How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

Similar Messages

How to access(connect) BI Data in webdynpro for java applications

Hi ,
is there any way to access and display the BI data in portal using webdynpro for java applications like we did in Visual composer.
if not how to integrate the BI data in webdynpro applications ?
Regards,
Govindu

Hi,
Yes there are ways to do it. But may your scenario and the scenario for which I have done may differ.
You can use openhub to get the data in a flat file and then read it into weddynpro through a java service OR
You can use DBlink(which i have done).
Please refer the link below:
[Link|Data from BW to Oracle.;
This I have done in NW04s. Not sure whether a better solution is available in the newer release.
Hope it helps.
Regards,
Manoj

How to pass internal table data from model to BSP page.

Hi Experts,
I have requirement where I have got data from deep structure in Model.
The structure has two fields > 1. normal data tyoe + the other one is of table type.
Thanks and Regards,

if you have defined the attribute then you can ABAP coding to use it in BSP.
for eg, here i am looping the intenal table and passing the data to list item box.
    <%
LOOP AT lt_dyn_uom INTO wa_dyn_uom.
    %>
            <htmlb:listBoxItem key   = "<%= wa_dyn_uom-name %>"
                               value = "<%= wa_dyn_uom-value %>" />
     <%
ENDLOOP.
     %>
Thanks,
Chandra

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to Populate Internal table data to Table Control in a Report Program

Dear All,
       How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph Reddy

If you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
       no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
            into corresponding fields of table imara
              from mara
               inner join makt
                 on mara~matnr = makt~matnr
                    where mara~matnr in s_matnr
                      and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat = fieldcat
       tables
            t_outtab    = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos    = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos    = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman

How to convert internal table data to PDF format

HI,
I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to convert internal table data to PDF format.
Kishore

In which format is your data in the internal table currently. Is it returned by a smartform/script or its just data fetched from some database table into an internal table. Since its obvious that the data should appear in the PDF with some Layout, you should be using smartform to format the data properly. See the Link
Smartform to PDF to EMAIL
This shows convertion of smartform to pdf and send it through email
Regards,
Abhishek

How to transfer internal table data to Applicatiion Server in XML fromat.

how to transfer internal table data to Applicatiion Server in XML fromat.

Hi if u want to transfer from to application server using xml in
do like this,
v_xml_table is u r internal table,
and define li_xml_table as line of u r internal table
OPEN DATASET g_file FOR OUTPUT IN BINARY MODE .
    LOOP AT v_xml_table INTO li_xml_table.
      TRANSFER li_xml_table TO g_file .
    ENDLOOP.
    CLOSE DATASET g_file.
ENDIF.
<removed_by_moderator>
Regards,
Prasad.
Edited by: Julius Bussche on Jul 16, 2008 2:43 PM

How to Convert internal table data into text output and send mail in ABAP

Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VT

here's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
*     -------- create persistent send request ------------------------
       gv_send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document -------------------------------
*     create text to be sent
       wa_line = text-001.
       APPEND wa_line TO gt_text.
       CLEAR wa_line.
       APPEND wa_line TO gt_text.
       LOOP AT gt_fail ASSIGNING <fs_fail>.
         MOVE <fs_fail>-retry_count TO gv_count.
         CONCATENATE text-002
                     <fs_fail>-setting_id
                     text-003
                     gv_count
                     INTO wa_line SEPARATED BY space.
         APPEND wa_line TO gt_text.
         CLEAR wa_line.
       ENDLOOP.
       APPEND wa_line TO gt_text.
       wa_line = text-007.
       APPEND wa_line TO gt_text.
*     create actual document
       gv_document = cl_document_bcs=>create_document(
                       i_type    = 'RAW'
                       i_text    = gt_text
                       i_length = '12'
                       i_subject = 'Failed Precalculation Settings!' ).
*     add document to send request
       CALL METHOD gv_send_request->set_document( gv_document ).
*     --------- set sender -------------------------------------------
       gv_sender = cl_sapuser_bcs=>create( sy-uname ).
       CALL METHOD gv_send_request->set_sender
         EXPORTING
           i_sender = gv_sender.
*     --------- add recipient (e-mail address) -----------------------
       LOOP AT s_email INTO wa_email.
         MOVE wa_email-low TO gv_email.
         gv_recipient = cl_cam_address_bcs=>create_internet_address(
                                           gv_email ).
         CALL METHOD gv_send_request->add_recipient
           EXPORTING
             i_recipient = gv_recipient
             i_express   = 'X'.
       ENDLOOP.
*     ---------- set to send immediately -----------------------------
       CALL METHOD gv_send_request->set_send_immediately( 'X' ).
*     ---------- send document ---------------------------------------
       CALL METHOD gv_send_request->send(
         EXPORTING
           i_with_error_screen = 'X'
         RECEIVING
           result              = gv_sent_to_all ).
       IF gv_sent_to_all = 'X'.
         WRITE text-004.
       ENDIF.
       COMMIT WORK.
*   exception handling
     CATCH cx_bcs INTO gv_bcs_exception.
       WRITE: text-005.
       WRITE: text-006, gv_bcs_exception->error_type.
       EXIT.
   ENDTRY.
with the following declarations
* TABLES                                                               *
TABLES:
   adr6,
   rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS                                         *
DATA:
   gt_fail          TYPE SORTED TABLE OF rsr_prec_sett
                         WITH UNIQUE KEY setting_id run_date,
   gt_text          TYPE bcsy_text,
   wa_fail          LIKE LINE OF gt_fail,
   wa_line(90)      TYPE c.
FIELD-SYMBOLS:
   <fs_fail>        LIKE LINE OF gt_fail.
* VARIABLES                                                            *
DATA:
   gv_count(4)      TYPE n,
   gv_send_request TYPE REF TO cl_bcs,
   gv_document      TYPE REF TO cl_document_bcs,
   gv_sender        TYPE REF TO cl_sapuser_bcs,
   gv_recipient     TYPE REF TO if_recipient_bcs,
   gv_email         TYPE adr6-smtp_addr,
   gv_bcs_exception TYPE REF TO cx_bcs,
   gv_sent_to_all   TYPE os_boolean.
* SELECTION-SCREEN                                                     *
SELECT-OPTIONS:
   s_email          FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
   wa_email         LIKE LINE OF s_email.

How to download internal table data into xml file?

Hi,
Experts,
I have downloaded internal table data into XLS format using GUI_DOWNLOAD Function module, But i didn't Know how to download internal table data into XML format please post some ideas/inputs on this issue.
Thank you,
Shabeer ahmed.

check this
data : gd_repid type sy-repid.
GD_REPID = SY-REPID.
DATA : L_DOM TYPE REF TO IF_IXML_ELEMENT,
       M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
       G_IXML TYPE REF TO IF_IXML,
       W_STRING TYPE XSTRING,
       W_SIZE TYPE I,
       W_RESULT TYPE I,
       W_LINE TYPE STRING,
       IT_XML TYPE DCXMLLINES,
       S_XML LIKE LINE OF IT_XML,
       W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
      BEGIN OF XML_TAB OCCURS 0,
      D LIKE LINE OF XML,
      END OF XML_TAB.
data : l_element           type ref to if_ixml_element,
       xml_ns_prefix_sf     type string,
       xml_ns_uri_sf        type string.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
   NAME = 'REPAIRDATA'
   DATAOBJECT = IT_FINAL_LAST1[]
IMPORTING
   DATA_AS_DOM = L_DOM
CHANGING
   DOCUMENT = M_DOCUMENT
EXCEPTIONS
   ILLEGAL_NAME = 1
   OTHERS = 2.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
*Start of code for Header
* namespace
t_mnr = sy-datum+4(2).
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
    LANGU         = 'E'
    MONTH         = t_mnr
IMPORTING
   T247          = wa_t247
concatenate sy-datum+6(2)
            wa_t247-ktx
            sy-datum(4) into t_var1.
concatenate sy-uzeit(2)
            sy-uzeit+2(2)
            sy-uzeit+4(2) into t_var2.
clear : xml_ns_prefix_sf,
        xml_ns_uri_sf.
l_element = m_document->get_root_element( ).
xml_ns_prefix_sf = 'TIMESTAMP'.
concatenate t_var1 t_var2 into xml_ns_uri_sf separated by space.
clear : t_var1,
        t_var2,
        t_mnr,
        wa_t247.
l_element->set_attribute( name = xml_ns_prefix_sf
                          namespace = ' '
                          value = xml_ns_uri_sf ).
clear : xml_ns_prefix_sf,
        xml_ns_uri_sf.
xml_ns_prefix_sf = 'FILECREATOR'.
xml_ns_uri_sf    =   'SAP'.
l_element->set_attribute( name = xml_ns_prefix_sf
                          namespace = ' '
                          value = xml_ns_uri_sf ).
clear : xml_ns_prefix_sf,
        xml_ns_uri_sf.
xml_ns_prefix_sf = 'CLAIMGROUP'.
xml_ns_uri_sf    = '1'.
l_element->set_attribute( name = xml_ns_prefix_sf
                          namespace = ' '
                          value = xml_ns_uri_sf ).
clear : xml_ns_prefix_sf,
        xml_ns_uri_sf.
xml_ns_prefix_sf = 'CLAIMTYPES'.
xml_ns_uri_sf    = 'W'.
l_element->set_attribute( name = xml_ns_prefix_sf
                          namespace = ' '
                          value = xml_ns_uri_sf ).
*End of Code for Header
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
*Start of Code for File name
concatenate p_file
            '\R'
            '000_119481'
            sy-datum+6(2) sy-datum+4(2) sy-datum+2(2)
            sy-uzeit(2)   sy-uzeit+2(2) sy-uzeit(2) '.xml' into p_file.
*End of Code for File name
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = p_file
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC = 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to save internal table data to file on local disk from smartforms?

Hi there,
I'm trying to save internal table data into .csv file on presentation server from within smartforms using GUI_DOWNLOAD function.
This function works fine from abap program, but when I call it from smartforms it does nothing. Form prints ok and there is no file created on local dick.
Is there a way to save smartforms internal table data to local disk?
Thanks in advance,
Baske

Hi Jey,
Thanks for your prompt replay.
Unfortunately, Iu2019ve tried both your suggestions without success. Smartforms behaves just like in case of GUI_DOWNLOAD. There is no file saved on disk.
Do you have any other idea?
BR,
Baske

How to send internal table data through mail from report in foreground

hi all,
iam trying to convert the internal table data into excel format and sending it through mail by runnning the report in foreground.
mail is going sucessfully with excel format,but iam facing the problem in the excel format of the material column as follows:
the matrno shows the wrong format -2.63E+11 instead of displaying correct format-263215000000.
Pls suggest the alternative process for the above mentioned problem.
Thanks,
Sivagopal R.

Hi Siva,
Try to copy 263215000000 in one of the cells of excel sheet and press enter.It will automatically convert into -2.63E+11 .
This means the default formatting of the excel sheet makes this happen.If you convert the format of the cell to "NUMBER" then u will get the required result.
But I doubt whether or not it is possible through ABAP programming.
Regards,
Vimal.

How to Convert internal table data into xml and xml data into internal tab

Hi Guys,
I have a requirement that i have to convert the internal table data into xml format and viceversa . for my requirement i came to know that i have to use Transformations concept. i done the converting the data from internal table into xml data by using standard Tranformations. My Question is
1) Can i use same Transformation to convert the xml data into abap internal table. if it is possible then how ???
2) Is it possible using the standard Transformation or I have to go for XSLT approach
Please help me out from this guys,
Thanks and Regards
Koti

Hi Koti,
This is possible. There is a link. With the help of this link you can convert ABAP data to XML and vice versa.
Link: http://www.heidoc.net/joomla/index.php?option=com_content&view=article&id=15:sapxslt&catid=22:sap-xslt&Itemid=31

Internal table coming from webdynpro to adobe forms

Hi friends,
    I am developing one interactive form , In this i have to send one internal table data which is available in view context to interactive form but while designing the layout of the form that table is coming as a structure.how can i solve this problem ?
Please give your suggestions.

Hi,
sudheer b
    I am not able to understand your scenario properly but i can give you some exposure about the cardinality of any node.
If you create a node in COMPONENTCONTROLLLER or in VIEW you have to set the Cardinality of the node.
There are four option
A.   1u20261        Only one element is instantiated.
B.    0u20261        At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
           If you ahve taken like above those then when you call the node from your code wizard you will get it like a structure.
Check also you will not been able to select as a table opeation.
C      1u2026n        n elements can be instantiated, but at least one element must be instantiated.
D.     0u2026n        The number of instantiated elements of the context node can vary.
           In the above case you can call the node as a table operration from your code wizard.
Check the below link:-
       [http://help.sap.com/saphelp_dm40/helpdata/en/7a/787e40417c6d1de10000000a1550b0/content.htm]
Reply if you need any further clarification.

How to write internal table data vertically . Records vertically.

Hi pals,
      How to write internal table records vertically .
suppose the records are
a1 a2 a3
b1 b2 b3
we need to display
a1 b1
a2 b2
a3 b3
Thanks in advance.
balaji.T

Just check the code
DATA: BEGIN OF itab OCCURS 0,
        f1 TYPE i,
        f2 TYPE i,
        f3 TYPE i,
      END OF itab.
DATA pos TYPE i.
"Define your lines where you want to print here...
DATA line1 TYPE i VALUE 10.
DATA line2 TYPE i VALUE 12.
DATA line3 TYPE i VALUE 14.
itab-f1 = '1'.
itab-f2 = '10'.
itab-f3 = '100'.
APPEND itab.
itab-f1 = '2'.
itab-f2 = '20'.
itab-f3 = '200'.
APPEND itab.
itab-f1 = '3'.
itab-f2 = '30'.
itab-f3 = '300'.
APPEND itab.
itab-f1 = '4'.
itab-f2 = '40'.
itab-f3 = '400'.
APPEND itab.
loop at itab.
write : / itab-f1,itab-f2,itab-f3.
endloop.
LOOP AT itab.
pos = pos + 10.
SKIP TO LINE line1.
POSITION pos.
WRITE itab-f1.
SKIP TO LINE line2.
POSITION pos.
WRITE itab-f2.
SKIP TO LINE line3.
POSITION pos.
WRITE itab-f3.
ENDLOOP.

How to access Sybase IQ data from SAP BW

Hi,
I read from Sybase website that we can access Sybase IQ data from SAP BW using Remote Cube through JDBC driver.
Is there any documentation on how to configure that?
Thanks in advance for your help.
Our BW version is 7.01
Sybase IQ is 15.4
Thanks,
CH

Hi,
The two files that are created are one is Control File ( will save as filename_s ) and other is data file. The control file will give you the details of your fields in your Infospoke
regards
Srini
Message was edited by:
Srinivas

How to access internal table data from webdynpro to Flex application.

Similar Messages

Maybe you are looking for