How to access my configs n customization in my project

Hi Gurus,
I am a learner...n i have done all my configs n customization by creating a new Project in my IDES system.
However, when i am trying to use them through Easy Access Screen, i am unable to use those configs.
For Ex. I have configured new Sales District, Legal Statuses, Customer Classification etc. but when i am creating a new Customer Master through XD01, all these customizations don't appear.
Please tell what more i need to do to start using it in my project.
Thanks,
Khushal Agrawal

Dear Laxmipathi Sir,
Well Yes..actually....i have made all the fields as above madatory n have customized them.
But while creating customer master, when i go for matchcode for say in Sales District...it does not displays any entries. Neither can i enter any text their n since i made it REQUIRED field, i am unable to progress further...so i need to eixt.
Is it so beacuse i have created a Project for myself. Earlier it used to take.
Please suggest a solution.
Thanks
Khushal Agrawal

Similar Messages

How to access files outside a .jar file netbeans project

Hi, i need to access a file outside a built project inside netbeans. Ideally i would like this file next to the .jar file as myapp.properties. If possible i would like it so that when i am compiling and running the project in netbeans the file can be with the class files or something along those likes. Either way it would be nice to have different code for built projects and just running them outside a jar.
Heres what i got so far
properties = new Properties();
            InputStream in = this.getClass().getResourceAsStream("applications.properties");
            properties.load(in);
            in.close();this only works if the file is next to the classes. (think thats called the classpath ? )
Thanks for any replies!!

Your wrong code:
properties = new Properties();
InputStream in
= this.getClass().getResourceAsStream("applications.properties");
properties.load(in);
in.close();A right code:
// basic assumption 1: applications.properties
// is a pure ISO 8859-1 text file
// basic assumption 2: the file applications.properties
// is stored in the same directory where your
// jar file is stored
properties = new Properties();
try{
FileInputStream in      // assume current dir
   = new FileInputStream("applications.properties");
properties.load(in);
in.close();
catch (Exception e){
e.printStackTrace();
}

How to access Pointbase?

I create a domin,then I start the pointbase cmd,
I fill username and password both same weblogic(url:jdbc:pointbase:server://localhost:9093/weblogic_eval and driver:com.pointbase.jdbc.jdbcUniversalDriver,but I can't login it.
the error prompt is not port 9093 on listen,I don' know how to access!?

Hi Fish,
It looks like you are using the correct connection URL and driver so it is likely that Pointbase did not start when you started your server. You should check your command window for error messages regarding Pointbase. Also, make sure that your start script was invoked with POINTBASE_FLAG=true in your environment.
If you don't know if POINTBASE_FLAG=true or how that would have gotten set then trace your start script and you will see that the setDomainEnv script is configured, by default, to use Pointbase.
I can never remember the connection URL for the Pointbase console so whenever I use it I look at the value in one of the XML files in the config/jdbc dir in my domain: C:\bea_wlp102\user_projects\domains\my_domain\config\jdbc
The URL is:
jdbc:pointbase:server://localhost:9093/WEBLOGIC_EVAL
The driver is:
com.pointbase.jdbc.jdbcUniversalDriver
I don't think the URL is case-sensitive, but just in case it is you might want to try consistent capitalization. For the user/password, the same thing. The XML file specifies WEBLOGIC, not weblogic.

How to access a view object under a nested appmodule in servlet

Hi,
Can anyone tell me how to access a view object under a nested appmodule in a servlet?
I know that I can use
ApplicationModule app = Configuration.createRootApplicationModule(amDef, config);
ViewObject vo = app.findViewObject(viewObjectName);
to get hold of an appmodule and view object.
But in a nested appmodule, for example, I have am0 as root, am1 as child, and voZ within am1, what should I use for this amDef? config? and viewObjectName?
Your help would be much appreciated.

Hi,
http://radio.weblogs.com/0118231/stories/2005/07/19/nestedApplicationModules.html
Frank

P7N Diamond, unable to access RAID Config during Boot

I've got a P7N Diamond motherboard, with 6 disks attached, one SSD (boot) and I recently installed 5 1.5TB disks as well. These I would like to run in RAID 5 mode. I've enabled RAID for those channels in the BIOS, but I am unable to access the RAID config that's supposed to be available during bootup. The system also has an ADAPTEC RAID 1430SA ROHS SINGLE PCI-E LP 4-PORT controller with two disks attached, could this be messing things up? (I DO get an option to access this RAID config, but it fails claiming too little free memory (!) (It's a system with 4GB installed)) In Windows 7, the 5 disks shows up in the NV Raid as "Free disks", but I'm not able to do anything with them except setting SMART info. In the Windows Disk management they don't show up at all.
So, anyone got any ideas on how to access the raid config (F10) during boot?
All suggestions appreciated
Thanks,
Zem

The error regarding "too little free memory" isn't related to system RAM but to bios ROM address space. As already stated, the Adaptec card is causing the conflict with the NV RAID controller bios. This is actually a very common issue when trying to run multiple disk controllers in a single system and isn't any fault of the mobo. There's only so much addressable space for BIOS to reside in.
You may be able to free up some address space by disabling the LAN Option (boot) ROM in CMOS and setting the JMicron controller to IDE instead of RAID. Even better would be to disable the JMicron controller entirely.
If, after doing so, the Adaptec controller is still not able to work with the NV controller in RAID mode, then I'm afraid you're out of luck.

How to access .asmx Web Service using JAVA? Newbie

Hello Experts,
Currently, I have a project where in I have to access a ,NET web service. It is made of C#. I just want to ask how will I start the accessing process? I made this simple equation on how my project is.
Java Project + C#.Net Web Service = Integration
1. Do i need to create a Web Service too for the Java Project? If yes, What are the necessary tools needed for the creation of this Java Web Service?
2. The .NET Web Service is available online. (It is made by other people).
3. Based on the equation, what is the equivalent technology for the + sign?
4. Can you site a concrete example for accessing a web service?
5. I'm new here. Totally I have no idea where to start.
6. Thank you experts.
Edited by: Benedict.Aluan on 05 30, 08 1:38 PM
Edited by: Benedict.Aluan on 05 30, 08 1:39 PM

Hello
Thanks a lot for your help ...
I am developing simple J2EE based web service client using IBM WSAD 5.1. I have used the following code to call .asmx web service in Java
String url = "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl";
     String namespace = "http://tempuri.org/";
     name = request.getParameter("txtName");
     try
          System.out.println("In Internet Service");
          ServiceFactory factory = ServiceFactory.newInstance();
          Service serv = factory.createService(new URL(url),new QName(namespace,"TempConvert"));
          System.out.println("Got Service......");
          Call obj = (Call)serv.createCall();
          System.out.println("Got Call......");
          obj.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"");
          obj.setProperty(Call.OPERATION_STYLE_PROPERTY,"wrapped");
          obj.setTargetEndpointAddress(url);
          obj.setPortTypeName(new QName(namespace,"TempConvertSoap"));
          obj.setOperationName(new QName(namespace,"FahrenheitToCelsius"));
          obj.addParameter("param1",XMLType.XSD_STRING,String.class,ParameterMode.IN);
          obj.setReturnType(XMLType.XSD_STRING);
          System.out.println("Parameters Set.....");
          Object[] params = new Object[]{name};
          k = (String)obj.invoke(params);
          System.out.println("Result: "+k);
     catch(Exception e)
        System.out.println("Exception is : "+e);
    }But this code is throwing exception that
Invalid Address "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl"I have also tried this URL with Java Proxy. But it showing the same error.
Plz can u tell me how to access .asmx web service ?
Waiting 4 reply.

How to access a web service(.wsdl) from portal component.

Hi ,
Is there any document/tutorial available on how to access a webservice from portal component ?
I have found this linkhttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/g-i/how to access a web service.htm...
but the urls in the link are not working...
i want to know the steps to access webs service and sample code if some body has already done that..
Thanks for the help.
Lakshmi

Hi Lakshmi,
See the links below:
http://help.sap.com/saphelp_nw04/helpdata/en/f0/581140d72dc442e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a3/918340d990ce62e10000000a155106/content.htm
Hope this helps.
Regards,
Pooja.

How To Access HTTPS Web Service in Application Module

I need to know how to access HTTPS web service in application module.
If you can provide the tutorial or guidance to achieve this really appreciate.
Thanks
Sameera

Use the Web Service Proxy wizard in JDeveloper to create a class that calls your Web service, and then call this class from code in your AM.
http://docs.oracle.com/cd/E16340_01/web.1111/b31974/web_services.htm#CJAHGIEF

How to access a web service from a XLet

Hello,
I am new in software development to ITV and I dint find too many usefull information teaching how to access a web service from a XLet running in a STB. Are there anybody who can give me some help, maybe sample or tutorial?
Gratefull
David

hi,
you can "borrow" the source code from [Yambo a free soft open source presentation engine (AKA XML microbrowser Xlet )|http://www.cineca.tv/labs/mhplab/index-en.html] both local and on a http remote connection.
hope it helps..
bye
andrea

Memory Problem on 790fx-gd70 - how to access DDR Voltage in BIOS?

I have been getting memory related problems on a 6 month old system. I could only boot from one stick of RAM (Corsair TW3X4G1333C9A) but even then system was not stable for gameplay or stability test though this stick did pass overnight memtest. I returned the board, cpu and memory for them to test. They diagnosed faulty RAM and replaced. Well it worked OK for 24 hours then I started getting BSOD "PFN_List_Corrupt" and "Memory_Management" crashes.
I tested the new sticks and one fails memtest after a few seconds with 2378 errors and the other, although it passes memtest with 20 passes, crashes out straight away on Prime95 Blend Test (i.e. the one that stresses RAM).
They suggested I enter DDR Voltage manually rather than relying on Auto but no matter what I seem to enable this option is greyed out. Does anyone know which settings need changing from defaults so I can get at the voltage section?
I have tried swapping around the dimms but they are all the same regardless so not a slot problem. Now of course, I don't see it as a RAM problem either unless I am the unluckiest person to keep getting bad sticks. So now I think maybe something on the board or CPU is causing damage to the RAM or at least causing it to mis-report. Could a fault in the memory controller be doing this and if so how can I test for this?
At my wit's end here. Hope someone has some ideas - either on how to access DDR Voltage in the BIOS or get to the cause of my problem.
Many thanks.

OK thanks for explaining a bit more . This power unit did get some very good reviews in the sub $100 from many sites and from these I thought it would suit my needs. I have arranged to try a friend's 650w next week.
I think I am maybe not being clear. I have had the system running OK for six months. I had had no need to test the ram and didn't bother with stability tests at that stage. I am not a gamer and use my machine more for video and graphics work. One thing I did notice from the start was the couple of games I do have on (Call of Duty and Fallout3) would give occasional freezes. I put it down to my now rather old hot GPU which I would get around to replacing in due course.
Now the real problems started recently when I got round to replacing the stock cooler with a Titan Fenrir. Trouble with this is it overhangs Dimm1 but in moving around the memory sticks I seem to have opened a real can of worms. I could only get it to boot from one of the sticks. This stick passed memtest but would crash out of prime95 and games would freeze within a couple of minutes.
Now, the retailers here in the UK told me to send back board, cpu and RAM. They tested all 3 but they only replaced the memory and as you can see from my first post the memory related problems have continued. The memory by the way is in Corsair's list as "100% tested compatibility". Is it possible that something about the CPU/Board that is damaging the RAM? If a stick is failing memtest (it failed another test too called Windiag) is that definitive? It is bad for sure or board/cpu misreporting? Am I right in thinking memtest86 does cannot distinguish faulty RAM from faulty memory controller? Is there a test I can do to check if the CPU alone is faulty?
I don't know if this means anything to you guys but when I ran the prime95 (Blend) recently with both sticks in it failed straight away on 2 cores but went on running on the other 2.
One of my other frustrations is I don't know anyone else with am3 board or memory so swap things around.
Any suggestions for pinning this down would be much appreciated. Just don't assume my knowledge is as great as yours . But I do learn. I never knew v x a=w for example. And I now know how to change DDR Voltage in the BIOS - I had been expecting a sub-menu where Auto was greyed out and in fact it was just sitting there waiting for me to press + and -. Very embarassing that I spent hours trying to change this when the instructions on what to do were right there in the help column!

How to access a value from "List of Values" by giving a name?

I have a "List Of Values" defined in my BI Report. It comprises list of label-value pairs.
I have defined a parameter :p_Value for the above "List Of Values" defnition. this parameter is used in datasource sql defnition to filter the query results. I configured a template which has a table that shows all the parameters used for filtering query results. If I give <?$p_Value?> in the template then the parameter value is rendered on it. But I want the "name" of the parameter and not the value. Can anybody tell me how to access name of the parameter which refers to one of value in "List of Value" defnition?

option 1:
Can you get the value from the DB in the report sql ?
You have the code, inside the report query, if you can get the decoded value form that
option2:
create another paramater, LOV and query, and make it as hidden, and use the first :param_1_value in the lov query in the second param and decode the value.
Now , you can refer the :PARAM_2_value in template which will have decoded value.

How to access my macbook pro from a windows pc?

how to access my macbook pro from a windows pc?

Depending on what you mean by "access" the following may help:
File sharing: How to connect with File Sharing on your Mac - Apple Support
One way (and there are others) for remote control and remote access between Mac and Windows: http://www.teamviewer.com/en/index.aspx

In VB Programming code -- How to access the formula for suppressing a field

In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
   ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
   iloop = 0
   For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
           If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
               myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
               myTextObject.Text = "new field text goes here"
               mySection.SectionFormat.EnableSuppress = True
               ' Here is where I want to change the formula for the Suppression
            End if
            iloop = iloop + 1
    Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine

How to access and display a Web Service from a WSDL in JSP or JSTL ?

Dear All,
We need to access a Web Service which is hosted as WSDL How to access a WSDL file from JSP or JSTL, parse and display the SOAP response in JSP page.
Any simple example or URL as reference to an example will be useful for me.
It seems io tags of jakarta is able to send soap message, but how to display it in JSP.
Yours,
Sankar.B

Dear Sir,
Yes. I would like to know more about the Forte and how to consume WSDL file from JSTL. The following are my querirs.
1. How to connect the declared JNDI from a JSP page. i.e: the Datasource - ex: booksDS
2. We connect the Tomcat server using JNDI as jdbc/scott. But, if I give jdbc/scott in JSTL as datasource={jdbc/scott}, we could not able to connect. We use the following code in a JSP page to connect the DB from a JSP page. (Its quite easy to modify, so we use the connection in a JSP page.)
3. How to Consume a WSDL url from JSTL. Ex: If there is a URL : http://localhost/ws/MathService.asmx?wsdl OR http://www.xmethods.com/test/BabelFish
4. How to display the result. We tried via SOAP from io taglib of Jakarta, but gives us an SOAP (it also looks like xml) response. But, how to use the value from that soap response in IE client thru JSTL/JSP.
5. Whether this JSTL tool will be available with Forte Enterprise/Community Edition. If so EE, whats the price.
Please Reply Immediatly. We tried, trying, going to try to display a wsdl response, but not able to display in IE thru JSP/JSTL. But, weve tested the www.gotdotnet.com examples of asp.net web services, we are thru. Its quite easy it seems in .NET. But, we feel whether even there is not even one example in JSTL/ Java Web Services Dev. Pack to utilise a web service in full cycle. The example which uve given is thru servlets. We dont use servlets. Cos, its very easy to edit JSP pages, instead of compiling the serv. and using it.
I hope ull reply for all the above queries, since ur from SUN.
Expecting your fav. reply.
Yours,
Sankar.B

I have an old i tunes library but i dont know how to access it, when i plug my ipod into the new computer it will let me sync but then i lose all my music i have on my ipod. how can i transfer music from my ipod to my new itunes library?

I have an old i tunes library but i don t know how to access it. im trying to sync my ipod with my new itunes library but it wont let me. how can i copy the songs off my ipod to my new library.

You can transfer itunes purchases:
File>Transfer Purchases

How to access my configs n customization in my project

Similar Messages

Maybe you are looking for