How to access layer pixel data?

I am new to the Adobe CS extension SDK.
Is it possible to access image data from an extensions as an array?
In the API reference I did not find anything like that.

What app?
The CS SDK is not much more than a proxy for the scripting interface and a way of building UIs around that.
You'd get image data the same way you'd do it with classic ExtendScript scripting.
Harbs

Similar Messages

  • How to access the global data in user exit.

    Hi All,
    How to access the global data in user exit.
    the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
    this document number is not imported to the FM i needed to access for frther proceed.
    Thanks in advance.

    Hi,
    See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
    [SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
    This will help you to solve your problem.
    Regards
    Karthik D
    Edited by: Karthik D on Dec 2, 2008 4:18 PM

  • How to access internal table data from webdynpro to Flex application.

    Hi Connoisseur
    The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and  Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
    There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
    i tried to do pass internal table value  to flex-datagrid.but its not work.
    i would like to know
    1.how to access internal table data from webdynpro to Flex application.
    2.how to pass the internal table to flex-datagrid.
    2.how to pass dynamically in ADOBE flex.
    3. how to do Flex is receiving the wd context data?
    4. how can we update WD context with FLEX data.
    Ple give me sample example and step by step procedure.
    Regards
    laxmikanth

    Hi Laxmikanth,
    Please refer this...
    Flash island: update complex type from flex
    Cheers..
    kris.

  • How to get the pixel data so as to work on it?

    Hi all,
    I am trying to write a plug-in that will crop and scale the image, edit the selection in the image document based on image data. For this purpose I need the pixel data of the image. How to get the image data as different pixels and what is the data structure used to store this data?
    Assumption: No layers i.e., only background
    Thanks in advance,
    Sailu

    Hi Ilya,
    Thank you for your post. In the plugin architecture you propose (automation + filter), do you have an idea about how to share the pixel data between the two plugins? I have found a post that gives details about how to get pixel data and show it using ADM components
    Matthew Hollingworth, "ADM Color Managed Preview?" #1, 22 Oct 2007 11:53 pm but it supposes that you have a filter plug-in.
    Again, does anyone knows how to preview the current image in a AUTOMATION plug in? This seems impossible.
    Thank you all for your help
    Cheers,
    Chaker

  • How to access the Custom Data type variable given in Expression edit control To and From LabVIEW

    Hello, I would like to know how to access the custom data type variable given in the Espression Edit Control from LabVIEW and vice-versa
    Say, the FileGlobals.Reference_Handle (Custom Data Type Variable) contains the
    VISA I/O session (Which in turn contains VISA_DeviceName: String, Session: Number),
    Channel1: Number and
    Channel2: Number
    I am expecting the user to give FileGlobals.Reference_Handle as the input at the ExpressionEdit Control in the edit screen of the VI Call.
    I would like to know how to get the values of this custom data type to LabVIEW?
    Say, if I have the Cluster in LabVIEW like VISA I/O session (Deive Name and Session Number), Channel1 and Channel2
    how do i need to set this cluster to the Custom Data type variable in TestStand?
    Thanks and Regards
    Prakash 

    Hi,
    TestStand to LabVIEW: i didnt understand what you r trying to achieve. But if you are using references, Use Property nodes and Invoke nodes to achieve what you want in LabVIEW.
     LabVIEW to TestStand: check the image below: You need to click the button next to 'container'. I have used a cluster output in the VI.
    Hope this helps
    .......^___________________^
    ....../ '---_BOT ____________ ]
    ...../_==O;;;;;;;;_______.:/
    Attachments:
    1.JPG ‏187 KB

  • How to access individual pixels in a frame...

    Hi there,
    I am newbie in java and i basically want to know how to access individual pixels in the frame so that i can change the RGB color values of some definite block of pixels. I did have a look at the RotationEffect java example at
    http://java.sun.com/products/java-media/jmf/2.1.1/solutions/RotationEffect.html but couldnt get much information from that.....If anybody has some information on this pls lemme know at the earliest...Regards, Kunal

    The source code examples at http://www.exactfutures.com/index02.htm may help.

  • How to access(connect) BI Data in webdynpro for java applications

    Hi ,
    is there any way to access and display the BI data in portal using webdynpro for java applications like we did in Visual composer.
    if not how to integrate the BI data in webdynpro applications ?
    Regards,
    Govindu

    Hi,
    Yes there are ways to do it. But may your scenario and the scenario for which I have done may differ.
    You can use openhub to get the data in a flat file and then read it into weddynpro through a java service OR
    You can use DBlink(which i have done).
    Please refer the link below:
    [Link|Data from BW to Oracle.;
    This I have done in NW04s. Not sure whether a better solution is available in the newer release.
    Hope it helps.
    Regards,
    Manoj

  • How to access Workfow Container data in a program.

    Hello I need to a access Workflow COntainer data for a particular workitem in a program. How to access these using Tables or standard function modules.
    Thanks in advance.

    swc_container it_event_container.                       
    swc_create_container it_event_container.                 
    CALL FUNCTION 'SWW_WI_CONTAINER_READ'
                EXPORTING
                  wi_id                    = wd_id
                TABLES
                  wi_container             = it_event_container
                EXCEPTIONS
                  container_does_not_exist = 1
                  read_failed              = 2
                  OTHERS                   = 3.
    if sy-subrc = 0.
    READ TABLE it_event_container WITH KEY element = 'name of your workflow container element'.
                IF sy-subrc = 0.
                  w_variable= it_event_container-value.
                ENDIF.
    endif.
    Regards
    Kedar

  • Programmed Binding (Container IF) - how to access source container data

    Hi,
    I have created a programmed binding (container IF) using a function module based on SWA_BINDING_TEMPLATE.
    I want to access an element (Meldung) based on BUS2078 (QM notification) from my source container and then retrieve the material from this element.
    When the element is a simple element such as WfInitiator for example I cant retrieve the value using the get method on the source container but when it is a complex element such as a BOR object it does not work. How can I retrieve such data.
    Thanks for your help,
    Emmanuel

    I finally found the answer last week, here is how I have done :
        DATA : l_matnr TYPE matnr.
        DATA : l_string TYPE string.
        DATA: lcx_container TYPE REF TO cx_swf_cnt_container.
        DATA: b_meldung TYPE swf_bor_object.
        TRY.
            CALL METHOD source_container->get
              EXPORTING
                name  = 'Meldung'
              IMPORTING
                value = b_meldung.
            swf_get_property b_meldung 'Material' l_matnr.
          CATCH cx_swf_cnt_elem_not_found .
            l_string = 'cx_swf_cnt_elem_not_found'.
          CATCH cx_swf_cnt_elem_type_conflict .
            l_string = 'cx_swf_cnt_elem_type_conflict'.
          CATCH cx_swf_cnt_unit_type_conflict .
            l_string = 'cx_swf_cnt_unit_type_conflict'.
          CATCH cx_swf_cnt_container INTO lcx_container.
            l_string = lcx_container->t100_msg.
        ENDTRY.
    Emmanuel

  • How to access Sybase IQ data from SAP BW

    Hi,
    I read from Sybase website that we can access Sybase IQ data from SAP BW using Remote Cube through JDBC driver.
    Is there any documentation on how to configure that?
    Thanks in advance for your help.
    Our BW version is 7.01
    Sybase IQ is 15.4
    Thanks,
    CH

    Hi,
    The two files that are created are one is Control File ( will save as filename_s ) and other is data file. The control file will give you the details of your fields in your Infospoke
    regards
    Srini
    Message was edited by:
            Srinivas

  • How to access client specific data in VC through BAPI

    Hi Experts,
         I am Using BAPI to insert the values  in to the back end system from a form, But the values are not getting inserted in to the back end system. BAPI developed is in client 100 but through VC i am able to get the values only from client 800. can any one of you help how to access the data from client 100 in VC.
    Regards,
    Lakshmi

    Hi Prachi,
          Your answer is really very helpfull to me thanks a lot for your reply, but the data hasn't been entered in to back end system in client 800 also.In VC just i took the BAPI and from the input port of BAPI i have dragged and select ADD form then the UI elements had automatically added in to the form,now when i entered the values in the form and submit the values are not entered in to the back end system. I am not knowing where the error is.can you please help me out in this
    Thanks and Regards,
    Lakshmi.

  • How to access listbox binding data from a button which is not part of listbox in xaml page

    Hi
    I have the below listbox and its bdining as below
     <ListBox x:Name="listMyPosts" ItemsSource="{Binding Path=MyPostsDataSource}" Grid.Row="0"  >
               <ListBox.ItemTemplate >
                          <DataTemplate >                                      
                                        <StackPanel Orientation="Horizontal">
                                            <TextBlock Text="{Binding
    NewPostText ,Mode=TwoWay}"/>
                                            <TextBlock Text="{Binding
    NewPostSender}"/>
                                        </StackPanel>                                      
                                </DataTemplate>
                </ListBox.ItemTemplate>
               <Button content="Send Post" command ="Binding SendClickCommand} />
      </ListBox>
    And i am assining postsViewmodel
    private PostsViewModel _PostsViewModel ;
    public Conversation()
    InitializeComponent();
    _PostsViewModel = new PostsViewModel ();
    this.DataContext = _PostsViewModel ;
    public ObservableCollection<PostsModel> MyPostsDataSource
    get
    if (_MyPostsDataSource== null)
    _MyPostsDataSource= GetMyPosts();
    return _MyPostsDataSource;
    set
    this._MyPostsDataSource = value;
    RaisePropertyChanged("MyPostsDataSource");
    is that possible to access listbox binding data from the ViewModel's SendClickCommand property ?
    Krrishna

    If you need to pass to the command selected item, try this
    <Button Сontent="Send Post"
          Сommand ="{Binding SendClickCommand}"
          CommandParameter={Binding ElementName=listMyPosts,
    Path=SelectedItem}/>
    msdn

  • How to access two oracle data base with out DB link

    Hi,
    I have two data base schema
    one is held in oracle 10g and the other in 11g ,Currently i am using DB link to access both the database. i am accessing around 70 tables using DB link.
    As per new requirement i have to remove DB link ,is there any other way i can access both database with out DB link.
    Thanks,

    malarkandy wrote:
    I have two data base schema
    one is held in oracle 10g and the other in 11g ,Currently i am using DB link to access both the database. i am accessing around 70 tables using DB link.
    As per new requirement i have to remove DB link ,is there any other way i can access both database with out DB link.Yes. But that needs another network and application interface instead of a database link.
    The target database can implement PL/SQL web services. These can be called via HTTP.
    The local database can use UTL_HTTP to make a call to the target database's web service for accessing target database data.
    Both databases can use AQ (Advance Queues). This can be integrated with an application server's JMS queues.
    This enable one database to enqueue a request to the other database, and for that database to respond by sending data.
    There are numerous such type of interfaces that can be used. Some primitive. Some advanced. Some simple. Some complex.
    The easiest and most flexible mechanism is however a database link. And it does not make sense to disallow database links for security and management reasons, but allow JMS for example. The network infrastructure is the same for both methods. The network protocol is the same. The security issues and concerns are the same - except that JMS for example is significantly more moving parts and make configuration and security a lot more complex than using a database link.

  • How to access Previous Records' Data from within a Query?

    Hi All,
    I am making a report in which I need to compare my "Registration Start Date" with "Registration End Date" of previous registration of same customer. This is to check if there are gaps between any customer's registrations.
    In scenario shown below, I want to filter out RegID '1' as it comes after a gap from previous registration(RegID '3') of the same customer.
    RegID CustID Registration Start Registration End
    1 1 01/04/2005 07/04/2005
    2 2 01/03/2005 29/05/2005
    3 1 21/03/2005 29/03/2005
    4 1 01/03/2005 21/04/2005
    I created the join of this table with itself to pick previous records. it is something like:
    Current_Rec.Cust ID = Prev_Rec.CustID AND
    Current_Rec.RegStart > Prev_Rec.RegEnd
    But this gives wrong data if customer has 3 back-to-back registrations. i.e. Shows last registration in query results as their is a gap between 3rd and 1st registration. But ofcourse there was another record between these two(which was 2nd registration).
    It would be so nice of you guys if you can suggest a solution to this. Any oracle function?
    Thanks & Regards,
    Ahsan

    I Assume the following is your sample data
    Table Name: Tab1
    RegID CustID Registration_Start      Registration_End
    1      1      01/04/2005           07/04/2005
    2      2      01/03/2005           29/05/2005
    3      1      21/03/2005           29/03/2005
    4      1      01/03/2005           21/03/2005
    Note : For the Regid "4" I have changed the Registration_End to 21/03/2005. It was earlier 21/04/2005.
    Coming to the query, you need to generate the list of regid that have gaps.
    Try the following query:
    SELECT c.*
    FROM tab1 c
    WHERE c.reg_id NOT IN (
    SELECT a.reg_id
    FROM tab1 a, tab1 b
    WHERE a.cust_id = b.cust_id
    AND a.registration_end = b.registration_start
    Note: I am sorry I didn't have access to the data base to execute my query. Correct me if I am wrong.
    Regards,
    Somu

  • How to access SharePoint External Data column using Silverlight Client Object Model

    Hi Friends,
    I have one sharepoint list which has column of type External Data type. My need is to access each item and get the values from the External Data Type column field.
    Can anyone help me how to acheive this. I am begineer in Silverlight.
    Thanks, Cool Developer

    Hi Friends,
    I have one sharepoint list which has column of type External Data type. My need is to access each item and get the values from the External Data Type column field.
    Can anyone help me how to acheive this. I am begineer in Silverlight.
    Thanks,
    RajanThanks, Cool Developer

Maybe you are looking for