How to access Infinity focus setting for video?

As per this post: http://talk.sonymobile.com/t5/FAQ/Capture-better-photos-in-low-light-conditions/m-p/395397#U395397
using the Infinity focus setting supposed to improve low-light video capability.
But I can't find it in my Xperia Z1 Camera App. It seems that article is a generic one and thus why I cannot find the same setting.
So how to set Infinity focus setting for the Z1?

The FAQ is general and available options can differ depending on what phone you have.
When using manual mode for video recording in Xperia Z1 you can select between Single auto focus, Face detection and Object tracking. Which one you should select depends on what your filming.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

How to access the BIOS setting for H330 to verify VT setting?

How to access the BIOS setting for H330 to verify VT setting?

Hello Rho2019 and welcome to community,
To enter into BIOS, Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I no longer want to merge my work laptop with my icloud account on other devices. How can I change the setting for the laptop?

I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?

Sign out of iCloud.

How can I see thumbnail pictures for Videos like I can see for Jpegs

How can I see thumbnail pictures for videos like I can see for Jpegs in Elements organizer.
Thanks
BillJa

You should get the mobile version of YouTube which sends Firefox a notice to open it in the YouTube App. That will have a much better playback experience than running Flash in the browser.

How do i change my setting for my fax on my hp officejet 6500 E710n-z

I cannot get a fax without being home to accept it
How do i change my setting for my fax on my hp officejet 6500 E710n-z, so that I can accept faxes no matter I am home or not please?
thank you
cookiez

Hi cookiesz219,
I found this in the user guide for HP Officejet E710n-z available here: http://h10032.www1.hp.com/ctg/Manual/c02519721.pdf
Could you try:
1. On the printer control panel, touch > Setup, then touch Fax Setup then Basic Fax Setup
2. Turn on Auto Answer
3. Set Rings to Answer to the number of rings.
I hope this helps.
I work for HP.

What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

How to change the account setting for App Store

My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
Thanks,

once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
it will look like it is doing nothing but give it time and it will sign you in with the new username.
is it possible you have multiple itunes accounts?
when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
be well

How to find the materials set for forecasting in APO..?

Dear Experts,
Could anyone please help me out in letting me know how to find the materials set for forecasting in APO, BY either using pegid or by using matid & locid combinations...? Please help me out ASAP as Iam severly stuck at one place.
Thanks in advance..
Regards,
Sanjay.

Hi Sanjay,
Please have a look at the table /SAPAPO/PEGKEY.
If u have any questions in APO goto the APO forum and raise ur doubts.
Thanks,
Siva.

How can i change the setting for audio-video for my face time to built in only so i can have my skype camera ?

Good evening,
The last few days my I lost the ability on Skype to be seen by the other party ... I can see them but they cannot see me. At the same time my Face Time sent me some messages error.
When I open my Skype and go to Preference and go to audio/video I see my image ... and when I go back to make a call the camera is off (no light). When I look at the bottom where I can have a drop down arrow I have Face Time (built in).
On my other Macpro (that work well) I have at the same place built-in only.
Cannot change anything on my MacBook air ... no drop in.
Please Help and thank you !

There are no settings for video resolution or frame rate.
Regarding iOS developer policies:
https://developer.apple.com/devcenter/ios/index.action

2 questions : How do I know if a video in Flash is streaming? 2nd - how can I make an overlay for video?

Two questions :
1) I have created a QT.mov, imported it into Flash, but after
thinking about it, I want to be sure it is streaming for the web.
How can I be sure of that? If it is not, what code can I put to
make sure it is loading?
2) How can I make an overlay for the video that disappears as
soon as the user clicks on the play button?

1. Without a flash ciommunication server for TRUE streaming
of the file, what you get is called Progressive streaming. This
means once the video begins to download it can start playing before
the file has completely downloaded to the user. There are good
descriptions (including pros and cons) of this here:
http://www.mediacollege.com/video/streaming/overview.html
2. If you have the file set to start automatically there will
be no need for the user to push the play button. You could just put
a graphic on top of the video component, and use actionscript to
make the graphic invisible when the play button is pushed.

How to create a value sets for concurrent program?

Hi Friends,
I am creating a concurrent program with a parameter period...
In the value set for the parameter period, I am using the following query :
---where application_id = 101
and set_of_books_id = :$PROFILES$.gl_set_of_bks_id
and closing_status IN ( 'O', 'F', 'C')
order by period_year, period_num' ----
In my cursor, i have a condition 'where set_of_books_id = ' ---
How can I pass the above set of books id into the cursor ?? it is not working when I am defining another parameter as Book and passing that value to the cursor....
I need that period parameter to return all the periods for the set of books where we are running the concurrent request from...I also need to get the set of books id for my cursor...
Hope I am making sense...All that I am trying is to have period parameter and also a SOB id in cursor condition...
Rgds,

Hi Vamsi /Nitin,
Let me explain the whole thing now.....
My plsql procedure is ......
CREATE OR REPLACE procedure GL_INT(
     perrbuff     out varchar2,
     pretcode     out varchar2,
pbook          in varchar2,
pperiod          in varchar2
     ) is
cursor cur1 (p_sdate in date, p_edate in date )is
select distinct group_id groupid,
user_je_source_name source
from gl_interface
     where accounting_date >= p_sdate
and accounting_date <= p_edate
and set_of_books_id = pbook;
cursor cur2 is
select distinct start_date sdate,
     end_date edate, period_name period
from gl_period_statuses
where      period_name = pperiod
     and set_of_books_id = pbook
     and application_id = 101;
i               cur1%rowtype;
j               cur2%rowtype;
begin
open cur2;
               fnd_file.put_line(fnd_file.output,'PERIOD'||'----'||'GROUPID'||
                                   '----'|| 'SOURCE');
          loop
               fetch cur2 into J;
exit when cur2%notfound;
               open cur1(J.sdate,J.edate);
               loop
          fetch cur1 into I;
                    exit when cur1%notfound;
          fnd_file.put_line(fnd_file.output, J.period||'----'||I.groupid||'----'||
                              I.source);
               end loop;
          end loop;
     Close cur1;
close cur2;
Exception when others then dbms_output.put_line(SQLERRM);
end;
==================================================================================================
For SOB value set, I have passed the default value as vamsi suggested ($profiles$.gl_set_of_bks_id)....
For period value set, I have entered query as ..where application_id = 101
and set_of_books_id = :$PROFILES$.gl_set_of_bks_id
and closing_status IN ( 'O', 'F', 'C')
order by period_year, period_num...................
It still doesn't work....I don't know how to derive those Periods based on the SOBs and at the same time pass SOB id into the cursors...
Please help...
Rgds,
Murali

How can I save zoom setting for a DOCUMENT so it opens at that setting?

I find an optimal zoom setting for a document I'd like to use (say 42%) and want the document to open at that setting. I save the document with File>Save Copy. However when I open the document, it opens at the DEFAULT zoom setting set in the Preferences for program. If I change the zoom level here to what I desire for that document, obviously all documents will open at that default setting.
How can I save my desired zoom level for a document, which will most likely be different for EACH document, and have the saved document open at that setting?
This seems like a trivial exercise / feature that should be easy to implement BOTH by the programmers of the software and the user setting the zoom level.
Also, I want to suppress the bookmarks sidebar. I save without the bookmarks but the documents opens with the side bar. Can't THIS be set for each document?
Why is it so difficult to tailor the viewing of a document to exactly what the viewer wants?

OK. Sorry for the mistake in posting the question here.
Again it seems like it should be trivial to save a document in the Reader with a viewer's desired zoom setting. I find this very helpful as I like to use a zoom setting that when scrolling down the document only one full page of the document is viewed (like turning the pages of a book). Without this feature, partial pages are displayed when scrolling unless one experiments to find the correct zoom setting (often it is 60%). One must do this every time one opens the same document, unless one remembers the zoom setting.
Oh well ....

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

How to use same RESULT SET for two different events

hello friends,
I need to use same result set for two different events. How to do it.
here My code,
private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
// TODO add your handling code here:
try
String selstate,selitem;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
selstate="select * from tab_places where state=?";
PreparedStatement ps=con.prepareStatement(selstate);
ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
ResultSet rs=ps.executeQuery();
if(rs.next())
jTextField1.setText(rs.getString("place_ID"));
jTextField2.setText(rs.getString("place_name"));
jTextField3.setText(rs.getString("category"));
byte[] ba;
ba=rs.getBytes("image");
ImageIcon ic = new ImageIcon(ba);
jLabel6.setIcon(ic);
in=true;
catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
} how do i get dat resultset,
help me out

One post wasn't enough?
{color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
db

How to understand which BC set for Object BUS 2121 has to be used.

hi,
How do we understand this,
If i have a BO BUS 2121 - then how do i know which BC set has to be used. and wht would be the suitable BC Set for my reuirement .
On what basis would i come to know that what would be the prefered BC set for this.
Kindly suggest me with some solution or suggestion
Thanks,
shankar

Hi,
BCSet is just sample configurations for your quick system setup. You can learn process level definition setting from sample BSSet configuration and copy/enhance it for customer scenario.
For BUS2121, there are 3 BCSet are available.
/SAPSRM/C_SC_600_000_SP04 Shopping Cart Without Approval
/SAPSRM/C_SC_600_001_SP04 SHopping Cart with One-Level Manager Approval
/SAPSRM/T_SC_600_000_SP04 Test Workflow Settings: Shopping Cart ( Several samples )
Regards,
Masa

How to access Infinity focus setting for video?

Similar Messages

Maybe you are looking for