How to access multiple instance on internet explorer

Dear
WE are on r12,
We have to configure production instance base on test, therefore we need to run two instance but explore not allow to run same time,
how can we run this.
psl advice.
thanks.

Hi,
Let's assume that you are using IE8 or later.
You should go to the File menu (Alt+F, if the menu is hidden) and then select "New Session".
This will allow you to start any number of different EBS sessions you want even for the same instance.
Regards,
Bashar

Similar Messages

Multiple instances of Internet Explorer in task manager using 100,000 KB+ memory

Hi! I recently got a virus on my computer that causes multiple instances of explorer.exe and iexplorer.exe to appear in my processes tab of task manager. Over the course of about a minute, the memory usage of each begins to climb rapidly until all of my
memory is being used by these. These do not appear in my applications, nor do they actually open up an internet explorer window. When I end task on them, another one appears about a minute later to take its place and do the same thing again. Additionally,
when I click shut down to turn my computer off, various advertisements flash on my screen for a few seconds before the computer begins to shut down. When the computer is started up, a window appears for a split second that contains only blackness. I have never
seen this window appear before the virus was obtained. When I end task on all my explorer.exe and iexplorer.exe applications at the same time, my desktop vanishes, but it also stops those applications from reappearing. This virus has caused my computer
to run unbearably slow. I have tried Spybot S&D, Exterminateit, AVG, Roadkill, and other methods and nothing seems to detect this or cure it. I am not that good with computers, but I am dying for help on the matter! If you can assist, please let me know
what I can do with detailed instructions for my sake! Thank you!!!!!!

See and follow Andy's excellent advices.
In addition...
See: "How to
Reset Internet Explorer settings".
If the issue persists...
1. Please download and run the
Microsoft Safety Scanner tool (freeware).
2. Reboot your PC.
3. Please download and update Malwarebytes Anti-Malware Free
4. Reboot Windows in
Safe Mode and run a Full Scan with Malwarebytes Anti-Malware.
5. Download and Run AdwCleaner (Freeware)
6. Reboot and Test.
Best of Luck,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile

How to print multiple pages using Internet Explorer with af:showPrintablePageBehavior

Hello,
I am facing one issue with using af:showPrintablePageBehavior. I found similar posts and google pages, but unable to fix the issue. Most relevant post is,
Print issues with af:showPrintablePageBehavior and Internet Explorer
I have a page show in a af:popup. This page contain a Title in the top, af:outputText and a Print button below it. I have added af:showPrintablePageBehavior to Print button. I am using lots of data in the af:outputText. When I click on Print button, showPrintablePageBehavior is opening new browser window with multiple pages. But when I click on the Print Preview or Print, only first page is shown.
I have tried the solution mentioned in above post but no luck.
    <f:verbatim>
        <style type="text/css">
            textarea {
                width: 95%;
                height: 350px;
                overflow: auto;
            @agent ie {
                af|document:maximized::printable {
                    position: static;
        </style>
</f:verbatim>
<af:panelStretchLayout bottomHeight="10%" startWidth="0%" endWidth="0%" topHeight="10%" inlineStyle="height: 100%; width: 100%">
<f:facet name="top">
<af:panelGroupLayout id="pnlGrpTitle" layout="vertical" halign="center" inlineStyle="width: 100%;">
<af:spacer id="titleSpacer" height="10px" />
<af:label value="Title" inlineStyle="font-weight:bold; font-size: 16px; color:#000066; padding-left: 5px" id="dialogTitle" />
<af:spacer id="titleSpacer2" height="20px" />
</af:panelGroupLayout>
</f:facet>
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="0" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="25" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelGroupLayout id="pnlTextArea" layout="scroll">
<af:outputText binding="#{mybean.tfdArea}" escape="false" id="tfdArea" />
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
<f:facet name="bottom">
<af:panelGroupLayout id="pnlGrpBottom" layout="vertical" halign="center" inlineStyle="width: 100%">
<af:commandToolbarButton id="cbPrint" shortDesc="Print" icon="/images/print.png" inlineStyle="width: 40%" >

<af:showPrintablePageBehavior />
</af:commandToolbarButton>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
Any idea how to fix it?
- Sujay

Hello,
I am facing one issue with using af:showPrintablePageBehavior. I found similar posts and google pages, but unable to fix the issue. Most relevant post is,
Print issues with af:showPrintablePageBehavior and Internet Explorer
I have a page show in a af:popup. This page contain a Title in the top, af:outputText and a Print button below it. I have added af:showPrintablePageBehavior to Print button. I am using lots of data in the af:outputText. When I click on Print button, showPrintablePageBehavior is opening new browser window with multiple pages. But when I click on the Print Preview or Print, only first page is shown.
I have tried the solution mentioned in above post but no luck.
    <f:verbatim>
        <style type="text/css">
            textarea {
                width: 95%;
                height: 350px;
                overflow: auto;
            @agent ie {
                af|document:maximized::printable {
                    position: static;
        </style>
</f:verbatim>
<af:panelStretchLayout bottomHeight="10%" startWidth="0%" endWidth="0%" topHeight="10%" inlineStyle="height: 100%; width: 100%">
<f:facet name="top">
<af:panelGroupLayout id="pnlGrpTitle" layout="vertical" halign="center" inlineStyle="width: 100%;">
<af:spacer id="titleSpacer" height="10px" />
<af:label value="Title" inlineStyle="font-weight:bold; font-size: 16px; color:#000066; padding-left: 5px" id="dialogTitle" />
<af:spacer id="titleSpacer2" height="20px" />
</af:panelGroupLayout>
</f:facet>
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="0" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="25" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelGroupLayout id="pnlTextArea" layout="scroll">
<af:outputText binding="#{mybean.tfdArea}" escape="false" id="tfdArea" />
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
<f:facet name="bottom">
<af:panelGroupLayout id="pnlGrpBottom" layout="vertical" halign="center" inlineStyle="width: 100%">
<af:commandToolbarButton id="cbPrint" shortDesc="Print" icon="/images/print.png" inlineStyle="width: 40%" >

<af:showPrintablePageBehavior />
</af:commandToolbarButton>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
Any idea how to fix it?
- Sujay

I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my work server (Microsoft server) and Online Business Banking system. How do I do it if Internet Explorer is not supported on Macs?

I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my remote work server (Microsoft server) and Online Business Banking system (Bank of America Cash Pro). How do I do it if Internet Explorer is not supported on Macs? Is there another option? Please help.
I also feel like such a moron as I am really new to Apple computers and don't even know what operating system I am using. The below is what I have. Sorry to all that are well beyond me in the Mac world. Have been a windows user for my whole life and haven't quite figured out where to find everything I need on my new laptop yet. Thanks!
With the following configuration:
PROCESSOR     065-0154     2.7GHz Dual-core Intel Core i7
MEMORY     065-0156     8GB 1333MHz DDR3 SDRAM - 2x4GB
HARD DRIVE     065-0159     750GB Serial ATA Drive @ 5400
OPTICAL DRIVE     065-0161     8x Double-Layer SuperDrive
DVI Adapter     065-0162     None
VGA Adapter     065-0164     None
REMOTE     065-0166     None
Apple Software - iWork     065-7672     No iWork preinstalled
Apple Software - Final Cut Exp     065-7682     Final Cut Express preinstalled
Apple Software - Aperture     065-0338     Aperture preinstalled
Apple Software - Logic Express     065-7675     No Logic Express Preinstalled
Apple Software - Filemaker     065-8307     No FileMaker Preinstalled
Apple Software - MS Office     065-0278     MSO-HOME & BUSINESS EDITION
KEYBOARD AND DOCUMENTATION     065-0172     Keyboard/Users Guide
COUNTRY KIT     065-0175     Country Kit

If you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/     Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers,

In a SQL query whihc has join, How to reduce Multiple instance of a table

in a SQL query which has join, How to reduce Multiple instance of a table
Here is an example: I am using Oracle 9i
is there a way to reduce no.of Person instances from the following query? or can I optimize this query further?
TABLES:
mail_table
mail_id, from_person_id, to_person_id, cc_person_id, subject, body
person_table
person_id, name, email
QUERY:
SELECT p_from.name from, p_to.name to, p_cc.name cc, subject
FROM mail, person p_from, person p_to, person p_cc
WHERE from_person_id = p_from.person_id
AND to_person_id = p_to.person_id
AND cc_person_id = p_cc.person_id
Thnanks in advance,
Babu.

SQL> select * from mail;
        ID          F          T         CC
         1          1          2          3
SQL> select * from person;
       PID NAME
         1 a
         2 b
         3 c
--Query with only ne Instance of PERSON Table
SQL> select m.id,max(decode(m.f,p.pid,p.name)) frm_name,
2         max(decode(m.t,p.pid,p.name)) to_name,
3         max(decode(m.cc,p.pid,p.name)) cc_name
4 from mail m,person p
5 where m.f = p.pid
6 or m.t = p.pid
7 or m.cc = p.pid
8 group by m.id;
        ID FRM_NAME   TO_NAME    CC_NAME
         1 a          b          c
--Expalin plan for "One instance" Query
SQL> explain plan for
2 select m.id,max(decode(m.f,p.pid,p.name)) frm_name,
3         max(decode(m.t,p.pid,p.name)) to_name,
4         max(decode(m.cc,p.pid,p.name)) cc_name
5 from mail m,person p
6 where m.f = p.pid
7 or m.t = p.pid
8 or m.cc = p.pid
9 group by m.id;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 902563036
| Id | Operation           | Name   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |        |     3 |   216 |     7 (15)| 00:00:01 |
|   1 | HASH GROUP BY      |        |     3 |   216 |     7 (15)| 00:00:01 |
|   2 |   NESTED LOOPS      |        |     3 |   216 |     6   (0)| 00:00:01 |
|   3 |    TABLE ACCESS FULL| MAIL   |     1 |    52 |     3   (0)| 00:00:01 |
|* 4 |    TABLE ACCESS FULL| PERSON |     3 |    60 |     3   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   4 - filter("M"."F"="P"."PID" OR "M"."T"="P"."PID" OR
              "M"."CC"="P"."PID")
Note
   - dynamic sampling used for this statement
--Explain plan for "Normal" query
SQL> explain plan for
2 select m.id,pf.name fname,pt.name tname,pcc.name ccname
3 from mail m,person pf,person pt,person pcc
4 where m.f = pf.pid
5 and m.t = pt.pid
6 and m.cc = pcc.pid;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 4145845855
| Id | Operation            | Name   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |        |     1 |   112 |    14 (15)| 00:00:01 |
|* 1 | HASH JOIN           |        |     1 |   112 |    14 (15)| 00:00:01 |
|* 2 |   HASH JOIN          |        |     1 |    92 |    10 (10)| 00:00:01 |
|* 3 |    HASH JOIN         |        |     1 |    72 |     7 (15)| 00:00:01 |
|   4 |     TABLE ACCESS FULL| MAIL   |     1 |    52 |     3   (0)| 00:00:01 |
|   5 |     TABLE ACCESS FULL| PERSON |     3 |    60 |     3   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|   6 |    TABLE ACCESS FULL | PERSON |     3 |    60 |     3   (0)| 00:00:01 |
|   7 |   TABLE ACCESS FULL | PERSON |     3 |    60 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("M"."CC"="PCC"."PID")
   2 - access("M"."T"="PT"."PID")
   3 - access("M"."F"="PF"."PID")
PLAN_TABLE_OUTPUT
Note
   - dynamic sampling used for this statement
25 rows selected.
Message was edited by:
        jeneesh
No indexes created...

Creating an account to access multiple instances

Hi,
How do I create a SQL Server login that is allowed to access multiple instances? Can this be done using Windows authentication only or both Windows and SQL Server login? Examples or references would be appreciated.
Thanks

A Login cannot have access to multiple instances, Windows OR SQL
You need to create same login on each SQL Server Instance for which access is required.
If possible, go with Windows Login as you do not need to manage password/policy separately.
for example, to grant DOMAIN\VGajjar access to SQL01
and SQL02:
1. Create Login on SQL01 for DOMAIN\VGajjar
2. Create Login on SQL02 for DOMAIN\VGajjar
- Vishal
SqlAndMe.com

How to make ENTER key in internet explorer run the BIP report?

In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard) and the report should run .
In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
How to make ENTER key in internet explorer run the report?
Thanks
Ashish

Perform the following steps and tell us if it resolve this issue:
1. In Internet Explorer, click Tools, and then click Internet Options.
2. Click the Security tab.
3. There are four security zones listed:
* Internet
* Local intranet
* Trusted sites
* Restricted sites
Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
4. Under Security level for this zone, click Custom Level.
5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
6. The browser will need to be restarted for the change to take effect.
Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

Adobe Access plug in for Internet Explorer 10 on Windows 8

Is Adobe Flash Access (DRM) built into Internet Explorer 10 on Windows 8? If so, what is the best way to remove the Flash Access DRM plugin on Windows 8 (using IE 10)? In the past, I would have just removed the NativeCache and APSPrivateData2 folders from the AppData/Roaming/Adobe/Flash player folder. However, if I do that on Windows 8, and try re-install the Flash Access plugin by playing a Flash Access encrypted video, I encounter alot of problems trying to play back a Flash Access encrypted video in Metro mode with IE. Does IE use the same Access plug in for both modes (Desktop and metro)?

Hi Hiroshi, thanks for the help. I'm trying to test that my video player will download the Adobe DRM plugin if its not already present on the system. I've had to do this with previous versions of Windows, and I wanted to make sure the same functionality worked on the new Windows 8 64bit tablet. When I did this on the tablet (removed the DRM plugin from the AppData/Roaming/Adobe/Flash player folder), and played an Adobe Access protected video in IE on the desktop mode, the expected behaviour occured, i.e. the browser downloaded the DRM plugin, and playback continued. However, if I then go to play back and Adobe Access protected video on IE in Metro mode, the video doesn't playback. it seems to get stuck trying to download the plugin, even tough its already been downloaded and re-installed on the system, and the video won't play.
So I was just wondering, now that Flash is built into IE 10 on Windows 8, is Adobe Access also built in (does the user ever need to download the DRM plugin on Windows 8)? And also, is there any reason that IE in metro mode would have trouble using an Adobe Access DRM plugin that was downloaded by IE in desktop mode on Windows 8? The Flash Player version is 11,3,376,12
Thanks again

How to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"

How
to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"

How to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"
http://answers.microsoft.com/en-us/ie/wiki/ie11-windows_7/how-to-disable-automatic-delivery-of-internet/66116734-6698-4456-a5f1-5ff085eb0af9

How or where do I download Internet Explorer for Mac OS 10.7.5?

How or where do I download Internet Explorer for Mac OS 10.7.5?

Internet Explorer is only supported on Windows, so you can't use it on OS X. There are a lot of browsers like Safari, Firefox or Chrome for Mac, so try them. If you need Internet Explorer, you have to install Windows on your computer. See > https://discussions.apple.com/docs/DOC-3321

How do I get rid of internet explorer on my laptop

I am so done with microsoft, hotmail and i.e.
How do I get rid of internet explorer?

The Microsoft/Windows Update site requires IE to get your monthly updates from Microsoft. So how do you plan to get your monthly updates for Windows without IE?
Even with the Add-ons for Firefox that allow you to open an IE tab in Firefox, you must have IE installed on your system.

How to allow multiple instances of air desktop application

hi all
Adobe air desktop application only allow single instance of
application. How to allow multiple instances like in other desktop
applications?.
thanks

Thanks a lot morgair, i will check with exe4j tool.
Actually the problem is, thread is not waiting for second request.
thatswhat i thought it may because of thread.
Thanks & Regards
Sudha

How to I access the equivalent of Internet Explorer's File/Login as... function?

When you visit a ftp site with Internet Explorer, you can click File/Login as... and login to see files that have been uploaded. I cannot find this function under Firefox.

You can add the username to the url in the location bar and will be prompted for the password. Use the format ftp://[email protected]
If you regularly use ftp, the [https://addons.mozilla.org/en-US/firefox/addon/684/ FireFTP] add-on may be of use to you, it enhances the ftp functionality of Firefox.

How to use multiple instances in Oracle CRM On Demand

Hi,
Just wanted to know if we can have multiple instances in Oracle CRM On Demand? Our company has bought licenses for Oracle CRM On demand and have received a single link for the development / staging, but we have two seperate business units that will be using this systems and their processes are completely different....I thing i wanted to ask is if we can have a sub system within a big system without both interfering into each others processes.
I hope it makes sense.
Thanks
Ahmed

Hi Ahmed,
This might be quite possible. Again, it depends on the organizational and technical complexity of both these BU's.
1. There can be different processes in different geographies in which your application might be used. Inorder to achieve this in a single instance of CRM On Demand.
There can be some fields that are specific to certain region, in that case you can use Roles, Access Profiles, Dynamic Layouts to change the Fields of the layouts which will allow the user to enter/read information specific to only that user.
2. Workflows can be used to trigger an event only for users in certain BU defined in your application.
Also the Sales Process is specific to a Role and by configuring them correctly you can make these processes fit your requirements.
3. There are somethings that always remain the same though, like Accounts, Contacts , other entities and the pre-defined relationships, their names. Off-course these can be modified but when modified they apply through the applications. So you won't be able to have different names to the Account entity in the Major BU and the subset BU.
I would suggest you get in touch with Oracle Expert Services if you are looking to get more details on how you can make best out of a single instance.
Good Luck!
Royston

How to access multiple instance on internet explorer

Similar Messages

Maybe you are looking for