How to access DNS settings - AirportUtility ver. 6.2

My Airport Utility ver. 6.2 appears corrupted & my Airport Extreme Setup Guide has no relevant instructions for accessing & editing DNS addresses.
My primary Mac X 10.7.5 and backup Win7 computers are fully functional but both produce 'page not found' and 'server timeouts/not located' browser errors for two specific URLs. I am told that my OS or hardware is at fault - but as yet cannot confirm what precisely is at fault. I have added DNS addresses to my Mac with the same results.
URLs at Issue:
www.mindmixer.com
www.activate-wichita.com
I suspect I need to access the DNS settings for both my Airport Extreme and my cable modem (Motorola Model NVG510).
Please advise &/or comment - Thanks

Hmm. I managed to get it work for me. By the way, that's my site, it's just pretty old now. I need to fix the downloads and I guess I need to update that article
I edited the file in TextWrangler, and at some point it changed the permissions on the file to ME, which caused it not to ask me for authentication any longer. But it definitely CAN work. I managed to get all of the frames to show in my Copy of Keynote 6.
Edit: Wow, I haven't posted here in 5 years.

Similar Messages

How to access BIOS settings in Bootcamp Windows 7?

I need to reset the BIOS boot order in my Bootcamp partition to boot first from a DVD/CD, such as a Windows 7 repair disk. What are the steps to get there?

There is no BIOS, so you can't access the settings.

How to access proxy settings in terminal

I want to use git in the terminal, but unfortunately I'm sometimes (but not always) behind a firewall that requires me to use a proxy server.
I've successfully set up environments for all these locations, including the proxy settings that are relevant in each context, but I'm unable to access them in the terminal (i.e. there's no HTTP_PROXY environment variable). My idea is to 'inherit' the system wide proxy settings in the terminal and use them to configure git.
Is there any way to access the proxy settings in the terminal.

In you home directory, create a file called .bash_profile (notice the leading dot)
nano .bash_profile
add to that file
export HTTP_PROXY="http://your.proxy.information:nnn"
Save the file
Restart the Terminal session.
Command line Git should work via the environment variable you just created.
NOTE: you will need to use
ls -a
to see the .bash_profile in a Terminal session, and because the leading dot makes it an invisible file, the Finder will not show it without some magic Finder Foo

Anyone know how to access 'APN Settings' ?

Can anyone tell me the steps to locating the APN Settings that I was told should be in the Advanced Options menu- but isn't there? I've got a BB Curve 8530 and need to make sure the TCIP selection is correct. Gotta be there somewhere- but I can't find it! Thanks! Aidan

Hello,
This KB documents where to find the APN settings. Note carefully that if a theme is running, many things (including this) could be somewhere else...and the theme is in control of that, so there's no way to diagnose it. Falling back to the default theme should allow the KB to point in the correct direction.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I change the DNS settings to BC but keep the MX setting for emails?

How do I change the DNS settings to Business Catalyst but keep the MX settings for emails?
I'm basically created anew site using Muse and want to host it on BC and upgraded to the Web basics + to allow for hosting of downloadable pdf's etc.
There are up to 50+ emails address set up on the current set up and I want to just change the NDS settings for the domain to ponit to the new site/hosting an not have to worry about them chaning all the meail settings etc.
Records do I need to change in BC?
Thanks
Iain

Hi,
You shouldn't need to do anything as long as you do not state hosting email with BC. Just ensure to check you DNS in a lookup tool that it's still referencing your external email service.
Otherwise you can set up external email set-up if the option is present.
- http://helpx.adobe.com/business-catalyst/partner/set-email-external-email-provider.html
Kind regards,
-Sidney

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

How can i access security settings to stop PDF being copied?

How can i access security settings to stop PDF being copied?
I'm trying to secure my documents so others can not convert file to word or copy and paste information to edit

Keep in mind (and Acrobat will alert you to this fact) that protections that you set in Acrobat are enforced by all Adobe products but the 3rd-party PDF Viewers may ignore them. There are even Web sites that will strip protections that you set in Acrobat. This is not a reliable technology these days. Acrobat keeps it mostly for backward compatibility for those users who use only Adobe Acrobat/Reader.

How to access settings on airport extreme?

How do i access the settings similar to a cisco router through the default ip address?

I assume that you have already followed the steps in the Setup Guide to get the AirPort up and running.
Not sure what you mean by "optimize". The AirPort Extreme is already set for maximum broadcast power, fastest performance, etc.
Unless you have specific need to change an existing setting, you can leave the AirPort in its default setttings.
Once the AirPort is intially set up, If you need to access the settings, you already have the info to do that above.
Hold down the option key while you double click on the AirPort Extreme icon to get into the settings.
When you do that, your screen will look like this:
You also have a 40+ page manual built into the Help file. Click Help at the top of the screen, then click AirPort Utility Help.

How to access application server 10g, if client machine is proxy settings.

hi,
i have installed oracle application server 10gR2, on vertual machine, windows2003
my forms are stored in forms folder , i can access the application/forms
throuhg client machines, if proxy setting is unchecked, but if proxy is chacked can't access application.
as there with the user machine is required with proxy setting. how
to access the application. i mean what is the configuration.
in application server so that any computer (client machine)
can access weather it is having proxy setting or not.

now i enabled the java console to see the trace, there i found. if proxy is checked in client brouser with 8080 port which is required by organisation.
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\fresh
Proxy Configuration: Manual Configuration
Proxy: eproxy:8080
Proxy Overrides:
Jar cache disabled by user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Where as if there if i remove proxy setting by uncheck. then application goes smoothly.

How to reset password on an ipad. I can't access the settings the iPad is locked

How to reset password on an ipad. I can't access the settings the iPad is locked.

If you are talking about the restrictions Passcode - there is no way to reset it. You have to restore the decide to factory settings. If you restore from a backup, and the Passcode is in the backup, that will not work since you will be restoring the Passcode that you cannot remember back onto the device.
The only thing that would work is if your backup was created before you put the Passcode on the iPad. The Passcode would not be in that backup and you could restore from that one.

Our company recently has changed our DNS settings to our network which has resulted in many of our iPhone users not being able to access Outlook mail on their phones. Any ideas out there?

Our company has recently changed our DNS settings for our network mail server, and upgraded our SBS to 2010 Microsoft Exchange. Since that change, most of our iPhone users have not been able to acquire e-mail from our mail server. We have three exceptions are 3GS and 4 phones. Any ideas???

Speak to your exchange & DNS administrators at your company.
It is likely a configuration issue on the server/network side. Event/IIS logs are key on your SBS.

How do I access profile settings in ios 6? I used to be under general settings in ios 5.

I am trying to access profile settings in ios 6.0.1, but it is not there on my iphone 4s. It used to be under general settings in ios 5. Can anyone help? I am trying to delete a profile setting that I do not use anymore.

So, the profile section is the place where you can add, for example, a wifi profile from your school that is used for authentication, or a profile from freemyapps. This is the profile I am talking about. I am not able to find it on the 4s in ios 6 for some reason. Do you guys know? Would really appreciate it.

E71 PC Internet Access DNS Problem

Hi all,
Got a bit of a problem which I hope someone knows the answer to.
I'm currently triailing tethering on an E71 for our corporate network. I've got the phone connected up and installed Nokia PC Internet Access on my machine; all good.
The problem I'm having is that we use a private APN at the mobile carrier to connect back to our network, and this does not advertise automatic DNS settings to clients. I can get connected to the APN no problem at all but without DNS servers on the connection, it's fairly useless.
Now, I can see that the PCIA application uses Dial-Up Networking behind the scenes to actually connect up, and I have tried to specify manual DNS servers on that connection, but every time I reconnect using PCIA, it resets everything back to automatic, which doesn't work.
Anyone got any ideas on forcing manual DNS servers on a connection when using PC Internet Access?
Thanks all!

Nobody? This is the way how Nokia does NOT care us. Nokia is now dead

Lock in DNS settings

All,
As an admin, how do I lock myself out from changing the dns settings on my machine, allowing only another trusted user/admin access to those specific settings, without compromising the full fledged functionality of my admin account?
-jeremy

How about not messing with them? I don't get it, you don't trust yourself not to mess with the settings? I don't think there's any way for one admin to control the access of another admin.

Memory Problem on 790fx-gd70 - how to access DDR Voltage in BIOS?

I have been getting memory related problems on a 6 month old system. I could only boot from one stick of RAM (Corsair TW3X4G1333C9A) but even then system was not stable for gameplay or stability test though this stick did pass overnight memtest. I returned the board, cpu and memory for them to test. They diagnosed faulty RAM and replaced. Well it worked OK for 24 hours then I started getting BSOD "PFN_List_Corrupt" and "Memory_Management" crashes.
I tested the new sticks and one fails memtest after a few seconds with 2378 errors and the other, although it passes memtest with 20 passes, crashes out straight away on Prime95 Blend Test (i.e. the one that stresses RAM).
They suggested I enter DDR Voltage manually rather than relying on Auto but no matter what I seem to enable this option is greyed out. Does anyone know which settings need changing from defaults so I can get at the voltage section?
I have tried swapping around the dimms but they are all the same regardless so not a slot problem. Now of course, I don't see it as a RAM problem either unless I am the unluckiest person to keep getting bad sticks. So now I think maybe something on the board or CPU is causing damage to the RAM or at least causing it to mis-report. Could a fault in the memory controller be doing this and if so how can I test for this?
At my wit's end here. Hope someone has some ideas - either on how to access DDR Voltage in the BIOS or get to the cause of my problem.
Many thanks.

OK thanks for explaining a bit more . This power unit did get some very good reviews in the sub $100 from many sites and from these I thought it would suit my needs. I have arranged to try a friend's 650w next week.
I think I am maybe not being clear. I have had the system running OK for six months. I had had no need to test the ram and didn't bother with stability tests at that stage. I am not a gamer and use my machine more for video and graphics work. One thing I did notice from the start was the couple of games I do have on (Call of Duty and Fallout3) would give occasional freezes. I put it down to my now rather old hot GPU which I would get around to replacing in due course.
Now the real problems started recently when I got round to replacing the stock cooler with a Titan Fenrir. Trouble with this is it overhangs Dimm1 but in moving around the memory sticks I seem to have opened a real can of worms. I could only get it to boot from one of the sticks. This stick passed memtest but would crash out of prime95 and games would freeze within a couple of minutes.
Now, the retailers here in the UK told me to send back board, cpu and RAM. They tested all 3 but they only replaced the memory and as you can see from my first post the memory related problems have continued. The memory by the way is in Corsair's list as "100% tested compatibility". Is it possible that something about the CPU/Board that is damaging the RAM? If a stick is failing memtest (it failed another test too called Windiag) is that definitive? It is bad for sure or board/cpu misreporting? Am I right in thinking memtest86 does cannot distinguish faulty RAM from faulty memory controller? Is there a test I can do to check if the CPU alone is faulty?
I don't know if this means anything to you guys but when I ran the prime95 (Blend) recently with both sticks in it failed straight away on 2 cores but went on running on the other 2.
One of my other frustrations is I don't know anyone else with am3 board or memory so swap things around.
Any suggestions for pinning this down would be much appreciated. Just don't assume my knowledge is as great as yours . But I do learn. I never knew v x a=w for example. And I now know how to change DDR Voltage in the BIOS - I had been expecting a sub-menu where Auto was greyed out and in fact it was just sitting there waiting for me to press + and -. Very embarassing that I spent hours trying to change this when the instructions on what to do were right there in the help column!

How to access DNS settings - AirportUtility ver. 6.2

Similar Messages

Maybe you are looking for