How to access migration assistant in new mavericks os ?

how to access migration assistant in new mavericks os ?

Migration Assistant is stored in /Applications/Utilities, and you can use it to transfer files from another computer or a backup. Read > http://pondini.org/OSX/MigrateLion.html

Similar Messages

Can someone tell me how to access Migration Assistant on an IPad Air?

I have tried following instructions on how to access Migration Assistant but so far I'm stumped. Could someone walk me thru the process? Thanks

Finder is the name of an application on Macintosh computers. It does not exist on an iPad. Finder is very much like Windows Explorer in Windows. iPad does not really feature a file system that would take advantage of Finder. In fact, it does not really feature a file system at all. It is more dependent on applications.
Here is the iPad User Guide:
iPad User Guide - For iOS 7 (October 2013)Nov 1, 2013 - 23 MB
Migration Assistant and Finder both apply to Macintosh computers, and not iPads.

Enable access for assistive devices in Mavericks-how?

How is "access for assistive devices" enabled in OS 10.9.3? I've looked for it just about everywhere in System Preferences. A third-party utility that I use needs it to work fully—and says at startup that it is not switched on.

Hope this helps!

How long should migration assistant take to inspect computer for files to transfer

just purchased a mac book pro. I'm attempting to migrate my pc files to the mac. I've successfully installed migration assistant on my pc.
Migration assistant on the mac has been " inspecting your computer" for over 12 hours. Is this normal? I'm hesitant to turn it off in case it will finish eventually

If you mean it's been fifteen minutes and nothing has happened then most likely it's stuck. What are you migrating from and to?
How to use Migration Assistant to transfer files from another Mac

I was unable to access migrate assistant to reinstall my hard drive. I didn't know if it would work but I used the time machine restore button that opens up in the space movie. The computer said it would download it to "Volumes". Now I can't find it.

I was unable to access migrate assistant to restore my hard drive. Out of desperation and ignorance I opened up Time Machines space page and selected my most recent backup and pushed restore. The system accepted it and said it would intall in in "volumes". I was unable to figure out what that meant but I went a head a tried it. The download took four hours and then puff it was gone and so was my data. I can't find the back up anywhere. The only thing I think it might be is that I had named the hard drive a different name than the original (don't ask me why). Have any ideas?

Choose Go to Folder from the Finder's Go menu and provide /Volumes/ as the path.
(71792)

How to use Migration Assistant from OS 10.7.5 mac to new mac Maverick?

Got a new imac. I'm trying to use Migration assistant from my non-Maverick imac to the new one. I'm told that I have to update my former mac, but it's too old to update to Maverick.
So, how can I use Migration Assitant to transfer files?
Thank you.

The easiest method is to use the Time Machine backup from your old computer and connect it to the new machine. Then launch Migration Assistant on the new machine and use the TM backup HD to migrate to the new machine. DO NOT do this wirelessly, your profile indicates you have a Time Capsule, if you use that for your TM backup then connect it via eithernet to your new iMac to do the migration.

I have used migration assistant but new profile is created, how do i merge into one

I have recently purchased Mac book and have used migration assistant to transfer files from my old windows PC.
Due to some issues when using migration tool i had to transfer in segments, each time i did this a new user was created.
I have asked for some help and was advised that users cannot be merged however the files can be shared via dropbox.
I have received instructions as to how to do this but am stuck as once I get to the point of dropbox, I do not know what step to take next to add files into dropbox?.
Below are instructions
Pick a User Account your going to keep, make sure it's a Admin account and if need to, log into another Admin account and make it so in System Preferences > accounts.
One logs out of their current account by using the Apple menu > Log out.
Next while in one of the accounts your later planing on removing, go to the Finder > Go > Computer and window opens.
Open the MacintoshHD partition, then the Users folder and the User Account you plan to keep, then the Public folder and then locate the DropBox folder for that User. Any files placed in there will change permissions and be accessible to that user when you log into it.

The Dropbox folder is a subfolder of the home folder, which has the same name as the user account. It's under the Users folder at the top level of the startup volume ("Macintosh HD," unless you gave it a different name.)

How to use Migration Assistant when trying to transfer from MacBook to a new iMac via Ethernet cable

I've been trying to transfer data from my MacBook to my new iMac via Ethernet cable and I get to the point of the transfer starting. Then on my iMac the Migration Assistant shuts down and takes me back to my desktop. Any ideas on why this keeps happening?

Start over, restoring the OS on the new machine, and follow the steps outlined in Pondini's Setup New Mac guide using the Setup Assistant.

Migration Assistant created new account to deposit all my stuff, but I can't access that account, even after changing the password via the main acct'

I am at my wits end. The migration assistant created a new profile (I didnt konw that it would do this) and now I can't get into that profile with all the stuff from my old PC.
I have tried changing password via the main account, but to no avail. I have researched issues with Keychain, but all it tells me to do is change the login password - that doesnt work either - I cant get to all my files.

Migraine Assistant it's called.
Delete the account from the main one, create a new account and transfer files manually via a regular FAT external drive you pickup at any office or computer store, Mac's can read it.

How to use migration assistant without creating dual user accounts

I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air makes me create as soon as I do start-up? Can I just use the same name & password for both? or will that make things go badly awry?
Thanks!

If you have not booted the MBA for the first time and gone through the Setup Assistant, then I would use the Setup Assistant to make the transfer before you even create another user account. However, if you've already created the new user account on the MBA, then create a new admine one with a different username than the account you will migrate. Log into this new account, delete the first account you made, then use Migration Assistant to transfer your account from the MBP.

How long for Migration Assistant to calculate Time Machine backup file size

I have just bought a new MacBook Pro to replace one that will not start up. Consequently I am trying to migrate my user account, files and applications from a Time Machine back up - but it seems to be taking an age to calculate the Applications and "other files" sizes.
How long should I be looking at for 145GB's worth of data to be recognised by Migration Assistant?
If there is a problem with the migration, can I replace the User and Applications folders on the new MBP with those from the Time Machine back up?

it's quite safe to assume that the Migration process is stuck. there is no sense in waiting any longer. stop the migration and see what got transferred. did the home folder get transferred? you can restore just the home folder using TM and reinstall applications but that has to be done correctly. DO NOT try to copy anything from TM backups using finder.
First, make sure that your current user has different short name than the user you are trying to migrate. then control-click on TM in the dock and choose "browse other TM disks". this will let you browse TM backups. select the folder /users/username there. click on the "gears" action button in the toolbar and select 'restore to...". select to restore to /users on your main drive. you'll have to enter your admin password to do it. once the copy is complete, go to system preferences->accounts and create a new account with the same short name and password as the user you are restoring. it will say that a home directory by that name already exists and ask if you want to use it. say yes.

How to use migration assistant when the same user account name is on both computers

I want to migrate all my info from my MacBook to my new (to me) MacBook Pro. I've already set up a user account on the new MBP that has the same name as the user account on the MacBook that I want to migrate.

Snags40 wrote:
In both cases the UID for my primary User Account is 507
507? That's odd; usually the first one created is 501, then 502, etc. Could you have gone through 6 accounts?
Since I've migrated thru several Macs to get to the current state on the old MacBook, I suspect the UID has changed.
That could explain some of it, if you used Migration Assistant instead of Setup Assistant. It would have taken a lot of migrations and user accounts to get to 507, I'd think.
I still have the Powerbook that preceded the MacBook. How can I determine the UID on 10.4.11? The right click on the Account name in User Accounts doesn't show that value. I'd like to see if UID has changed going from 10.4 to 10.5.
Good question. I skipped Tiger, and don't recall earlier versions, but this article may help: http://hints.macworld.com/article.php?story=20051022175850619&query=change%252BU ID

How smart is migration assistant

If I replace my old 17" PB with a new Macbook Pro, how smart is the migration assistant? If I use it migrate my complete old system to the new machine, will it overwrite the iLife06 (for example) that comes with the new machine, with my current old iLife version? Will there be issues migrating from PPC to Intel-based?
Should I only migrate the user directory instead?
About the only thing that's keeping me from hitting the 'submit order' button is the worrying about how much hassle it will be to go from one machine to the other. :-/

See http://docs.info.apple.com/article.html?artnum=25773, for starters. Note, the article hasn't been updated since February. I don't have one, so I can't say. However, you can do a search in these forums for migration AND Intel and see what pops up.

Migration Assistant created new user account & can't delete it

Hi - I'm a new Mac user (MacBook Pro). I seem to have an extra account and am not sure why. Here's what happened:
I setup my MacBook Pro and did not run Migration Assistant at that time. I later ran Migration Assistant to migrate PC files to the MacBook. A second account was created after the migration. All my PC content is in the second account. None in the original account. When I look at the Users & Groups in System Preferences, I see that both accounts are Admin accounts.
I do not want the original account that was created for me on the MacBook Pro before I trasnferred any of my PC files over. I just want to keep the account that was created to house all my PC files when they were migrated over. However I cannot migrate that original account - the " - " is just greyed out.
Please can someone advise how I delete it. I do not want two admin user acconts - just the onen with all my PC files in.
I realise I should have done the PC transfer at start up using "set up assistant" but for whatever reasons I chose to delay it by a day or so and hence used Windows Migration Assistant.
Please tell me how I can delete the surplus user account created for me originally when I used the Mac for the first time.
Thanks in advance for all feedback and advice. This is my first Mac after 20 years of Windows, so big step for me and still learning! So easy to understand instructions please would be bonus
thanks all

Unfortunately I see that no one has been able to help me with this . . . so instead of addressing the question above. can someone please tell me how to reset my Mac to "factory settings", ie how it was the day I bought it and before I switched it on for the first time. Delete everything on there now. That way I will do set up properly and transfer data from my PC first of all instead of revisiting it.
Please can someone tell me how to do this
Many thanks

Migration Assistant on new MBP does not see my Powerbook G4

I am trying to migrate my data from my Powerbook G4 to a new MBP. I get the G4 into target mode, but the MBP just says something about the computer must have Mac OSX installed, which of course I do. Any suggestions on how to troubleshoot this?

We've updated it slightly, V.K. Just got the revision completed and it should be going to User Tips soon. Here she be if want to refer to the new version. Let me know if you find glaring errors or omissions.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

How to access migration assistant in new mavericks os ?

Similar Messages

Maybe you are looking for