How to access lyrics on the 11.0.4.4 update?

the new update has limited the songs that i can put lyrics into. any suggestions on how to solve this?

The instructions in the article from which you came are substantially still correct. The only difference is that the link to manage hidden purchases is titled "manage" now and is located under the iTunes in the Cloud header.
Regards.

Similar Messages

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How can I turn off the daily nagging about software updates?

How can I turn off the daily nagging about software updates?
I am _very_ annoyed at having to answer this every day, day after day after day.

Thanks, PJRS.
But if I'm reading that right, the only way to get the nagging to stop is to accept all the download that Software Downloads suggest.
Quite often it pertains only to software I never use. In these cases, I'm not interested in downloading it.
And also -- if I'm understanding that document -- I have to respond every time the nagging drops down (at least once per day).
99% of the time I have no desire to download the suggested software.
In ANY case, it is outrageous that the software resorts to harassing a customer without at least a readily visible means to turning it off
SO -- please let me know what I'm misunderstanding -- thanks..

How to access and restore the files in recovery D on my HP Pavilion Windows 7??????

Im not very good with the technological side of computers, but it asked me to restore to factory settings after turning my computer on in the morning. I asked it to back up my computer so I can restore it which I believe it did to the Recovery D drive. I can open this file but it comes up with
Recovery Partition Warning
This area of your hard drive (or partition) contains files used to perform and system recover.
Do no delete or alter any of these files
Any change to this partition could prevent a system recovery in the future.
It also says there is 1.94GB free of 15.7GB which must mean there are files in there but I dont know how to access them.
Please help and please try to speak in term in which I may understand. As I said I dont really understand computer language lol.
Thanks in advance for your help.

Thank you. I think I completely stuffed it up. I didnt put anything into my computer to back it up like an external hard drive because I dont think I actually know what the computer was doing at the time so looks like I may have lost all my previously applications, settings and data. Oh well I'll have to live with that, Thanks for your help much appreciated

Realtime data for a flash game - how to access/handle/poll the back end.

Hi,
I'm about to start working on a game that will be played on multiple consoles simltaneously. The user input from each console will be fed into a server and would populate a database/external store. This needs to be a client/server architecture where the flash client (the game on the kiosk), works on real time data that it gets from the server. Keeping in mind the "real" time aspect of the gamelplay and that it would involve multiple users at a time, I'm not really sure of how to interface the database with AS. The back end will essentially be PHP/MYSQL driven and I was thinking of maybe using AMFPHP service calls. But would this be efficient for a real-time setup ? Also, the users of the game, can be playing it physically on a touch screen kiosk , on the web, on SMS all at the same time!!
There are aspects in the game design, where a character changes animation based on their input. For example: If a user is playing an auction game and if his bid is the lowest (at the time of bidding), his character might start jumping. I'm not sure how to access this real time information from the database so that I can use it in Flash succesfully for such a client/server based multiplayer game.
Please advice.
Thanks
smaira
Message was edited by: sameermaira

you would use the urlloader class from flash to access your server-side php and your php will query your database.

How to access objects in the Child Form from Parent form.

I have a requirement in which I have to first open a Child Form from a Parent Form. Then I want to access objects in the Child Form from Parent form. For example, I want to insert a record into a block present in Child Form by executing statements from a trigger present in Parent Form.
I cannot use object groups since I cannot write code into Child Form to first create object groups into Child Form.
I have tried to achieved it using the following (working of my testcase) :
1) Created two new Forms TESTFORM1.fmb (parent) and TESTFORM2.fmb (child).
2) Created a block named BLK1 manually in TESTFORM1.
3) Created two items in BLK1:
1.PJC1 which is a text item.
2.OPEN which is a push button.
4) Created a new block using data block wizard for a table EMPLOYEE_S1. Created items corresponding to all columns present in EMPLOYEE_S1 table.
5) In WHEN-NEW-FORM-INSTANCE trigger of TESTFORM1 set the first navigation block to BLK1. In BLK1 first navigable item is PJC1.
6) In WHEN-NEW-ITEM-INSTANCE of PJC1, code has been written to automatically execute the WHEN-BUTTON-PRESSED trigger for the "Open" button.
7) In WHEN-BUTTON-PRESSED trigger of OPEN item, TESTFORM2 is opened using the following statement :
open_form(‘TESTFORM2',no_activate,no_session,SHARE_LIBRARY_DATA);
Since its NO_ACTIVATE, the code flows without giving handle to TESTFORM2.
8) After invoking OPEN_FORM, a GO_FORM(‘TESTFORM2’) is now called to set the focus to TESTFORM2
PROBLEM AT HAND
===============
After Step 8, I notice that it passes the focus to TESTFORM2, and statements after go_form (in Parent Form trigger) doesnot executes.
I need go_form with no_activate, similar to open_form.
Edited by: harishgupt on Oct 12, 2008 11:32 PM

isn't it easier to find a solution without a second form? If you have a second window, then you can navigate and code whatever you want.
If you must use a second form, then you can handle this with WHEN-WINDOW-ACTIVATED and meta-data, which you have to store in global variables... ( I can give you hints if the one-form-solution is no option for you )

Basic XML Publisher Question: How to access tags in the higher levels?

Hi All,
We have a basic question in XML Publisher.
We have a xml hierarchy like below:
<CD_CATALOG>
<CATALOG>
<CAT_NAME> CATALOG 1</CAT_NAME>
<CD>
<TITLE>TITLE1 </TITLE>
<ARTIST>ARTIST1 </ARTIST>
</CD>
<CD>
<TITLE> TITLE2</TITLE>
<ARTIST>ARTIST2 </ARTIST>
</CD>
</CATALOG>
<CATALOG>
<CAT_NAME> CATALOG 2</CAT_NAME>
<CD>
<TITLE>TITLE3 </TITLE>
<ARTIST>ARTIST3 </ARTIST>
</CD>
<CD>
<TITLE> TITLE4</TITLE>
<ARTIST>ARTIST4 </ARTIST>
</CD>
</CATALOG>
</CD_CATALOG>
We need to create a report like below:
CATALOG_NAME     CD_TITLE     CD_ARTISTCATALOG 1     TITLE1     ARTIST1
CATALOG 1     TITLE2     ARTIST2
CATALOG 2     TITLE3     ARTIST3
CATALOG 2     TITLE4     ARTIST4
So we have to loop at the level of <CD> using for-each CD. But when we are inside this loop, we cannot access the value of CAT_NAME which is at a higher level.
How can we solve this?
Right now, we are using the work-around of set_variable and get_Variable. We are setting the value of CAT_NAME inside an outer loop, and using it inside the inner loop using get_variable.
Is this the proper way to do this or are there better ways to do this? We are running into troubles when the data is inside tables.

you can use
<?../CAT_NAME?>copy past to your template
<?for-each:CD?> <?../CAT_NAME?> <?TITLE?> <?ARTIST?> <?end for-each?>

How to show lyrics at the bottom of a music video in Premiere 6.0???

Hi all,
I am a very novice user of Premiere 6.0 and have a fun video my class is making to the tune of a popular song. I have laid down the tracks and video but need to have the lyrics running at the bottom of the screen. I made a rolling credit title slide and put it in the Video 2 track area. Video 1 has the actual music video action. I need to get the lyrics to show at the bottom, how do I do that? I am having a tough time trying to get both to show at once.
Sorry if this is the wrong place to post this question. I need an answer quick!
Thanks!

Yes, the Premiere ELEMENTS forum is the wrong place... you need
http://forums.adobe.com/community/premiere/premierepro_previous
P6 is so old that I don't remember if it will do a LOWER THIRD (check the help file or manual) or if you have to do PIP (Picture in Picture)
But... Google for both if you can't find in the help file or manual
And, post any future P6 questions in the other forum

How to access (or configure) the web based Oracle Beehive workspaces client

Hello,
In the one of the Oracle Beehive online trial, there is a demo about working with workspaces using a web interface:
https://beehive-ondemand.oracle.com/Documents.html
I've been searching the documentation how can I access this web client on my installation, but I hadn't find the URL.
I'm wondering if this web client is included in the 1.4 version, if so, how can I access it? Do I have to configure it or install it? How?
Thanks for your help.
Edited by: user3585264 on Oct 18, 2008 9:33 PM

Hello
this client is not provided with the 1.4.1., but it is expected with the next release (in a couple of month normally, that's what great weith beehive releases, every 2-3 month you get a lot of news !! )
Stay tuned on MGMT - Kids, that's Oracle new anthem (or it should be :D, that song was everywhere during OOW, along with Time to Pretend)

Re: [SunONE-JATO] How to Access methods in the MainAppServletBase class from a view bean

OK, fair enough.
Look at the ServletConfig class.
c
Purvashada wrote:
>
We had that option. We decided against the
property files as we can get this dynamically.
There has been problems when this property
was set incorrectly at the time of installation.
Are there any api's to get the servername and
port number other than through request object..
--- "Craig V. Conover" <craig.conover@s...> wrote:
So I guess my question is, why do you need a user
request to get this
information?
You should be able to get this info when the
application is started up,
from a props file.
Does this info change from day to day? If not, why
not create a props
file on the machine that the app is running that has
this info?
Then in the servlet's init method, read this prop
file.
Does that work for you? Not sure how a user request
is needed to
determine this? If it is, please explain.
I have used this same technique for database
properties (servername,
instance name, uid, pwd, etc).
On the QA machine was the properties that pointed to
the QA database,
and on the Production machine, the property file
with the same name had
props that pointed to the Production database.
craig
Purvashada wrote:
It is a static data that is same for all theusers.
It is application level data but generateddynamically
to get the server name and the port number the appis
running on..
Thanks
--- "Craig V. Conover" <craig.conover@s...>wrote:
OK, so how does doing this only once help you.
Wouldn't you need to do
this for each individual end user?
I'm not suggesting that this is request scoped,but
maybe session scoped.
If so, then do this in the module servlet's
onNewSession event.
If this is per user, then storing it staticallyis
problematic because
all users will be using the same data which Idon't
think you want.
Let me know if my assumptions are correct.
craig
Purvashada wrote:
Basically, I need to pass the host url/request
url
to
another server which then posts the results
back to this server.
I need to get the host url dynamically.
This is what I am doing in my code to
get the host url..
URL =req.getScheme() + "://" +
req.getServerName()
+
":" + req.getServerPort();
Thanks
--- "Craig V. Conover" <craig.conover@s...>wrote:
Correct, that is a per request event.
Sounds like we need to figure out a newapproach.
Please elaborate on your requirements for
doing
whatever it is you require.
Maybe we can suggest an alternative, orperhaps
reveal that it may not
be necessary after all.
craig
Purvashada wrote:
I had added this code in the
initializeRequestContext(..)
Hoping it would be called once.
It looks like it is called for every
request.
HttpServletRequest req =requestContext.getRequest();
setActionURL(req);
If I add the code in the init() method
how can I get the HttpServletRequest
getRequest()
Thanks
--- "Craig V. Conover"
<craig.conover@s...>
wrote:
cool.
Be careful about how you update this URL
when
you
use setURL method.
The servlets in JATO are the only shared
(Application scope rather than
Request scope like ViewBeans and
Models),
and
that
you could potentially
have sync/multithread issues. You said
you
were
only
updating once at
the start of the App, so you should be
fine.
I
assume you are doing this
from an init method or init event in theservlet
class? If so, no worries.
Also, just to be sure everyone follows,
I am
not
suggesting that you
write syncronize code in the servlets asthis
will
be a potential bottle
neck in your app's scalibility. This is
not
a
JATO
shortcoming as there
are alternatives to do this sort of
coding.
craig
Purvashada wrote:
I made the method static and is
accessible..
--- "Craig V. Conover"<craig.conover@s...>
wrote:
I would assume it is a static
method, so
just
do:
MainAppServletBase.getURL()
right?
If not static, it probably should
be. If
you
feel it
should not be
static, let us know why/what your
requirements
are.
>
=== message truncated ===
To download the latest version of S1AF (JATO), please visit one of the
following locations:
Framework + IDE plugin for Sun ONE Studio 4 Update 1, Community Edition:
http://wwws.sun.com/software/download/products/Appl_Frmwk_2.0_CE.html
Framework + IDE pluign for Sun ONE Studio 4 Update 1, Enterprise Edition:
http://wwws.sun.com/software/download/products/Appl_Frmwk_2.0_EE.html
Previous versions of JATO:
http://www.sun.com/software/download/developer/5102.html

OK, fair enough.
Look at the ServletConfig class.
c
Purvashada wrote:
>
We had that option. We decided against the
property files as we can get this dynamically.
There has been problems when this property
was set incorrectly at the time of installation.
Are there any api's to get the servername and
port number other than through request object..
--- "Craig V. Conover" <craig.conover@s...> wrote:
So I guess my question is, why do you need a user
request to get this
information?
You should be able to get this info when the
application is started up,
from a props file.
Does this info change from day to day? If not, why
not create a props
file on the machine that the app is running that has
this info?
Then in the servlet's init method, read this prop
file.
Does that work for you? Not sure how a user request
is needed to
determine this? If it is, please explain.
I have used this same technique for database
properties (servername,
instance name, uid, pwd, etc).
On the QA machine was the properties that pointed to
the QA database,
and on the Production machine, the property file
with the same name had
props that pointed to the Production database.
craig
Purvashada wrote:
It is a static data that is same for all theusers.
It is application level data but generateddynamically
to get the server name and the port number the appis
running on..
Thanks
--- "Craig V. Conover" <craig.conover@s...>wrote:
OK, so how does doing this only once help you.
Wouldn't you need to do
this for each individual end user?
I'm not suggesting that this is request scoped,but
maybe session scoped.
If so, then do this in the module servlet's
onNewSession event.
If this is per user, then storing it staticallyis
problematic because
all users will be using the same data which Idon't
think you want.
Let me know if my assumptions are correct.
craig
Purvashada wrote:
Basically, I need to pass the host url/request
url
to
another server which then posts the results
back to this server.
I need to get the host url dynamically.
This is what I am doing in my code to
get the host url..
URL =req.getScheme() + "://" +
req.getServerName()
+
":" + req.getServerPort();
Thanks
--- "Craig V. Conover" <craig.conover@s...>wrote:
Correct, that is a per request event.
Sounds like we need to figure out a newapproach.
Please elaborate on your requirements for
doing
whatever it is you require.
Maybe we can suggest an alternative, orperhaps
reveal that it may not
be necessary after all.
craig
Purvashada wrote:
I had added this code in the
initializeRequestContext(..)
Hoping it would be called once.
It looks like it is called for every
request.
HttpServletRequest req =requestContext.getRequest();
setActionURL(req);
If I add the code in the init() method
how can I get the HttpServletRequest
getRequest()
Thanks
--- "Craig V. Conover"
<craig.conover@s...>
wrote:
cool.
Be careful about how you update this URL
when
you
use setURL method.
The servlets in JATO are the only shared
(Application scope rather than
Request scope like ViewBeans and
Models),
and
that
you could potentially
have sync/multithread issues. You said
you
were
only
updating once at
the start of the App, so you should be
fine.
I
assume you are doing this
from an init method or init event in theservlet
class? If so, no worries.
Also, just to be sure everyone follows,
I am
not
suggesting that you
write syncronize code in the servlets asthis
will
be a potential bottle
neck in your app's scalibility. This is
not
a
JATO
shortcoming as there
are alternatives to do this sort of
coding.
craig
Purvashada wrote:
I made the method static and is
accessible..
--- "Craig V. Conover"<craig.conover@s...>
wrote:
I would assume it is a static
method, so
just
do:
MainAppServletBase.getURL()
right?
If not static, it probably should
be. If
you
feel it
should not be
static, let us know why/what your
requirements
are.
>
=== message truncated ===
To download the latest version of S1AF (JATO), please visit one of the
following locations:
Framework + IDE plugin for Sun ONE Studio 4 Update 1, Community Edition:
http://wwws.sun.com/software/download/products/Appl_Frmwk_2.0_CE.html
Framework + IDE pluign for Sun ONE Studio 4 Update 1, Enterprise Edition:
http://wwws.sun.com/software/download/products/Appl_Frmwk_2.0_EE.html
Previous versions of JATO:
http://www.sun.com/software/download/developer/5102.html

How to access and set the object attributes in a task flow?

I have created a web service data control which has an operation having input as payload object. This payload object has two attributes min and max. I am calling a task flow in a dynamic region in which I want to display result of this operation for which i have to set the values for min and max. I want to set these values when I click the taskflow link. How to achieve this? I am new to adf.

Hi Arun,
Thanks for your reply.
I have tried passing parameter to a task flow, but i cannot set the action to a task flow call because it already has action for a method in a dynamic region which renders the task flow at runtime. How do i set action to task flow call link? Also once i get the parameters into the page flow scope variables, i want to pass those to one of my data control operation which displays the result in that taskflow.(i dont want to create parameter form for this operation).

How to access MailItems within the Message View?

I'm working on an Outlook 2013 plugin that needs to access the emails currently displayed in the Message View.
I already searched around a lot but I could only find ways to list emails by folder (and also the current folder). E.g.
Outlook.MAPIFolder curFolder = this.Application.ActiveExplorer().CurrentFolder;
Outlook.Items mailItems = curFolder.Items;
MailItem item = mailItems.GetFirst();
This would work fine if the user didn't apply any search filters; but if a filter is applied via the instant search bar this code would produce the same list of MailItems as if the filter wasn't applied.
I thought of two ways of potentially solving this but couldn't find any resources online that worked for either. 1) Preferably, get direct read access to the MailItem list currently rendered within the Message View. 2) Alternatively, read the value in the instant
search text-box and apply that to the currently selected folder using the Items.Find()
command.
From what I've read I don't think either of these elements have supported direct access in the Outlook Object Model; but there must be some way to solve this problem. I've also tried using
this.Application.ActiveExplorer().Filter;
but this appears to output a DASL query in the format ("http://schemas.microsoft.com/mapi/id/{00062008-0000-0000-C000-000000000046}/85700003" = 0) so I'm unsure if this is could be reformatted or be used as a filter.
Any guidance or explanations would be greatly appreciated; thanks in advance.

Hello Davon,
The Filter property is useless in that case. I spent some time researching that and found the following way:
The
GetTable method of the TableView class returns a Table object
that represents all of the Microsoft Outlook items that are contained in a TableView object.
Here is what MSDN states:
The GetTable method of the TableView object
returns a table of items from one or more folders in the same store or spanning over multiple stores, in an aggregated view. For example, an aggregated view obtained by a search across all mail items by using Instant Search. This behavior differs from the GetTable method
of the Folder object,
which obtains a table object that contains items from the same folder.
private void DemoViewGetTable()
// Obtain the Inbox folder.
Outlook.Folder inbox =
Application.Session.GetDefaultFolder(
Outlook.OlDefaultFolders.olFolderInbox)
as Outlook.Folder;
// Set ActiveExplorer.CurrentFolder to Inbox.
// Inbox must be the current folder
// for TableView.GetTable to work correctly.
Application.ActiveExplorer().CurrentFolder = inbox;
// Ensure that the current view is a table view.
if (inbox.CurrentView.ViewType ==
Outlook.OlViewType.olTableView)
Outlook.TableView view =
inbox.CurrentView as Outlook.TableView;
// No arguments are needed for View.GetTable.
Outlook.Table table = view.GetTable();
Debug.WriteLine("View Count="
+ table.GetRowCount().ToString());
while (!table.EndOfTable)
// First row in Table.
Outlook.Row nextRow = table.GetNextRow();
Debug.WriteLine(nextRow["Subject"]
+ " Modified: "
+ nextRow["LastModificationTime"]);

How to access data in the remote system

Hi everybody,
I have developed four classes.
FileInterface.java:-
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface FileInterface extends Remote {
public byte[] downloadFile(String fileName) throws
RemoteException;
FileServer.java:-
import java.io.*;
import java.rmi.*;
public class FileServer {
public static void main(String argv[]) {
if(System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
FileInterface fi = new FileImpl("FileServer");
Naming.rebind("//10.161.15.219/FileServer", fi);
} catch(Exception e) {
System.out.println("FileServer: "+e.getMessage());
e.printStackTrace();
FileImpl.java:-
import java.io.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class FileImpl extends UnicastRemoteObject
implements FileInterface {
private String name;
public FileImpl(String s) throws RemoteException{
super();
name = s;
public byte[] downloadFile(String fileName){
try {
File file = new File(fileName);
byte buffer[] = new byte[(int)file.length()];
BufferedInputStream input = new
BufferedInputStream(new FileInputStream(fileName));
input.read(buffer,0,buffer.length);
input.close();
return(buffer);
} catch(Exception e){
System.out.println("FileImpl: "+e.getMessage());
e.printStackTrace();
return(null);
FileClient.java:-
import java.io.*;
import java.rmi.*;
public class FileClient{
public static void main(String argv[]) {
if(argv.length != 2) {
System.out.println("Usage: java FileClient fileName machineName");
System.exit(0);
try {
String name = "//" + argv[1] + "/FileServer";
FileInterface fi = (FileInterface) Naming.lookup(name);
byte[] filedata = fi.downloadFile(argv[0]);
File file = new File(argv[0]);
BufferedOutputStream output = new
BufferedOutputStream(new FileOutputStream(file.getName()));
output.write(filedata,0,filedata.length);
output.flush();
output.close();
} catch(Exception e) {
System.err.println("FileServer exception: "+ e.getMessage());
e.printStackTrace();
After that when i compile classes when i give the command as
rmic FileImpl
in command prompt error is coming like this.
error: Class FileImpl not found.
1 error
Can anyone help me please,urgent.

It is generating stub and skeleton classes but when iam running FileClient after starting rmiregistry,it is coming something like
FileServer exception: FileServer
java.rmi.NotBoundException: FileServer
     at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
     at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:375)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:240)
     at sun.rmi.transport.Transport$1.run(Transport.java:153)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     at java.lang.Thread.run(Thread.java:595)
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
     at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at java.rmi.Naming.lookup(Naming.java:84)
     at FileClient.main(FileClient.java:9)
Can u help me

How do I know if the MacBook Pro SMC Firmware Update 1.4 was installed

I just ran the Software Update and the 10.6.5 update the the SMC 1.4 update were available. Both required a reboot and I didn't think I should update both at the same time. I did the 10.6.5 update first then after it completed I did the SMC 1.4 update.
The SMC update installed just as the knowledge base page said it would. But how do I know if it was installed?
My SMC firmware is at version 1.27f3. The MacBook Pro is version 4,1.
David.

Thanks for the info.
I guess the only other question I have is, was the firmware already at 1.27f3 before the update or was it updated to the version?
David.

How to access a value from "List of Values" by giving a name?

I have a "List Of Values" defined in my BI Report. It comprises list of label-value pairs.
I have defined a parameter :p_Value for the above "List Of Values" defnition. this parameter is used in datasource sql defnition to filter the query results. I configured a template which has a table that shows all the parameters used for filtering query results. If I give <?$p_Value?> in the template then the parameter value is rendered on it. But I want the "name" of the parameter and not the value. Can anybody tell me how to access name of the parameter which refers to one of value in "List of Value" defnition?

option 1:
Can you get the value from the DB in the report sql ?
You have the code, inside the report query, if you can get the decoded value form that
option2:
create another paramater, LOV and query, and make it as hidden, and use the first :param_1_value in the lov query in the second param and decode the value.
Now , you can refer the :PARAM_2_value in template which will have decoded value.

How to access lyrics on the 11.0.4.4 update?

Similar Messages

Maybe you are looking for