How to access Master Data in ERP2005 for SD

Hi All,
I installed ERP2005 in my system with MS SQL.
I do not know how to Access the Master Data in the system for SD.
Can anybody guide me.
Thank you,
Ravi.

Hi Ravi,
Firstly, have you created any Master Data. If yes, you will be able to access the same.
Sales Order Management Transactions Codes:
GENERAL ORDER MANAGEMENT
Reviewing Document Flow VA03
Searching for a Customer Sales Order by Serial Number ZV11
Order Inquiry ZV33
SALES ORDER PROCESSING
Creating Sales Order VA01
Maintaining a Sales Order VA02
Displaying a Sales Order VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring VKM1
Releasing an Order or Delivery from Flooring Hold ZKM1
Manually Pre-authorizing Blocked Credit Card Orders Z.14
Display List of RMAs by Customer VA05
Confirm RMA Goods Receipt VL02
Generate list of open return orders for deletion VA05
Display Customer returns eligibility MCSI
Removing a Billing Block (Approving Credit/Debit Requests) V.23
PRICING MASTER DATA
Create Pricing VK11
Creating a Sales Deal VB21
Maintaining a Sales Deal VB22
Displaying a Sales Deal VB23
Maintaining Prices VK12
Displaying Prices VK13
MATERIAL MASTER DATA
Creating Material Substitution Master Data VB11
Maintaining/Deleting Material Substitution Master Data VB12
Displaying Material Substitution Master Data VB13
Creating a Bundled Master MM01
Creating a Sales BOM CS01
Maintaining a Sales BOM CS02
Displaying a Sales BOM CS03
CUSTOMER MASTER DATA
Creating Partner Records XD01
Maintaining Customer Master Data XD02
Displaying Customer Master Data XD03
Deactivating a Partner VD06
CUSTOMER CREDIT INFO
Creating/Maintaining New Customer Credit Information FD32
Displaying Customer Credit Information FD33
Blocking or Unblocking a Customer VD05
SHIPPING
Creating a Delivery VL01
Displaying a Delivery VL03
Deleting a Delivery VL02
Shipment Inquiry / Display VT03
Adjusting Transfer Order - Confirmation Quantity LT12
Collectively Confirm Transfer Order LT25
Batch Shipment Confirmation VL19
Creating Service Provider/Carrier Master Data XK01
Maintaining Serive Provider/Carrier Master Data XK02
Displaying Service Provider/Carrier Master Data XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit MM02
IDoc Inquiry WE02 / WE05
Workflow Instructions
BILLING
Invoicing a Customer Shipment VF01
Reprinting an Invoice VF31
Releasing a Sales Order for Billing V.23
Creating an Invoice by Using the Billing Due List VF04
Checking Open Billing Documents VF05
Create Credit/Debit Memo FB01
A/R
Controlling Total Debit/Credit bkgs F.03
Generate FI Account balance F.08
Generate Month-to-date Inv. register F.02
Process payments FBZ1
Rqst Individual Customer Corresp. FB12
Generate Customer Correspondence F.61
Enter Batch totals under Control ttl FB07
Display G/L Acct. totals FBL3
Reverse Posted Amounts FB08
Customer Refunds FBL6
Customer Refund to other than Payer FB05
Clearing Debit/Credit on Cust. acct. FB1D
Customer Balance in Local Currency F.23
G/L Account Balance Report F.08
Create Invoice - legal entity adjust FB01
Generate Cust. Acct. statements F.27
Generate Dunning Letters F150
Generate Billing Due List VF04
Generate Blocked Billing Doc list VFX3
Inq. via Credit Release Screen VKM1
List orders by partner VA05
Past Due invoices by customer FD11
Check number info by G/L account FBL3
Display customer Line items FBL5
TREASURY - CASH APPLICATION:
Post Customer payments FF68
Verify if A/R is updated FB03
Hope The above details helps you.
Regards,
Rajesh Banka

Similar Messages

How to load master data texts for (0calmonth)

Hi pro's
i hve a issue.
How to load master data texts for 0calmonth.
any help is appreciated
regards
cheers

within the admin workbench goto source systems, right click on your source system and click on transfer global settings. There you can choose fiscal year variants and some other options to be loaded to BW.
Regards

How to create master data/text for an info object

Hi All,
I am working on a report and having a problem with an info object since it has no master data. This characteristic is supposed to be in the selection parameters and also should contain key and text in it. Since there is no master data for this info object there is no text and keys don't come up. Does any one knows how to add master data to this info object without reloading the ODS?
Thanks

Mike,
You shold load the master data into BW first,
othere wise you can do one thing
goto infopackage and schedule where in the update tab select the radio button
Always update the data,even if no masterdata is exist for that.
Regards.
Prasad

How make master data object available for ACR

Hi,
I remember that there is a program to run so that we can make the master data object available for ACR.
i am not getting the program name. Please advice.
Thanks,
Dev

Hi........
If a master data is schedule for some changes...ie InfoObjects and hierarchies that are planned for structural change are selected by default.........If u go to RSA1 >> Administrator Workbench >> Tools >> Hierarchy/Attribute Changes from the menu...........If u click on Infoobject List or Hierachy List.........u will find that those infoobjects r already selected.....
If u want to run ACR for some infoobjects manually.............either u can do it in RSA1..........by only selecting those infoobjects for which u want to run the ACR..........or u can also use the prog : RSDDS_AGGREGATES_MAINTAIN.........
If that Particular infoobject is not there in the Infoobject or Hierarchy List in RSA1..............that means no structurak changes r required...........no need to run ACR..........
Regards,
Debjani.........

How to design Master datas?? Whats is Time Scenarios???Explain..

How to design Master datas?? Whats is Time Scenarios???
Can anybody explain about Time Scenarios???

Hi..
to tell it is huge ..
but a slice of it
Design Create design documents
Prod. Make the product
Quality Confirm quality of product
Sales - Market the product
Purchase Procure the items
Accounts To control the cost of Mfg
These steps should be understood as a general approach. To what extent they must be carried out depends
on the actual situation and the experience of the project members involved.
After deciding on the business process being dealt with, the basic steps to implementing a BI based solution
are:
1. Focus on the structure of information
Develop a complete understanding of the underlying business processes. Create an Entity Relationship
Model (ERM) of the business process
The ERM as a function of the information
2. Focus on analytical needs - Overcome model complexity
Create a valid data model. Translate the ERM to the Multi-Dimensional Model (MDM) / Star schema
The MDM as a function of the analytical processing
3. Build the solution as a part of an integrated data warehouse
The Star schema on the BI stage are the InfoCubes. Translate the MDM / Star schema to one or more
InfoCube.
coming to time ..
How real-world changes are dealt with, i.e. how the different time aspects are handled is the most
important topic with data warehouses.
The attributes of a characteristic that will reside in its master data table are determined in the modeling
phase. Each attribute can be defined individually as being time dependent:
There is one time dependent check box for each attribute in the attribute tab page section.
Time dependency of an attribute allows you to keep track on the changes over time of the relation of the
characteristic and the time dependent attribute values.
In terms of technical implementation, two master data tables exist if we have both non-time dependent
and time dependent attributes.
One master data table stores all relations to non-time dependent attributes (name of the table:
/BIC/P<InfoObject name>) and
One table stores relations to time dependent attributes (name of the table: /BIC/Q<InfoObject
name>).
The time dependent attributes master data table has additional DATETO and DATEFROM system
attributes. In queries the different constellations are addressed using the key date ( Query properties).
The validity attributes are not available for navigation.
The text table, or better the description attributes, may be defined as time dependent.
SID tables with respect to master data:
The SID table is always generated if an InfoObject is not defined as attribute only (tab page general).
This table is used if the access to an Infocube or DataStore Object uses a navigational attribute or if the
access is via a characteristic without attributes. Name of the table: /BIC/S<InfoObject name>
The non-time dependent attribute SID table of a characteristic for access via non-time dependent
attributes. Name of the table: /BIC/X<InfoObject name>
The time dependent attribute SID table of a characteristic for access via time dependent attributes.
Name of the table: /BIC/Y<InfoObject name>
with regards,
hari kv

How to load master data and hierarchies from R/3 systems

HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.

HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji.

How to access reference data in BPS Exit Function

Hi Experts,
Can any please tell me how to access reference data in BPS Exit function. I am creating a copy function using ABAP Exit Function (Std copy and fox formula doesn't work for my requirement).
Please suggest,
Thanks in advance,
Shiwesh

Hi Deepti,
Thanks a lot for your reply. xth_data contains all the data based on package filteration. Let me explain you,
Say, I have a characteristic char and whose value is 'A', I want to change it to 'B' in my copy function, while keeping the original record with 'A' as well. So now I want my xth_data to contain two records, one with A and other with 'B'. I mean to say from value is 'A' and to value is 'B'. Now my package contains 'B' (the to value) as the allowed value, but not A because in the package I am setting this using a BPS variable. There are two types of variables, one is to variables other is from variable. There could be two scenarios,
1. If I set from varibale in the package: if I do so, I will have the data in xth_data containing 'A' as char value. But in this case when I change it to 'B' and try to save both the records, package won't recognize the record with value 'B' and reject it.
2. If I set to variable in the package: In this case the xth_data itself will not contain anything and I can not loop over xth_data because there is no record with 'B'. Only record available in the system is with 'A' values.
That is why I am thinking about having reference daya somewhere. I could loop over reference data and then pass it to xth_data. Package will contain to variable so it will allow all my modifications to get saved.
Thanks and regards,
Shiwesh

Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

How to identify Master data chars in a cube?

How to identify Master data chars in a cube? Is there any function module with teh help of which we can identify the master data objects in a cube. (I need to avoid manual checking as the no. of objects is more).
Regards,
R.Ravi

right click on cube..click on 'display data model'..
there expand the tree for each dimension..
under it..u will see list of char in that dimension..
for some characteristics u will see an arrow beside it..expand it..u will see further list of char..(with yellow icons)..
these are the list of attributes for that particular characteristic..
for char that have no attr..there will be no arrow beside it..
by this..u can know which char in ur cube hold master data..
Vishvesh

How to get master data records that do not have transaction data in a query

Hi,
How to get master data records that do not have transaction data in a query output. Can we create a query or any other way to get the master data records that do not have transaction data?

Hi,
Create a multiprovider which includes transactional data target and master data info object. Make sure that identification for this master data info object is ticked on both the provider.
Create report on this multiprovider , keep the master data info object in rows , and now you should able to see all the values which are there in master data info object irrespective of transaction happened or not .
Next you may create condition showing only zero keyfigure values , ie. master data without any transaction.
Hope that helps.
Regards
Mr Kapadia

How to UPDATE MASTER DATA RECORD PA0377 using FM HR_INFOTYPE_OPERATION

How to UPDATE MASTER DATA RECORD IN INFOTYPE 0377 DIRECTLY using function module HR_INFOTYPE_OPERATION ? When i use operation = 'MOD' im getting an ERROR as NO DATA STORED FOR 0377 IN SELECTION PERIOD.
       Can anyone please help me how to use HR_INFOTYPE_OPERATION to UPDATE MASTER DATA RECORD.
Thanks,
Karthi.

Hi,
please check this code
it is very useful
infotypes: 0105.
parameters: p_pernr type p0105-pernr,
            p_subty type p0105-subty,
            p_begda type p0105-begda,
            p_endda type p0105-endda,
            p_opera type pspar-actio,
            p_usrid type p0105-usrid,
            p_commt as checkbox.    "Useful only when NO_COMMIT is 'X'
data: w_return type bapireturn1,    "Error handling data
      w_key type bapipakey,         "If record has been created or changed the created/ changed
                                    "record's key (PSKEY) will be populated
      v_message type string.        "For printing returned messages
call function 'BAPI_EMPLOYEE_ENQUEUE'
exporting
    number = p_pernr
importing
    return = w_return.
if w_return is initial. "Employee is not locked
p0105-pernr = p_pernr.
p0105-subty =
p0105-usrty = p_subty.
p0105-begda = p_begda.
p0105-endda = p_endda.
p0105-usrid = p_usrid.
*Calls Internally HR_MAINTAIN_MASTERDATA
call function 'HR_INFOTYPE_OPERATION'
    exporting
      infty         = '0105'
      number        = p_pernr
      subtype       = p_subty
      validityend   = p_endda
      validitybegin = p_begda
      record        = p0105
      operation     = p_opera
      dialog_mode   = '0'
      nocommit      = 'X'
    importing
      return        = w_return
      key           = w_key.
endif.
if w_return is not initial.
message id w_return-id type w_return-type number w_return-number
          with w_return-message_v1 w_return-message_v2 w_return-message_v3
          w_return-message_v4 into v_message.
case w_return-type.
    when 'A' or 'E'.
      format color col_negative. write:/ v_message.
    when others.
      format color col_heading. write:/ v_message.
endcase.
call function 'BAPI_EMPLOYEE_DEQUEUE'
    exporting
      number = p_pernr.
else.
format color col_positive. write:/ 'Record Updated Successfully.'.
if w_key is not initial.
    write:/ 'Key contains',
          / 'Personnel Number:', w_key-employeeno,
          / 'Subtype (absence type):', w_key-subtype,
          / 'Start date of Absence:', w_key-validbegin,
          / 'End date of Absence:', w_key-validend.
endif.
commit work.
endif.
Thanks and regards
durga.K

How to activate master data in background ?

Hi All,
I would like to know How to activate master data in background ?
When I try with right clic on infoobject and choose activate I have a time out
Thanks for your help
Sebastien

Nikhil
This method is to activate the structure in development server
I want to activate the master data after an upload with a DTP in production

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

How to delete master data of materials from sap tables

how to delete master data of materials from sap tables...its needed now.
i know its not recommended but still we need to do this. give me the best possible approach.
regards,
suneetha

Hi,
I would suggest you not to write your own code to delete the entries.
BAPI_MATERIAL_DELETE, this would mark all materials selected for deletion. But still the material would exist in SAP.
Another solution: Delete a material manually and in another session execute the transaction SM04. This would display the tables which get locked when you do the operation, Then you can write your own code to delete the material numbers from all the related tables.
Regards
Subramanian

How to download master data of vendor to Excel

Dear All,
how to download master data of vendor to Excel?

Hi Expert,
To download Vendor Master Data:
Go to T-Code: SE16 and provide LFA1 for General Data and LFB1 for Company Code Data..
and Press Enter, then provide the Vendor Range and Press Execute Button.
Select Menu -- Edit --- Download then select Spread sheet provide the path to save the download file and provide file name and press OK...
Go to the provided path, which may find your Vendor Master Data in Excel format...
Regards,
GK
SAP

How to access Master Data in ERP2005 for SD

Similar Messages

Maybe you are looking for