How to access Oracle Using Dos Based FoxPro(2.5,2.6)

Hello Sir,
I need some clarification regarding the following question.
Q. How can access Oracle Database using Dos Based Foxpro of version either 2.5 or 2.6
Thanking you,
Kishore.P

Hi Alex,
the host and port depends on your network setup of your VM.
Do an ifconfig -a and see what IP adress your guest has.
With this IP address you should be able to access EM from outside your VM (but on the VM host, not from outside the network) with the same port.
Regards
Sebastian

Similar Messages

How to access Oracle Apps 11i forms using Vmware Player?

Hi,
I have installed Oracle Apps 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access Oracle Apps 11i forms from Windows XPP using Vmware on my OEL5 Server Desktop?
Thank's
Regard's
Rerry

Hi,
If you mean how to access eBusiness Suite from within the Virtual Machine, then you just navigate to the same URL you normally would. You may need to put the machine alias in your hosts file if you are referencing it via machine name rather than IP address.
If you mean that you want to load the form in forms builder (for example) then you need to FTP the form from server to client (as you normally would) and then open it in your client (XP virtual machine).
If you want to use Workflow Builder (as per your original requirement) then you need to ensure that the TNSNAMES.ora file in the Workflow Builder home has an entry for your instance on Linux, and then you should be able to connect to the database directly.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

How to access Oracle database using UNIX?

Hi,
Does anyone know how to access Oracle database Oracle 8i that is hosted on unix server via unix command line?
Thanks,
Willy

Well, Oracle probably has a command line tool. I think it's called sqlplus or somesuch. Check you Oracle docs.
Of course, given that this is a Java forum, it's remotely possible that you're actually asking about accessing the database from a Java program.
http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/

How to access Oracle Apps 11i forms from Virtual Machine(Vmware Player)?

Hi,
I have installed Oracle Apps 11i on native OS OEL5 Server and Windows XPP on Virtual Machine using Vmware Player on standalone same desktop.Now how to access Oracle Apps 11i from Virtual Machine(Windows XPP)?
Thank's
Regard's
Rerry

Hi,
Sorry my instance is PROD instead of TEST.
1)Renamed the sqlnet.ora and make the following change in the tnsnames.ora (SERVICE_NAME = PROD) to (SID = PROD) and tryed but same error.
2)Only one oracle homes on the cleint machine
3)The output of tnsping PROD
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>tnsping PROD 5
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 23-FEB-20
10 00:38:40
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=SHUBH.hnp.com)(PORT=1521))
TNS-12570: TNS:packet reader failure
Normal ping is ok from both host to guest and guest to host.
Thank's
Regard's
Rerry

How to access oracle appa tables

Can someone pls tell me how to access oracle apps tables
eg po_vendors of purchasing.

You can get them in this way select * from tab; this will give you a list of all the tables but if you are looking for a specific module like say Order Management then you could do it this way; select * from tab where tname like 'OE%'.

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How to run c using dos box in mac

I have installed dos box but have trouble finding how to open c++ using dos box. A blue screen of dos box appears what are we supposed to enter there to get in c++

No XML required, but you must put the class into a package.
Packages are folders with some files that identify whats in them, so you will end up with something like
yourWebbApp/classes/yourPackage/yourClass

How to access oracle eb-suit tables

Can someone pls help me how to access po_vendors table of oracle purchasing.

Using any SQL connection tool.
Ask your DBA to give TNS for your server.
Connect using SQL*Plus or Toad and
select * form po_vendors.

How to access Oracle 10g with COBOL

Hi there,
I didn't find anywhere better to post this, so I'm sorry if this is the wrong place.
I'm having major problems trying to find out how to access an Oracle 10g database with COBOL because I have no directions. I've never programmed anything that access a database before, and my first time must be in COBOL (wich is a language I started learning yesterday)
My teacher (who is not a nice person) gave us no directions at all, and when we ask her for it she is rude
"Do you know something called library? Or maybe, Google?"
So I am here, desparate, asking for anyone's help, for any diirections.. like
-How to access?
-Wich COBOL compiler to use? (free)
-Do I access the database with commands in COBOL? wich commands?
-Any tutorial around the web about this?
I have to deliver the full project in a month.. lol
Oh well...
thanks in advance!
Oscar

I do understand if she want us to be resourceful, but yes, she was tottaly irresponsible with us... but what is done is done.
Thanks alot for the information APC
I gave a quick look on the documentation you gave me and it is perfect, I now know how to connect to the database and somewaht use the commands.
But I looked for 2 more things and didn't find it, I'm sorry if I missed there
1) Do I need to instal anything? Something like a Pro*COBOL installer? I'm using Fujitso COBOL compiler, do I need to use other?
2) I looked at the commands on how to connect to the database but I don't understand something (again, sorry if I missed something)
LOGON.
MOVE "SCOTT" TO USERNAME-ARR.
MOVE 5 TO USERNAME-LEN.
MOVE "TIGER" TO PASSWD-ARR.
MOVE 5 TO PASSWD-LEN.
EXEC SQL
CONNECT :USERNAME IDENTIFIED BY :PASSWD
END-EXEC.
DISPLAY " ".
DISPLAY "CONNECTED TO ORACLE AS USER: ", USERNAME-ARR.
How does the CONNECT command know where to connect? I mean.. where do I put the adress of my Oracle Database?
That's all I could think about with this quick look, when I start implementing I will read the guide with all my attention.
Thanks again for the help
Oscar

How to Access oracle DB table through SAP..problem in code

Hello Guys
         I have to Access oracle table through SAP and need to create a report.
From Some source I got the following code . But it's not working , I am not able to update the table as well not able to access the data from table.
Can some one provide me the necessary help.
REPORT ZORACLE.
INCLUDE ole2incl.
DATA: con TYPE ole2_object,
rec TYPE ole2_object.
DATA SQL(1023).
DATA: BEGIN OF SPL OCCURS 0,
VAL(1023),
END OF SPL.
DATA: BEGIN OF I1 OCCURS 0,
F1(10) ,
F2 TYPE I,
END OF I1.
IF con-header IS INITIAL OR con-handle = -1.
CREATE OBJECT con 'ADODB.Connection'.
IF NOT sy-subrc = 0.
EXIT.
ENDIF.
CREATE OBJECT REC 'ADODB.Recordset'.
IF NOT sy-subrc = 0.
EXIT.
ENDIF.
ENDIF.
MDB connetion infomations ....
break-point.
CONCATENATE 'Provider=' '''OraOLEDB.Oracle''' ';'
INTO SQL.
CONCATENATE SQL 'Password=' '''prodx''' ';'
INTO SQL.
CONCATENATE SQL 'User ID=' '''prod''' ';'
INTO SQL.
CONCATENATE SQL 'Data Source=' '''sterlite''' ';'
INTO SQL.
CONCATENATE SQL 'Mode=' '''Share Deny None'''
INTO SQL.
MDB connection ...
CALL METHOD OF CON 'Open'
EXPORTING #1 = SQL.
Query (insert) statement ...
SQL = 'insert into ofusers values('.
CONCATENATE SQL '''Atul''' ',' '''121''' ')' INTO SQL.
Query run ...
CALL METHOD OF REC 'Open'
EXPORTING #1 = SQL
#2 = CON
#3 = '1'.
Query (select) statement ...
SQL = 'select * from ofusers'.
Query run ...
CALL METHOD OF REC 'Open'
EXPORTING #1 = SQL
#2 = CON
#3 = '1'.
Selecting MDB record into SAP internal table ...
DO.
    CALL METHOD OF REC 'getstring' = SQL
    EXPORTING #1 = '2' "Do not modify!
    #2 = 1 "Do not modify!
    #3 = '|' "Do not modify!
    #4 = '|'. "Do not modify!
    IF sy-SUBRC EQ 0.
        REFRESH SPL. CLEAR SPL.
        SPLIT SQL AT '|' INTO TABLE SPL.
        LOOP AT SPL.
          CASE SY-TABIX.
            WHEN 1.
              I1-F1 = SPL-VAL.
            WHEN OTHERS.
              I1-F2 = SPL-VAL.
          ENDCASE.
        ENDLOOP.
          APPEND I1. CLEAR I1.
        ELSE.
          EXIT.
    ENDIF.
ENDDO.
Result writing ...
LOOP AT I1.
WRITE: AT /1(10) I1-F1,
AT (10) I1-F2.
ENDLOOP.
connetion close & destroy
FREE OBJECT con.
FREE OBJECT rec.
Thanks in Advance
Swati Namdeo

Hi swati,
1. for this u will also require help of basis team.
2. these are the steps.
a) make an entry in DBCON
b) make connection string
(on the physical application server,
so that it can connect to secondary database)
(this will be done by basis team,
in which, they will specify the
IP address of the secondary database server,
the DATABASE ID, and the port number)
c) then using open sql / native sql,
we can use the secondary database connection,
just like normal.
d) if we use open sql,
then there must be Y/Z table on
sap as well as secondary database,
and the field names , their type all should be identical.
regards,
amit m.

How to access oracle with any unix user (like root)?

I installed Oracle 10g on Redhat Enterprise Linux 3.
I created one oracle user, and installed oracle in oracle users home directory. In oracle user I can access oracle very well. But I can not use oracle with other unix users like root. What kind of permissions I need to set to do so?

You should never try to connect to Oracle as root, but if you want to connect as any other OS user, you will need to run ChangePerm.sh in $ORACLE_HOME/install in order to do this. It may not be present until you upgrade above the base release (like 10.2.0.3).
Can not Logon To SQL*Plus as non-Oracle User: Libclntsh.So.10.1: Permission Denied
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=420083.1

How to access oracle forms from public ip through internet browser

Dear Team,
I have following setup:-
We are using oracle database 11gR2
Oracle Forms & reports : 11.1.2
O.S : Windows 7 Professional
I am currently accessing forms through local network through browser from server successfully.
Now I want to access the same forms through public ip through internet browser from a remote location and not from our local network.
I have also installed Xammp 1.7.7 apache server in the same setup computer.
Last time I tried to access oracle through http server but xampp http port was conflicting with oracle http server so i needed to disable oracle http server for xampp apache server to work, at that time i was not needing oracle http server, now I need both. Is there any workaround to this for oracle and xampp to work at the same time in the same setup, please let me know.
Can anybody help me to find solution for this issue.
Thanks in Advance.

You have to use two different -different ports for the both
use 8080 port for the Oracle http and another for another web server.
you can use proxy to filter the requests and redirect then to another port as per requirement.

How to access oracle R12 applications from windows client

Hi All,
I installed R12 oracle applications on Linux through VMWare and every thing was fine now. My database listener, database and applications are up and running. I installed Java and Mozillla and established a soft link on LInux but was not able to access oracle applicaitons from Uniix box. I was seeing if i can do it from windows client. Mine is windows vista and i pinged the ipaddress and its connecting but was not able to access applications from windows client and also from linux.
Can any one help me accessing applications from windows client and unix box

Hi;
I installed R12 oracle applications on Linux through VMWare and every thing was fine now. My database listener, database and applications are up and running. I installed Java and Mozillla and established a soft link on LInux but was not able to access oracle applicaitons from Uniix box. I was seeing if i can do it from windows client. Mine is windows vista and i pinged the ipaddress and its connecting but was not able to access applications from windows client and also from linux.
Can any one help me accessing applications from windows client and unix box1. Be sure you can ping your linux from your client
2. Be sure your selinux and firewal disable on linux machine
3. Add your IP and hostaname to your windows C:\WINDOWS\system32\drivers\etc\hosts file
4. Add your url to your trusted site on windows
5. Use IE7 or check below note to can use certified browswer and access EBS
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Regard
Helios

How to access ORACLE on SP3/SUN

Hi all,
We were using classes12.zip to access Oracle database.
It works fine on NT and used to be working on SUN, but with SP3 we get
the following error while obtaining a connection:
java.sql.SQLException: No more data to read from socket
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:82)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:402)
at oracle.jdbc.ttc7.TTCInBuffer.getByte(Compiled Code)
at oracle.jdbc.ttc7.TTIMsg.unmarshalSB1(Compiled Code)
at oracle.jdbc.ttc7.O3log.receive2nd(Compiled Code)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:168)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:93)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:146)
at com.netscape.server.jdbc.Driver.connect(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.createNewConnection(Unknown
Source)
at com.netscape.server.jdbc.ProxyEvaluation.createObject(Unknown
Source)
at com.kivasoft.rlop.ObjectPool.reserveObjectnative(Native Method)
at com.kivasoft.rlop.ObjectPool.reserveObjectnative(Native Method)
at com.kivasoft.rlop.ObjectPool.reserveObject(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getFromPool(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getConnection(Unknown
Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown
Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown
Source)
Any idea?
Can we solve this problem using classes12.zip?
Do we have to use another driver instead?
Regards,
Gyorgy

Hi Gyorgy ,
We have used Oracle Type 2 driver successfully on Solaris 8 iPlanet 6.0 SP4.
Basically you need to download the driver distribution from Oracle which contains 2 files
classes12.zip
libjdbc*.so
Copy the libjdbc.so to the $ORACLE_HOME/lib directory
During the JDBC Driver setup specify the $ORACLE_HOME/lib as your third party Native directory dir.
If you face problems even after this then open the iasenv.ksh and ensure that THIRD_PARTY_NATIVE_DRIVER_DIR_PATH contains the directory where you copied the .so file.
Stop Start your server and tell me if you still face the problem

How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?

Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel Gavinhos

Hi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos

How to access Oracle Using Dos Based FoxPro(2.5,2.6)

Similar Messages

Maybe you are looking for