from client to server..
But when i try to put the code base as
grant codeBase "file:///E:/client/"{
permission java.security.AllPermission;
permission java.net.SocketPermission "*","accept,connect,resolve";
It always gives the error
Exception in thread "main" java.security.AccessControlException: access denied (java.net.SocketPermission 127.0.0.1:3232 connect,resolve)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     at java.security.AccessController.checkPermission(AccessController.java:427)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     at java.lang.SecurityManager.checkConnect(SecurityManager.java:1034)
     at java.net.Socket.connect(Socket.java:513)
Can you tell me what am i missing...?
My server code looks like this-
public static void main(String args[])
try{
     System.setProperty("java.security.policy", "E:\\work\\java\\client\\x.policy");
     if (System.getSecurityManager()==null){
System.setSecurityManager(new RMISecurityManager());
Thankss

Accessing codebase through http in RMI

Hi
I am C prgrammer and now badly stuck wid my new found luv- java!
I am working on RMI, where I have a simple client program, sending Hi, Hellos to my server program. Then I created a new class in my rmi client side and tried to send it through the interface to the server. Server gave unmarshelling errors.. which i guess is bcoz it doesnt know about the classes in client side. I follwed similar threads here, and could make out that i must specify a codebase visible to the server where it can see the client files..
I created a policy file in the server as this-
grant codeBase "file:/E:/work/java/"{
permission java.security.AllPermission;
permission java.net.SocketPermssion "*","accept,connect,resolve";
My client fils are in E:/work/java ...
I am getting errors in server side--
Exception in thread "RMI TCP Connection(1)-127.0.0.1" java.security.AccessControlException: access denied (java.net.SocketPermission 127.0.0.1:2014 accept,resolve)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
and client says--
java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
java.io.EOFException
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:203)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at rmi.client.RmiClient.main(RmiClient.java:33)
Caused by: java.io.EOFException
i know I have done a blunder there.. I also followed from prev threads that I have to specify the codebase as a URL, but again I dont know how to make my client files accessilbe through http ? my files are in say E:/work/java/client directory.... how to access this through URL?
also i tried this on linux where my files are in root/client/ ..
Can you java Gurus help me in solving this, in both the windows and linux versions..
Your help is gr8ly anticipated
thankssss

Any time you see this:
java.security.AccessControlException: access denied (XXX)for any XXX you need to add the permission XXX inside the brackets to your security .policy file. The syntax required is similar but not identical - read the Javadocs.

How to edit a standard Portal page in NWDS

I'm looking for a guide explaining how to pull a standard Portal Web Dynpro in to Netweaver Developer Studio, make changes to it, and deploy the changed copy to the Portal.
I have experience with the Portal and with adding ABAP Web Dynpros to it, but I'm new to NWDS and Java Web Dynpros.
I've searched online extensively but haven't been able to find a guide explaining how to access the standard Portal Java content.

Hope you mean to edit WebDynpro java application in NWDS. In this case, You need NWDS (on your desktop) and NWDI (to be configured on java server) to modify any standard WebDynpro java application.
Read the below help to understand better:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/68d64260752a78e10000000a155106/frameset.htm

How to Access data from SAP Content Server through SAP Portal

Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
Ahmad

If your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew

How to access DMS through portal

Similar Messages

Maybe you are looking for