How to access more than one catalog from ECC

We use the catalogs in SRM from ECC, ME21N. But we are only able to access one catalog. Is there any way to access different catalogs for the users. We have set up different catalogs in customizing but are not able to selcet them.
At the moment we have one for each country, and would like to be able to select among theese, not create one big one? I have heard of an ad-on from SAP is this correct? Any advice on further readings or suggestions to solutions on this problem?
Regards
Ivar

Hi Ivar,
We are also having almost same requirement for multiple catalogs.Can you please let me know how to proceed further on this.
Right now we are able to config only 1 catalog and its working but we need two more to be added.
Regards,
Pavan.

Similar Messages

Use more than one Catalog from ECC 6

At the configuration point in ECC 6 Materials Management ... Web Services: ID and Description I can describe more than one catalog URL address , but the user see in transaction ME21N or ME51N only that catalog with the default flag.
Is it possible to use more than one catalog by these SAP standard functionality?

Hi Markus,
no!
Unfortunatly, it is just posible to use ONE catalogue. At the beginning of development there was kept open the posibilitiy to make posible the use several catalogues in a later state. That`s mainly the reason why more than one can be entered in customizing. But the functionality of using more than one was never developed later on.
best regards,
Angela

How to email more than one photo from camera roll

How do e-mail more than one photo from the camera roll at a time?

Go to the camera roll, open the thumbnails, click on the arrow in the top right, select up to 5 photos, click on share in the top left and select email.

How to delete more than one workbook from command line

Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
Alex

Hi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael

How to restrict more than one delivery from one sales order.

Hi Guys,
We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
We want only one delivery for one sales order and rest of line items should be treated as rejected.
Kindly help
Thanks in advance,
Balu

Hi MP,
Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
Thanks,
Balu.
Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

How to use more than one ipod from one computer

I've got my 30gb ipod set up and working fine from my pc. I've got my wife an ipod nano and want to set her's up totally separately. How can I do this?

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single Mac or Windows user account
c) Creating multiple Mac or Windows user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): iPod - Syncing Music
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create A New User Account In Vista

Need Help, how to create more than one rectangle from one button in one stage of canvas

Dear Guys,
I has problem to create more than one rectangle canvas from one button. here my role to create :
1. I create input size with textfield
2. I click button called "submit query"
3. My web will create a rectangle with specific size.
My problem come when I click again the button, my old rectangle has been remove than my new rectangle has created.
My question is : how I can create more than one without delete/remove the old I was created?
Here my Code :
<head><meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><link rel="stylesheet" type="text/css" media="all" href="css/style.css"><script src="kinetic-v4.7.2.min.js"></script></head> <body><label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5"><br> <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5"><br> <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5"><br> <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="5" maxlength="5"><br> <input name="submit" type="submit"> <script defer>              var stage = new Kinetic.Stage({                container: 'container',                width: 943.5,                height: 254.10              });              var layer = new Kinetic.Layer();              var rectX = stage.getWidth() / 2 - 50;              var rectY = stage.getHeight() / 2 - 50;                            var group = new Kinetic.Group({                draggable: true              });                                         var box = new Kinetic.Rect({                x: rectX,                y: rectY,                width: <?php echo ($_POST['panjang']/10)/1.3; ?>,                height: <?php echo $_POST['lebar']/10; ?>,                //fill: '#00D2FF',                stroke: 'blue',                strokeWidth: 2                //draggable: true              });               var simpleText = new Kinetic.Text({                x: Math.round(box.getWidth() / 2),                y: Math.round(box.getHeight() / 2),                text: '<?php echo $_POST['tinggi'].'/'.$_POST['nam_pac']; ?>',                fontSize: 30,                fontFamily: 'Calibri',                fill: 'blue',              });                                          // add cursor styling              box.on('mouseover', function() {                document.body.style.cursor = 'pointer';              });              box.on('mouseout', function() {                document.body.style.cursor = 'default';              });                            group.add(box);              group.add(simpleText);              layer.add(group);              stage.add(layer);            </script></body>
this is my printscreen may help you to help me :
thanks before to help me
Regards,
Prabowo.

It's work Ken, but if I modify your code into my code.
error again. they say like before (...is undefined)
May You want to check my code
<?php
include('pinambung.php');
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>GI Loading Plan Maker</title>
<meta name="viewport" content="width=device-width" />
<link rel="stylesheet" type="text/css" media="all" href="css/style_2.css">
<script src="js/kinetic-v4.7.2.min.js"></script>
<script src="js/CalendarPopup.js"></script>
<script src="js/jquery-1.10.2.js"></script>
</head>
<body>
<header class="w" id="header"> 
      <img src="images/headers.jpg" width="100%" height="100%" />
</header>
<nav class="w" id="nav">
      <?php include('top.php'); ?>
</nav>
<section class="w" id="main">
      <section id="content">
      <article>
        <h2>Customer Info</h2>
        <form id="myForm" action="insert.php" method="post">
        <label>Customer Name :</label><input name="cs_name" id="cs_name" type="text" size="25" maxlength="50">
        <br>
        <label>Date of Shipment :</label><input name="shipment_date" id="shipment_date" type="text" size="10" maxlength="12" > use format : YYYY-MM-DD
        <br />
        <label>Container Name :</label><input name="con_num" id="con_num" type="text" size="10" maxlength="12">
        <label>Revision :</label><input name="revision" id="revision" type="text" size="5" maxlength="5"><br />
        <label>Prepared by :</label><input name="prepared_by" id="prepared_by" type="text" size="25" maxlength="50">
        <button id="saveinfo">Save As DB</button>
        <button id="saveall">Save As Image</button>
        <button id="print" onclick="window.print();return false">Print</button>
        </form>
        <span id="result"></span>
        <script type="text/javascript" src="js/insert.js"></script>
      </article>
          <br /><br />
      <article>
          <h2>Packing Info</h2>
        <label>Container Type :</label>
        40' HC<input name="con_type" type="radio" id="con_type" value="40hc">
        40'<input name="con_type" type="radio" id="con_type" value="40">
        20<input name="con_type" type="radio" id="con_type" value="20"><br />
        <input name="loadstan" type="button" value="Create Container" id="isSelect">
        <button id="removecon">Remove Container</button>
        <br />
        <label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5">
        <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5">
        <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5">
        <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="20" maxlength="55">
        <input name="loadstan" id="loadstan" type="button" value="Load Standard Packing" onclick="window.open('spk.php', 'winpopup', 'toolbar=no,statusbar=no,menubar=no,resizable=yes,scrollbars=yes,width=300,height=400');">
        <input name="submit" type="submit" value="Create Box">
        <button id="remove">Remove Box</button><br />
      </article>
    </section>
    <aside id="sidebar">
      <label for="layer-to-delate">Select a layer to delete or rotate</label><br />
      <select id="layer-to-delete" size="14"></select><br />
      <input id="delete-layer-button" type="button" value="Delete layer">
      <input id="rotate-layer-button" type="button" value="Rotate box">
    </aside>
    <section id="content2">
      <div id="container">
      </div>
      <script defer>
      function radians (degrees) {return degrees * (Math.PI/180)}
      function degrees (radians) {return radians * (180/Math.PI)}
      function angle (cx, cy, px, py) {var x = cx - px; var y = cy - py; return Math.atan2 (-y, -x)}
      function distance (p1x, p1y, p2x, p2y) {return Math.sqrt (Math.pow ((p2x - p1x), 2) + Math.pow ((p2y - p1y), 2))}
        var stage = new Kinetic.Stage({
            container: 'container',
            width: 943.5,
            height: 254.10
        var layers = new Array();
       function addCont(){
           layer2 = new Kinetic.Layer();
            switch ($('input:radio[name=con_type]:checked').val()){
              case '40hc':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 HC (11900mm X 2300mm X 2550mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '40':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 (11900mm X 2300mm X 2250mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '20':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 580/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 20 (5800mm X 2300mm X 2250 mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
        function addRect() {
            layer = new Kinetic.Layer();
            var box = new Kinetic.Rect({
                x: 10,
                y: 10,
                width: +(($("#panjang").val()/10)/1.3),
                height: +($("#lebar").val()/10),
                stroke: 'blue',
                strokeWidth: 2
            var group = new Kinetic.Group({
                        draggable: true,
                        snap : true
            var boxLabel = $("#nam_pac").val() + "/H : " + $("#tinggi").val();
            if (($("#panjang").val() && $("#lebar").val()) != 0) {
            var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: boxLabel,
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            } else {
                var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: '',
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            group.add(box);
            group.add(simpleText);
            layer.add(group);
            stage.add(layer);
            layers.push(layer);
            $("#layer-to-delete").append("<option>Layer " + boxLabel + "</option>");
        function deleteRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers.splice(i,1)[0].destroy();
            $("#layer-to-delete > option").eq(i).remove();
        function rotateRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers[i].rotateDeg(30);
            layers[i].draw();
        $("#delete-layer-button").click(function(e) {
              deleteRect();
        $("#rotate-layer-button").click(function(e) {
            rotateRect();
        $("input[type=submit]").click(function(e) {
            addRect();
        $("#isSelect").click(function () {
              addCont();
        $("#removecon").click(function () {
              layer2.destroy();
        $(window).keypress(function(e) {
            if(!$(document.activeElement).is("label")) {
                if((e.keyCode || e.which) == 46) {
                    layer.destroy();
            if((e.keyCode || e.which) == 35) {
                    layer2.destroy();
        document.getElementById('saveall').addEventListener('click', function() {
          stage.toDataURL({
            callback: function(dataUrl) {
                  window.open(dataUrl);
        }, false);
      </script>
    </section>
</section>
<footer class="w" id="footer">
    Copyright <a href="login.php" target="_new">©</a> 2013, <a href="http://omhanggar.com" target="_new">created</a><a href="http://intranet.guentner-asia.com" target="_new"> by PT. Güntner Indonesia </a>
</footer>
</body>
</html>
thanks again before,
Prabowo

How to return more than one value from a function

hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.

I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code>

How to send more than one parameter from FORM to REPORT?

Dear all,
i can send one parameter from FORM to REPORT. but when i send more than one parameter it gives error: frm 41214 unable to run report.
here is the code i think the error is in the following line of procedure:
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_date_from='||v_date_from||'p_date_to='||v_date_to);
where to place the parameters and is there any space is required?
Thanks
Muhammad Nadeem

Dear Saeed Iqbal,
thanks for you reply.
dear i am using Form 10g run_product is not supported in this version.
i am using RUN_REPORT_OBJECT.
PROCEDURE rep_gl_ledger IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
v_date_from date;
v_date_to date;
v_detail_id_from varchar2(100);
v_detail_id_to varchar2(100);
v_voucher_type varchar2(100);
--req_no char(17);
BEGIN
v_date_from :=      :ledger_para.p_date_from;
v_date_to :=      :ledger_para.p_date_to;
v_detail_id_from :=      :ledger_para.p_detail_id_from;
v_detail_id_to :=      :ledger_para.p_detail_id_to;
v_voucher_type :=      :ledger_para.p_voucher_type;
repid := find_report_object('gl_ledger');
--repid := find_report_object('REPORT80');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_online_FRHome');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_date_from='||v_date_from||'p_date_to='||v_date_to);
--SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/* Display report in the browser */
WEB.SHOW_DOCUMENT('http://'||:GLOBAL.G_IP||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?','_blank');
ELSE
     message('Error when running report');
END IF;
END;
Regards:
Muhammad Nadeem

How to access more than one client computer behind router

I am new to ARD and have successfully logged on to a client machine at the office. I would like to access another machine behind my router. I am using pors 3283 and 5900 to access initial computer which works find. Can it be done with another computer. I have a fixed IP and run an ethernet network. Not sure what else I can tell you. Hope somebody can help?

If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, as of today you can only get reports, push package/files to etc. for a single workstation.
ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
Remote Desktop 2: How to specify a port number for a VNC client
to connect.
The only other options available now are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
Hope this helps.

How to return more than one object from SwingWorker

I am using a SwingWorker to call 3 different methods of another class (data fetch class). Each of these 3 methods returns a String array. I am able to get the first array outside the thread code using the get() method of the SwingWorker class,
final String tmpOrdNum = OrderNum;
SwingWorker worker = new SwingWorker() {
     DATA_FETCH_TO_ARRAY data_fetch = new DATA_FETCH_TO_ARRAY(tmpOrdNum);
     public Object construct(){
          String [] orderArr = data_fetch.getHeaderArray();
          //String [] detailArr = data_fetch.getDetailArray();
          //String [] storeArr = data_fetch.getStoreArray();
          return orderArr;
     //Runs on the event-dispatching thread.
     public void finished(){     }
worker.start() ;
String[] testArr = (String[])worker.get();      //gets the header array
/* HOW DO I GET THE DETAIL AND STORE ARRAYS HERE?*/I want to be able to call the other 2 methods of the data fetch class - getDetailArray() and getStoreArray() shown commented in the above code one by one.
Can someone please suggest a way of doing this? Thank you.

Return String[][] from construct method.
Here is an example (observe test method):
import java.util.*;
public class ArrayTest{
     public static void main(String[] args){
          String[][] result=(String[][])new ArrayTest().test();
          System.out.println("result1: "+Arrays.toString(result[0]));
          System.out.println("result2: "+Arrays.toString(result[1]));
          System.out.println("result3: "+Arrays.toString(result[2]));
     public Object test(){
          String[] str1={"A","B","C"};
          String[] str2={"M","N","O"};
          String[] str3={"X","Y","Z"};
          String[][] out=new String[3][];
          out[0]=str1;
          out[1]=str2;
          out[2]=str3;
          return out;
}Thanks,
Mrityunjoy

How to return more than one varibles from a method?

can you use the codes:
return var1, var2,var3;
If not, what is the correct way to do so? thanks.

You can only return 1 object from a method in Java.
However, this 1 object can contain multiple other objects. For example, a Vector object:
public Vector someMethod() {
    Vector v = new Vector();
    v.add("abc");
    v.add("xyz");
    v.add("123");
    return v;
}If these multiple objects are the same type, you can also use array to achieve want you want.
public String[] someMethod() {
    String ss = new String[3];
    ss[0] = "abc";
    ss[1] = "xyz";
    ss[2] = "123";
    return ss;
}--lichu

How to transfer more than one files over internet at once?

hi, friends,
I just wonder how to transfer more than one files from one computer to another over internet at once. Not using ftp. pls any one give me the solution.

This isn't hard to do, but it depends on your exact need. I did something very similar to let me upload all my mp3 file from home to work using sockets (don't have the code anymore..).
What I did was implement a "pull" approach rather than a "push" approach. In other words, everytime my server got a request from a client, it served up the next file. It didn't know or care that the client was always the same.
If you can set up a server to serve one file when a client attaches, then basically just put that code in a loop.
If this doesn't meet you need, it might still be helpful as a starting point...

Can you print more than one copy from eprint.

Does anyone know how to print more than one copy from eprint?

Hi JJSS,
Currently, the solution only offers one copy. If you need to print multiple copies, the workaround is to send the email multiple times.
I work for HP.

How can I select more than one song from the search results?

I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
Here is the link to that question: how can i select more than one song from drop down search bar
I hope some Windows user can help me out.

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

How to access more than one catalog from ECC

Similar Messages

Maybe you are looking for