How To Access Fiori Launchpad on Native HANA

Hi Friends,
I want to access Fiori launchpad on Native HANA so that I can create and configure application tiles etc.
Can somebody guide me in this and point to a post as everywhere I am getting post related to HANA Cloud but I want to explore Fiori Launchpad on Native HANA server.
Regards,
Rauf

Hi Rauf,
Fiori Launchpad can be accessed only using Gateway
But you can create Fiori Like Launchpad in HANA using UIS
To know more, check HANA SHINE content:
http://help.sap.com/hana/SAP_HANA_Interactive_Education_SHINE_en.pdf
Regards,
Vivek

Similar Messages

  • How to access Fiori App Content (consuming HANA Live models) directly from XS in HANA?!

    Hi,
    Can someone please provide more information on how to use the Fiori Content directly on HANA?!
    Is there any Delivery unit which bundles the Fiori content, importing and deploying of which allows to create a Fiori App?! If no,
    Then could you please provide the guidelines for adding ABAP front end server on HANA to run the UI part?!
    And for the latter case, will the requirement of the UI be rendered by ABAP front end server with the  XSODATA service provided by XS layer and the business logic computation taken care  by Indexserver?!
    Thanks a lot in advance,
    Poorna

    Hi Poorna,
    Please look at Installation of SAP Smart Business Products on SAP HANA Server - SAP Fiori for SAP Business Suite - SAP Library.
    Regards, Masa
    SAP Customer Experience Group - CEG

  • How to activate Fiori LaunchPad

    Hi all,
    We have installed SAP NetWeaver Gateway 7 and we activated SAPUI5 addon.
    But how to configure the SAP Fiori Launchpad after this.
    Please help me on this.
    Thanks
    Sathish

    Hi Sathish,
    You can search documents in help.sap.com.
    Setup of SAP Fiori Launchpad - Configuration of SAP Fiori Infrastructure - SAP Library
    Regards,
    Masa

  • How to configure Fiori Launchpad

    Hello Everyone,
    I'm struggling for a few days now to get the Launchpad running.
    Would anyone be so kind to give me a step by step description on how to configure the launchpad?
    I read about different urls (launchpage/launchpad) and tried to figure out how LPD_CUST works to generate the launchpad tiles, (or chips ?) but unfortunately I can't get it working.
    I don't have the tile to choose from to add to a group in the admin page.
    I added the roles mentioned SAP_UI2_* to my user already.
    Release is 740.
    At the moment I have only the PO Approval app running and tested which works fine standalone.
    Thanks a lot for advice.

    I went trough the webservices again and found an issue with the "transport" service which wasn't generated correctly.
    The SICF node wasn't activated and the system alias was missing which I've updated now with local and U5C_800_PGW.
    But when I go to .../arsrvc_upb_admn/main.html I receive this error:
    Error in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
    Details: Data Provider implementation 'ZTRANSPORT_MODEL_0001_BE' '01' 'DEFAULT' does not exist
    Any idea?

  • How to access android resource in java native extension....??

    hi..
    i want access android resource..
    for example, res/menu/menu.xml, res/values/strings.xml ... etc...
    - R.java -
    /* AUTO-GENERATED FILE.  DO NOT MODIFY.
    * This class was automatically generated by the
    * aapt tool from the resource data it found.  It
    * should not be modified by hand.
    package com.flash.extension.nativelib;
    public final class R {
        public static final class attr {
        public static final class drawable {
            public static final int icon=0x7f020000;
            public static final int notification_icon=0x7f020001;
        public static final class layout {
            public static final int main=0x7f030000;
        public static final class string {
            public static final int extension_app_name=0x7f040001;    -> "hi extension"
            public static final int extension_hello=0x7f040000;
    so i used getResourceId("string.extension_app_name");
    but it's not work.. throw NotFoundException error..
    so i used context.getString(R.string.extension_app_name);
    it's work, but return incorrect value.. -> return value is "0.0.0".. it's versionName in actionScript Client Project..
    why can't access android resource in native extension?
    how to get android resource in java natvie extension..??
    Is there anyone who has a sample source??
    help.. me.. please..

    Hello,
    I am facing the same issue with the native extension i am using follwing code to get the resource id
             Intent inte = new Intent(context.getActivity().getApplicationContext(),SecondActivity.class);
              inte.putExtra("layout",context.getResourceId("layout.secondactivity"));
              context.getActivity().startActivity(inte);
    i am getting this exception "android.content.res.Resources$NotFoundException:layout.secondactivity"
    I have included activity in the native manifest file as well as flex's manifest file for android.
    please help me with this or an example will be great thanks.

  • How to access an Oracle Lite 10.2 from native VC++ 2005 mobile app

    Hi,
    I'm developing a MS VC++ 2005 mobile app than will run on Mobile 5 ARM devices. This app needs to connect to an Oracle Lite 10.2 Lite database that is currently installed on those devices.
    I know that the MFC and ATL libraries are not "fully" supported on the mobile platform I need, so I need a way to connect to the Lite database, as those libraries don't provide that kind of functionality.
    I've been looking around for ways to connect to a Lite Database using VC++ 2005 native, but nothing seems to work!
    I've tried SODA but I simply couldn't connect to the database. After that, I've tried OLEDB, as I folowed articles on adapting MFC oledb.h to the mobile platform. Useless, because the articles focused only SQL Server CE.
    Anyone can give me a clue how to access the lite database from VC++ 2005?
    Isn't there any library like the Oracle.DataAccess.Lite_wce.dll for the CF.NET I can use?
    Thanks in advance.
    -- Manuel Costa

    Marc,
    Where can I find those libraries? Are they available to download in the Oracle site?
    The SODA Api has very few documentation, only an Oracle HTML document.
    Do you know any links with useful tips and examples I can use?
    By the way, the Soda API I tried implemented the try-catch exception handling using a special lib (not the try-catch available in the standard VC++ 2005). Has this been changed in the more recent versions you pointed out?
    Thanks in advance.
    -- Manuel

  • How to access the stored password list of N9 nativ...

    How to access the stored password list of N9 native browser?

    most everything should be listed here.
    there was a way to see the website data and stored information, but not the passwords. they were ************
    you were only able to delete the login information, and unfortunately, since i have not used the device in so long, have forgotten the language.
    so you will have to dig a bit.
    it was a command that you would enter into the browser address bar.
    if it comes to me i will repost, but for now...check here.
    http://talk.maemo.org/showpost.php?p=1104892&postcount=1

  • Fiori launchpad designer not starting on ERP HANA trial

    Dear all,
    I would like to start the FLP designer using URL: http://yourip:50000/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html?sap-client=100&sap-language=EN
    Trying this ends in:
    I have done a search and took a look to: SAP Fiori - SAP Fiori launchpad troubleshooting
    but Im not able to find something matching regarding my issue or maybe dont understood something properly. In fact the message is telling me gateway is down, as I got it the demo case should contain anything that needs to run Fiori stuff properly. Did I missed some configuration maybe? Thank you,
    regards

    Sorry, own fault, client 100 was a bad idea, works well on 102.
    cheers

  • Calling ABAP Webdynpro app in FIORI launchpad

    Hi All,
    Could anyone help me with launching an existing ABAP webdynpro application in FIORI Launchpad.
    We just moved to HANA Enterprise Cloud and would like to know how we could launch an existing ABAP Webdynpro application using FIORI Launchpad.
    Any help/documentation would be greatly appreciated.
    Thanks,
    Shiv

    Hi,
    Please follow instruction defined here - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611a2f-ba23-3210-60b5-d26402db0f2e?QuickLink=index&…

  • Fiori Launchpad - Are Catalogs Missing

    Hi,
      We are doing an install of FIORI, having upgraded our system to EHP 7 - and
    SAP_UI 740 0007 SAPK-74007INSAPUI User Interface Technology 7.40.
    We use a single server for the moment for the gateway and erp system.
    I can access the Fiori apps using the old launchpage screen - no problem, having assigned the relevant Catalog Pages to the relevant roles.
    I can access the new Fiori Launchpad and Launchpad Designer also no problem.
    However, and maybe my understanding is incorrect here - i was thinking i should see a number of standard catalogs for the standard fiori apps that i could manipulate and assign to groups etc as required.  Or this this incorrect?  I see nothing new in LPD_CUST - i would have thought there should be new entries here for the various apps to link to ?
    Or is it a case these all need to be created from scratch?  I have gone through the help documentation a number of times and cannot make out how to generate these even if i need to - exactly what the links between LPD_CUST and a new app within the catalog are.  I do have access within the designer to the tile templates but the help is not clear on how to link these to the standard fiori apps.
    Am i missing something in the set up?  is there further documentation available on the links required.
    Thanks
    Sinead
    Tags edited by: Michael Appleby

    Hi Michael,
      I don't know - In the help it references the following say, for Approve Requisitions:
    Front-End Components
    UI5 Application                                MM_PR_APV
    Business Role          SAP_MM_BCR_Buyer_X1
    Business Catalog       SAP_MM_BC_Buyer_X1
    Business Catalog Group
    SAP_MM_BCG_Buyer_X1
    LPD_CUST Role                         UIX01MM
    LPD_CUST Instance     TRANSACTIONAL
    But I see no reference to the above elements in my system.  I am just wondering are they missing, should they be there?  How do i get them there if they are missing and if not, how do i go about creating the require link for new tiles.
    Cheers
    Sinead

  • Integrating Apps into Fiori Launchpad/ Developing own Launchpad

    Hey guys,
    I am developing Fiori like Apps (4 Apps with related business background). I wanna give this apps a common frame. So I was thinking of start these Apps with a Launchpad.
    To do so I assume I have 2 opportunities:
    Place the custom App in the Fiori Launchpad
    Create a own Fiori like-Launchpad
    I dont't wanna mix custom Apps with Fiori Apps, so actually there is no need to setup the whole Fiori Launchpad (I guess its a lot configuration work etc.)
    Does anybody has experience with that? What are advantages/disadvantages? And does anybody has some links how to build a Fiori like-Launchpad.
    Thanks + regards
    Chris

    Hi Chris,
    You can define a tile for custom app in launchpad. Customers like single point of access for apps.
    SAP Fiori launchpad
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

    Hey Good Fellas,
    This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
    It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
    Ok, let's get down to the Business quickly, shall we?
    I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
    Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
    If you look around the SCN, you will probably hit across these threads and so did I.
    http://scn.sap.com/thread/3571448
    SAP Fiori - UI Add-on SP09 update troubleshooting
    With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
    With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
    Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
    Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
    So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
    I hope this is going to be a good take-away for others who are having Odata handling issues.
    The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
    Best Regards,
    Akshay

    Steve,
    If you still have the error, this is what I did to resolve mines.
    1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
    2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
    3) Copy that entire row in a notepad for all the fields
    4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
    5) Save and give that another try.
    This is what I exactly wrote in my solution as well.
    Akshay wrote:
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    A screen-shot perhaps helps you more.
    Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
    Let me know how that goes?
    -Akshay

  • How to access fragment in controller in ui5?

    Hello Folks,
                      i am using fiori design guidelines, so that i have used xmlview .now i want to access xmlview reference in controller.I have tried via sap.ui.getCore().byId(),but it is not working.
    Will you please guide on same to relsolve that?
    2) how to access fragment inside in xmlview  from controller also?
    Thanks,
    Ripu

    Hi Ripu,
    I also use a custom Google search which can help find results in SCN when the SCN search comes back with too many results or poorly ordered for your needs.
    https://www.google.com/cse/home?cx=013447253335410278659:k8ob9ipscwg
    Cheers, Mike
    SAP Customer Experience Group - CEG

  • Error while creating Catalog in Fiori Launchpad Designer

    Hi Experts,
    We have installed the new UIX* Fiori components on our NW 7.31 front-end server which has the gateway installed as well. Our backend ERP system is a separate system.
    I have activated the OData services /UI2/INTEROP and /UI2/TRANSPORT for the Fiori Launchpad Designer. I am acessing the Launchpad Designer with the URL http://<host>:<port>/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html. (I have activated the ICF service /sap/bc/ui5_ui5/sap/arsrvc_upb_admn).
    Now when I try to create a new Catalog (Standard type) by providing Title and ID I am seeing the below error message for POST operation in the PAGE_BUILDER_CUST service in Google Chrome browser:
    Our system components are as below:
    Can someone let me know how I can resolve this error so that I can create Catalogs in the Launchpad Designer?
    Regards,
    Saurabh
    Tags edited by: Michael Appleby

    Hi Saurabh,
    Please take a look troubleshooting steps.
    SAP Fiori LL17 - SAP Fiori launchpad troubleshooting
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Site's security certificate is not trusted - in fiori launchpad url

    Hi ,
    we are using HTTPS protocol in fiori launchpad , when the URL is opened in browser an error or warning comes up , it can be ignored by clicking
    proceeding anyway button. in Fiori client for mobile ( android or iOS ) its not showing the page due to this problem.
    our URL is a intranet URL ( within companies network ) how can we solve this problem , do we need to purchase any security certificate from some
    authority or some configuration is required ?
    Regards
    Yashpal
    Message was edited by: Michael Appleby

    The following may also be helpful .  Getting Started with Kapsel - Appendix D -- Security
    I hope to update this document and the associated Getting Started with Kapsel - Part 8 -- AuthProxy
    sections in the next week or two to demonstrate how to use OpenSSL to create a Certificate Authority and use the Certificate Authority to sign certificates.
    Regards,
    Dan van Leeuwen

Maybe you are looking for