How to access Internet through proxy server

Please help... I cannot get Internet access through a proxy server at work.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Cannot access server in HQ through proxy server

Hi Experts,
We have a TMG 2010 installed and clients are accessing Internet through it.
And now there is an access problem to the destinatined server in HQ in another country, and it was fine to reach the destinated server before the servere changed its IP.
When trying to accesss the destinated server with new IP, the TMG log and report shows the connection status with
12030: The connection with the server was terminated abnoramlly.
While there is another guest segment that allows Internet access without proxy server, and they are able to access the server with no problem at all.
When I captured packets using Wireshark from the pc and found that the connection was actually from the pc to proxy server with the following result:
from PC to Proxy server
CONNECT xxx.xxx.com:443 HTTP/1.0
from Proxy server to PC
HTTP/1.1 502 Proxy Error (The connection with the server was terminated abnormally) (text/html)
Would there be a configuration problem inside TMG?
When i include the domain in https inspection exemption list, is that means client would be able to reach ther destination without being inspected?
Then how about the incoming connection? Is there any rules which will restrict HTTPS inbound?
Apart from above problem, clients also not able access some of https website such as banking with CA's, and no problem using guest segment (not through proxy server).
Thanks in advance
Ben

Hi,
>>And now there is an access problem to the destinatined server in HQ in another country, and it was fine to reach the destinated server before the servere changed its IP.
Have you tried to re-create the rule to access the destinatined server after it changed the IP?
>>When i include the domain in https inspection exemption list, is that means client would be able to reach ther destination without being inspected?
When a site is added to the HTTPS inspection exclusion list, Forefront TMG does not check the site’s certificate for expiration or revocation. However, name mismatch and trust are always checked, unless the “No Validation” mark is set.
Reference:Troubleshooting HTTPS inspection
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Accessing WS Service through proxy server

Working with WLS 8.1.4 i cannot access remote service through proxy server.
I have setted up everithing needed and more:
http.proxyHost=HOST
http.proxyPort=8080
http.proxyUser=WIN_DOMAIN\USERNAME
http.proxyPassword=PASSWORD
http.agent="Microsoft Internet Explorer 5.0" weblogic.net.proxyAuthenticatorClassName=MyProxyAuthenticator
weblogic.webservice.transport.http.proxy.host=HOST
weblogic.webservice.transport.http.proxy.port=8080
weblogic.webservice.client.proxyusername=WIN_DOMAIN\USERNAME
weblogic.webservice.client.proxypassword=PASSWORD
weblogic.webservice.verbose=true
weblogic.webservice.binding.verbose=true
weblogic.webservice.transport.http.full-url=true
The strangest thing is that apparently no MyProxyAuthenticator is instantiated for I cannot see a System.out.print(message) I wrote its init() method.
Please help ... thanks in advance.

I am having the same problem. My client has the exact same properties as the previous poster:
// Standard JDK Properties
System.setProperty("http.proxyHost", "proxy-cache.xxxxx.xxx");
System.setProperty("http.proxyPort", "9119");
System.setProperty("http.proxyUser", "username");
System.setProperty("http.proxyPassword", "password");
System.setProperty("http.agent", "Microsoft Internet Explorer 5.0");
// Specific Weblogic properties
System.setProperty("weblogic.net.proxyAuthenticatorClassName", "com.bcbsmn.webservices.authentication.ProxyAuthenticatorImpl");
System.setProperty("weblogic.webservice.transport.http.proxy.host", "proxy-cache.xxxxx.xxx);
System.setProperty("weblogic.webservice.transport.http.proxy.port", "9119");
And here is part the response I get from the proxy server:
[java] <BODY>
[java] <H1>ERROR</H1>
[java] <H2>Cache Access Denied</H2>
[java] <HR noshade size="1px">
[java] <P>
[java] While trying to retrieve the URL:
[java] <A HREF="......">http://................
ITestPricer</A>
[java] <P>
[java] The following error was encountered:
[java] <UL>
[java] <LI>
[java] <STRONG>
[java] Cache Access Denied.
[java] </STRONG>
[java] </UL>
[java] </P>
[java] <P>Sorry, you are not currently allowed to request:
[java] <PRE> http://...............</PRE>
[java] from this cache until you have authenticated yourself.
[java] </P>
...and my authentication impl is never called according to my println's. I tried adding the proxyAuthenticatorClassName property to the command line as a JVM arg with no luck. Please help if you can, thanks.
Matt Dowell
Blue Cross Blue Shield

Re: (forte-users) HTTP request through proxy server

Daniel -
No, it does not. ;)
How do you say to HTTPRequest to go through proxy?
Thanks,
Taras
Daniel Nguyen wrote:
>
Hi,
It works very well. I have experienced this model for a distant Forte client
calling a Forte Server service Object for instance without any environment
and without TCP access (passing through firewall for instance).
It has also worked very well to make an injectot to improve Web Enterprise
and IIS using the SendRequest from HTTPAccess.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Taras Katkov a écrit:
HTTP request through proxy server using forte HTTP library?
Any experience?
Thanks,
Taras
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

You can also use the HTTP-DC project.... You don't
need Web Enterprise for this. From what I can tell,
this is available in L.x on....
There is api documentation in M.2 (with scant
examples.)
There's a special process to put the project in your
repository (it isn't installed in the repository in
the standard install,) the documentation in M.2
(probably in M.0 too, AFAIK) that tells you how to do
this (look for HTTP-DC in the online help.)
I haven't done much with it yet, I've just installed
it. If anybody out there has examples, that'd be
great. I'll try to contribute more the moment I get a
chance to explore it....
Christopher Fury
BellSouth Communications Systems
--- Daniel Nguyen <dnguyenclub-internet.fr> wrote:
Hi,
If you have Web Enterprise, you can user
HttpAccess.SendRequest().
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Amin, Kamran a écrit:
Is there any way to make a HTTP request from TOOLto another HTTP Service?
thanks in advance.
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

Problems with accessing Internet through router (permanent IP)

Hi.
I changed hostname with sys-unconfig. Now computer has permanent IP address (non DHCP) and right hostname.
Before this change I had access to Internet (hostname: "unknown" and DHCP).
My computers access Internet through router.
There is ping from my computer to router and another computer. Also other computer pings my computer.
In DHCP tables my computer does not exist.
I created file /etc/defaultrouter with IP of my router.
Trying to access Internet, web browser (Mozilla) writes: "<site.com> could not be found. Please check name and try afain."
I think there is a problem with DNS.
How to configure my computer on Solaris 10 to access the Internet with current configuration?
Thank you.

To test DNS services without a browser (ie, to see if the
system can be a DNS client), first use the command
'nslookup'
# /usr/sbin/nslookup sun.com
Server: miki-class-gla.eclecticgroup.co.uk
Address: 10.23.0.1
Non-authoritative answer:
Name: sun.com
Address: 72.5.124.61
# /usr/sbin/nslookup google.com
Server: miki-class-gla.eclecticgroup.co.uk
Address: 10.23.0.1
Non-authoritative answer:
Name: google.com
Addresses: 64.233.167.99, 64.233.187.99, 72.14.207.99
If this doesn't work, then your system isn't talking to a
DNS server at all at all, so you need to check the contents
of /etc/resolv.conf.
If it does work, use the command 'getent' to check that your
system as a whole is querying DNS for name-IP resolution.
EG.
# getent hosts sun.com
72.5.124.61 sun.com
# getent hosts google.com
64.233.187.99 google.com
72.14.207.99 google.com
64.233.167.99 google.com
If you don't get back IP addresses, your system isn't
correctly configured as a DNS client.
Look at /etc/nsswitch.conf, and find the line
that starts 'hosts'.
If it says
hosts files
then the system is not a DNS client.
To correct this, edit that line to add the word dns on the end:
hosts files dns
That's it. No need to reboot.

Help needed for CORBA over Http through proxy server[Very Urgent]

Hi Friendz,
I am new to J2EE. Right now I am learning RMI, Corba now.
In RMI, to pass through Http to bypass firewall or through proxy sever, we can use either Http to port or Http to CGI/Servlet i.e., Http tunneling.
In the same, I am running a simple corba application, i want my corba application to pass through my proxy server using http which is configured to address 127.0.0.1 and port 8118.
How to pass my corba application through proxy server. please help me and it is very urgent.
Is it possible or not, please let me know some comments about this topic
Thanks in advance Friends for your help

This is so extremely urgent that it needs to be asked multiple times.
http://forum.java.sun.com/thread.jspa?threadID=762950

Connect to Internet use proxy server (N82/WLAN)

I can not connect my N82 to Internet use proxy server

15-May-2008 09:10 AM
duchung91 wrote:
I can not connect my N82 to Internet use proxy server
Hi I have had the same problem but think I've cracked it with the help of the IT guys at work.
Steps:
1)Goto Wifi wizzard,
2) find the network you want to connect to.
3) Click on options
4) click on 'define as access point'
5) enter the key when prompted. Go back to main screen.
6)Now goto tools, (from main screen), settings, connection, access points.
Find your network, click on options and then edit. Check your details are correct.
7)Click on options, advanced settings. Type in your proxy address and port number. Get back to the main screen.
8)Click on the web icon. Find your network. You might have to scroll past the standard gprs networks.
9) Surf (hopefully).
This worked for me. I hope it will for you too. Not an expert but just determined.
Dan

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

How to run internet through Network provider conne...

Hi i want to know how to run internet through netwok provider?
I tried but not got anysolution it asking for WIFI only

i have those settings but after i gave mobileto reinstall the firmvare software to NOKIA CARE, and now its not asking
i have good service provider, on any mobile i insert sim the sim automatically sends messeage gets its settings and asks to install that settings
But now its not asking on My N97 it means i already have butnot asking to choose
I am using DOCOMO
Message Edited by dbzbux on 29-Oct-2009 06:55 AM

Adding Pix device public interface through Proxy server into CSM Fails

Hi
I am trying to add a device into CSM. The device is only reachable through proxy server. If i try to add the device, the connectivity test fails" unable to communicate with device". If i debug on the PIX i see no connection attemps. If imake a https connection from the Explorer from the windows server running CSM i get connected. I have set the proxy settings under Server Administration. I can update packages from CCO through the proxy. Is there somewhere else to tell CSM to run through proxy ?

Hello,
maybe your problem has to do something with loading SLPDA.NLM. If you
cannot get to open Autoexec.ncf then go back to DOS-Mode, rename this
file in C:\nwserver-directory and start again. i have seenthis behaviour
on servers loading SLPDA with no network-communication and they stop
loading at WPSD.NLM. Try to load SLPD.NLM manually when the server is
up. After that shift the line in Autoexec.ncf where you want to load
Slpda.NLM to the end of the file and boot the server again to see what
happens.
Good luck
Burkhard Wiegand
Netware Admin
Debeka-Versicherungen
D-56068 Koblenz

Mac Appstore not working through proxy server

I use net through proxy server of my college(lan). My Appstore doesnt work on it. it keeps blinking or shows "cannot connect to appstore". GoogleChrome and other apps are working fine. Also, appstore worked at my home where i use wifi.

That's right. It doesn't work through a proxy.

Applet using socket connection always go through proxy server

Socket connection with socks always go through proxy server
We have two applets in different codebases using socket to talk to each other, until now nothing new, but the problem is that we are behind a proxy server with socks and because of that, the connection always go through the proxy server even with proxy override point to the applet machine. We have tried a lof of things and until now nothing worked, it looks like the socket is ignoring proxy override configuration. We would like to know if there is a way to solve this problem making the applets comunicate to each other ignoring the proxy server. It should happen when we set the plug-in option to "no proxy host", but it doesn't. Maybe it can be a bug of JVM, I don't know, just maybe, and if it's true, any other good idea would be welcome as well.
Thanks in advance.

Hi,
I am not very much sure if I can help you. In my previous experience, once you set the system property to use the proxy, then the jvm uses the proxy. If you want disable, in your code, you have to disable it.
like System.setProperty("socksProxyHost","someHost"), Properties props = System.getProperties(); props.remove(("socksProxyHost");

Juniper Secure Access Pass Through Proxy?

Has anyone tried to enable external access to Filr via a Juniper Secure Access Pass Through Proxy?
Cheers
David

djbrightman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

How can we allow internal users to access internet through ASA firewall?

Hello,
I am new to security track, i have been asked to setup lab and allow users from inside firewall to access internet. here is my lab setup
PC -> switch 1 (layer2) -> (inside) ASA (outside) -> switch 2 (Layer2) -> Router
does switch 2 port needs internet access through router?
what configuration required on ASA to allow users behind the firewall to access internet?
any help on this would be much appreciated.
thanks,

Hi,
Okay , can you clarify on this for me. Are you able to ping the internet from the ASA outside interface ?
Just try something like this:-
ping 4.2.2.2 .. Does this work ?
If this does not work , then i think the ASA even is not able to get to the internet and that would be a problem on the router.
Also , internet from Switch 2 is not a requirement as that is only a Layer 2 device.
You can assign the ISP allocated address on the PC , connect it to the Switch 2 port and then try to ping something on the internet or surf internet and i think that should work.
Thanks and Regards,
Vibhor Amrodia

Traffic move through Proxy Server in Production

Hello,
                                                                                        Internet
                                                                                              |
                                                                                      Internet Router
                                                                                              |
                                                                                      Internet switch
                                                                                              |
                                                                                           IPS
                                                                                              |
                                                                                           Firewall
                                                                                              |
                                                                                           IPS
                                    Inside ()---- Access-sw----------Core-SW------------DMZ
This is my Company network diagram, all data go through the firewall IPS is Inline mode on Acess and Core sw static route is configured for firewall but management wants all inside (Noc Room Helpdesk Team and Third Party members) traffic must pass via Proxy server that is connected to Core switch Please anybody tell me How can i do this in a Production Enviornment and which type of changes i need to do on Access or Core Switch.They will use Squid for Proxy on Linux Server

WCCP can be used to redirect traffic to the proxy server. See below a configuration example:
http://www.crypt.gen.nz/papers/cisco_squid_wccp.html
Don't forget to rate all posts that are helpful by clicking on the stars below.

How to access Internet through proxy server

Similar Messages

Maybe you are looking for