How to access site gallery

I saved a subsite list view as a webpart to my site gallery so that I could display it on the parent site. I need to delete this webpart now but I cant seem to navigate to the site gallery page.

Please see this post to answer your question:
http://coreidng.blogspot.com/2008/01/sending-authorization-header-with.html
Mark

Similar Messages

  • How to access sites that require flash

    How do I access sites that require Adobe flash player on the IPAD2?

    You can't without installing another browser that supports Flash from the App store.  Search the app store.
    Just keep in mind, that like Flash players for mobile devices, these apps are less than optimal.  This is why Flash is not supported on iOS devices by Apple.

  • How to access site collection with a different name?

    Hello,
    I have a web application with an URL like http://testsite.  And, it has a site collection
    named http://testsite.
    Can I have another site collection using the same web application like http://testsite/site and use alternative access mappings to map it to http://companysite?
    Is this possible?
    Thanks
    Paul

    Hi  Paul,
    According to your description, my understanding is that you want to map the non-root site collection from
    http://testsite to http://companysite .
    For your issue, it cannot be achieved by using Alternative Access 
    Mappings.  For achieving your demand, you can create host-named site collection instead of path-based site collection.
    For more information, you can refer to the blog:
    http://technet.microsoft.com/en-us/library/cc424952(v=office.15).aspx
    http://blogs.msdn.com/b/russmax/archive/2013/10/31/guide-to-sharepoint-2013-host-name-site-collections.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Adobe Flash Player ... Apparently Apple does not recognize.  How to access sites that require it?

    Is there an app that will allow me to go to sites that use adobe flash player?  How to get around this?

    Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.
    Thanks for the tip about Puffin. I'll add it to my list of apps that can provide Flash support.
    Regards.

  • HT201240 I just got my Mac yesterday.  My kids want to access sites that need the adobe player.  When I try and download it asks for a password.   I do not even remember setting one up?  How do i find out what it is?

    I just got my Mac yesterday.  My kids want to access sites that need the adobe player.  When I try and download it asks for a password.   I do not even remember setting one up?  How do i find out what it is?

    FYI this is the legitimate Flash Player installer:
    This one is bogus:
    As X423424X wrote do not download it from any site other than the one he linked.
    Adobe does not require a password to download the Flash installer. Generally speaking passwords are not required to download software, unless you must register with the website so as to log in. In that case you should never use the same name and password you use to administer your Mac.

  • When I press the down arrow on the right side of my location bar and history is displayed, how can I get it to display history from most recently accessed site on down?

    When I click the down arrow on the right side of the location bar (without having typed a full or partial URL in, I am just clicking the down arrow) a history dropdown is displayed which shows 12 website URLs that I have visited, but there does not appear to be any rhyme or reason as to what is being displayed. How can I cause this dropdown to display sites visited from the most recently accessed on down? And how can I cause more than 12 URLs to be listed in this dropdown? Why I can't I scroll down through my entire history in chronological order from most recently accessed site?

    Upgrade your browser to Firefox 8 and check
    * getfirefox.com

  • How do i change the my sender name that is appearing in my email that's incoming? its correct on my iPhone email and my internet carriers email access site.

    How do i change my sender name that is appearing in my email that's incoming? it's correct on my iPhone email and my internet carriers email access site, but not on my imac email. for instance, when someone else gets my email...it says its from "mike Hoak".  I need it to be me (Karen), not one of my random contacts.  not sure how it even happened.

    Hi karen elizabeth I,
    I understand that you want to change the full name associated with your email account in Mail on OS X. Here is an article that will help you find this setting and adjust it:
    Mail settings you might need from your email provider - Apple Support
    http://support.apple.com/en-is/HT1277
    This setting can be found by going to your Mail Preferences, then the Accounts tab, then selecting your account. Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • How to access .asmx Web Service using JAVA? Newbie

    Hello Experts,
    Currently, I have a project where in I have to access a ,NET web service. It is made of C#. I just want to ask how will I start the accessing process? I made this simple equation on how my project is.
    Java Project + C#.Net Web Service = Integration
    1. Do i need to create a Web Service too for the Java Project? If yes, What are the necessary tools needed for the creation of this Java Web Service?
    2. The .NET Web Service is available online. (It is made by other people).
    3. Based on the equation, what is the equivalent technology for the + sign?
    4. Can you site a concrete example for accessing a web service?
    5. I'm new here. Totally I have no idea where to start.
    6. Thank you experts.
    Edited by: Benedict.Aluan on 05 30, 08 1:38 PM
    Edited by: Benedict.Aluan on 05 30, 08 1:39 PM

    Hello
    Thanks a lot for your help ...
    I am developing simple J2EE based web service client using IBM WSAD 5.1. I have used the following code to call .asmx web service in Java
    String url = "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl";
         String namespace = "http://tempuri.org/";
         name = request.getParameter("txtName");
         try
              System.out.println("In Internet Service");
              ServiceFactory factory = ServiceFactory.newInstance();
              Service serv = factory.createService(new URL(url),new QName(namespace,"TempConvert"));
              System.out.println("Got Service......");
              Call obj = (Call)serv.createCall();
              System.out.println("Got Call......");
              obj.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"");
              obj.setProperty(Call.OPERATION_STYLE_PROPERTY,"wrapped");
              obj.setTargetEndpointAddress(url);
              obj.setPortTypeName(new QName(namespace,"TempConvertSoap"));
              obj.setOperationName(new QName(namespace,"FahrenheitToCelsius"));
              obj.addParameter("param1",XMLType.XSD_STRING,String.class,ParameterMode.IN);
              obj.setReturnType(XMLType.XSD_STRING);
              System.out.println("Parameters Set.....");
              Object[] params = new Object[]{name};
              k = (String)obj.invoke(params);
              System.out.println("Result: "+k);
         catch(Exception e)
            System.out.println("Exception is : "+e);
        }But this code is throwing exception that
    Invalid Address "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl"I have also tried this URL with Java Proxy. But it showing the same error.
    Plz can u tell me how to access .asmx web service ?
    Waiting 4 reply.

  • Memory Problem on 790fx-gd70 - how to access DDR Voltage in BIOS?

    I have been getting memory related problems on a 6 month old system. I could only boot from one stick of RAM (Corsair TW3X4G1333C9A) but even then system was not stable for gameplay or stability test though this stick did pass overnight memtest. I returned the board, cpu and memory for them to test. They diagnosed faulty RAM and replaced. Well it worked OK for 24 hours then I started getting BSOD "PFN_List_Corrupt" and "Memory_Management" crashes.
    I tested the new sticks and one fails memtest after a few seconds with 2378 errors and the other, although it passes memtest with 20 passes, crashes out straight away on Prime95 Blend Test (i.e. the one that stresses RAM).
    They suggested I enter DDR Voltage manually rather than relying on Auto but no matter what I seem to enable this option is greyed out. Does anyone know which settings need changing from defaults so I can get at the voltage section?
    I have tried swapping around the dimms but they are all the same regardless so not a slot problem. Now of course, I don't see it as a RAM problem either unless I am the unluckiest person to keep getting bad sticks. So now I think maybe something on the board or CPU is causing damage to the RAM or at least causing it to mis-report. Could a fault in the memory controller be doing this and if so how can I test for this?
    At my wit's end here. Hope someone has some ideas - either on how to access DDR Voltage in the BIOS or get to the cause of my problem.
    Many thanks.

    OK thanks for explaining a bit more  .  This power unit did get some very good reviews in the sub $100 from many sites and from these I thought it would suit my needs. I have arranged to try a friend's 650w next week.
    I think I am maybe not being clear.  I have had the system running OK for six months. I had had no need to test the ram and didn't bother with stability tests at that stage.  I am not a gamer and use my machine more for video and graphics work.  One thing I did notice from the start was the couple of games I do have on (Call of Duty and Fallout3) would give occasional freezes.  I put it down to my now rather old hot GPU which I would get around to replacing in due course.
    Now the real problems started recently when I got round to replacing the stock cooler with a Titan Fenrir.  Trouble with this is it overhangs Dimm1 but in moving around the memory sticks I seem to have opened a real can of worms.  I could only get it to boot from one of the sticks.  This stick passed memtest but would crash out of prime95 and games would freeze within a couple of minutes. 
    Now, the retailers here in the UK told me to send back board, cpu and RAM.  They tested all 3 but they only replaced the memory and as you can see from my first post the memory related problems have continued.  The memory by the way is in Corsair's list as "100% tested compatibility".  Is it possible that something about the CPU/Board that is damaging the RAM?  If a stick is failing memtest (it failed another test too called Windiag) is that definitive?  It is bad for sure or board/cpu misreporting?  Am I right in thinking memtest86 does cannot distinguish faulty RAM from faulty memory controller?  Is there a test I can do to check if the CPU alone is faulty?
    I don't know if this means anything to you guys but when I ran the prime95 (Blend) recently with both sticks in it failed straight away on 2 cores but went on running on the other 2. 
    One of my other frustrations is I don't know anyone else with am3 board or memory so swap things around.
    Any suggestions for pinning this down would be much appreciated.  Just don't assume my knowledge is as great as yours  .  But I do learn.  I never knew v x a=w for example. And I now know how to change DDR Voltage in the BIOS - I had been expecting a sub-menu where Auto was greyed out and in fact it was just sitting there waiting for me to press + and -.  Very embarassing that I spent hours trying to change this when the instructions on what to do were right there in the help column!

  • How to access .html in tomcat

    I am very new to programming. I have created an html file (ThreeParamsForm.html) and placed it in development directoy. I am unsure of how to access that file. When i am typing http://localhost/ThreeParamsForm.html it is giving me HTTP Status 404 error. I have tried using servlets but they seem to be working fine. It is only htmls which i am unsure how to access. please help

    I think it may be considered bad practice to include all your web applications in the root directory.
    Instead, why don't you deploy each web application in it's own directory with a deployment descriptor.
    Your directory structure should look like this:
    [TOMCAT_HOME]
    --|\webapps
    ----|\MyWebApp
    ------|index.html
    ------|\WEB-INF
    --------|web.xmlYou'r web.xml file might read like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app>
         <context path="/MyWebApp" />
    </web-app>This so when you browse to your web site, you will go to http://localhost/MyWebApp

  • Access Denied Error while accessing "Site Settings Access requests and invitations"

    Hi,
    I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint  2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
    site collection account. So, what permission I have to give my regular account to access this page?
    Thanks, Pal

    Hello,
    Have you recently changed the Owners group of the site collection or removed the user from the original owners group? 
    The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created.  If this "regular account" is not part of that owners
    group, the user will receive access denied.  Site Collection Admins always have permissions for the Access Request List.
    A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us.  By giving the correct group or user the permissions to this list, the users will not receive
    the Access Denied issue anymore.  
    Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
    was.  Below are additional steps to restore full functionality.
    1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
    is set correctly.  (There is a group selected)
    2) Add user to that Owners Group.  (Issue may be resolved at this step if the site collection Owners
    Group was never changed, if not continue to next step.)
    3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
    group as Full control on Access Request list Permissions.
    Let me know how this works out for you.
    - Shpendi Jashari

  • I am using a verizon email address and microsoft office for mac outlook program to manage my emails.   Does any one know if  the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

    I am using a verizon email address and microsoft office for mac outlook program to manage my emails.   Does any one know if  the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

    This is the Microsoft forum site that parallels what Apple has:
    Office for Mac forums
    It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

  • HOW TO ACCESS MY VISION INSTANCE GLOBALLY?

    Dear legends,
    Since i have installed a VISION INSTANCE 12.1.1 and i have a domain name, and my entries as follows OS : ORACLE LINUX 5.7 x86_64
    OUR ORGANISATION'S IP EXAMPLE
    IP FOR THE MACHINE USING : 192.168.1.1
    SUBNET MASK : 255.255.255.0
    DEFAULT GATEWAY : 192.168.1.10
    PRIMARY DNS : 50.51.52.53
    SECONDARY DNS : 300.200.100.1
    vi /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    BOOTPROTO=static
    BROADCAST=192.168.1.xxx
    HWADDR=xx:xx:xx:xx:xx:xx
    ONBOOT=yes
    TYPE=Ethernet
    USERCTL=no
    IPV6INIT=no
    PEERDNS=yes
    IPADDR=192.168.1.1
    NETMASK=255.255.255.0
    NETWORK=192.168.1.0
    #GATEWAY=192.168.1.10
    vi /etc/sysconfig/network
    NETWORKING=yes
    NETWORKING_IPV6=no
    HOSTNAME=devl.rel.net -- example hostname
    GATEWAY=192.168.1.10
    cat resolv.conf
    # Generated by NetworkManager
    search rel.net
    nameserver 50.51.52.53 -- example DNS 1 or primary DNS
    EITHER i give or edit all the above mentioned files to access my EBS home page using the url http://devl.rel.net:8000/ i cant able to access the page but other sites can be browsed, since at the time of installation of oracle linux i have given the hostname as devl.rel.net and our domain name is rel.net.
    Please can anyone help how to access my EBS globally. I have accessed the EBS login page for the first time at the time of installation only after that i cant able to access. Instance is working fine, everything has been started. I have pinged the same url ping devl.rel.net it says 0% packet loss from a terminal.
    Lots of thanks and Great help would be appreciated more.
    With Regards,
    Karthik Singh

    Hi,
    As per your request I have posted here HOW TO ACCESS MY VISION INSTANCE GLOBALLY?
    Thanks a lot

  • How to access java method in JSP

    Hi all,
    I need to access java class (abstract portal component) method doContent() in a JSP which is under PORTAL-INF/jsp folder.
    I did
    <%@ page import = "com.mycompany.Aclass" %>
    <%com.mycompany.Aclass a = new com.mycompany.Aclass (); %>
    Aclass is coming as autofill/prepopulated with cntrl+space
    Till this time, it is working. no errors. But when I do
    a.
    a. (a dot) no methods are populating (autofill..cntrl+space) or If I forcebly add method a.doContent(req,res)... at runtime its giving error.
    It's not only with doContent method... Its with any simple methods in that class or any other class.
    (Other than doContent method in the APC java class are prepopulating/autofilling but giving error in runtime)
    Can anyone help me... how to access java method in JSP.
    I already gone through many SDN forum post... and implemented too---but no use I refered below forum thread
    Retrieve values from Java class to JSP
    URGENT! How to call a java class from JSP.
    Calling a java method from jsp file -
    this thread is same as my issue
    Thanks,
    PradeeP

    1st. The classes must be in packages. 2nd, the package that they are in must be under the WEB-INF/classes directory. 3rd Look on google and/or this site for web application deployment

  • Cannot access photo gallery

    Have had phone for six months, no problem accessing photo gallery.  Now, when I click on the gallery widget, the gallery will not come up.  I have turned phone off and on, still will not work.  Thoughts?
    Also, how do I know if the Gingerbread update is on our phones?  My wife and I have been experiencing some random issues the past few days---issues we didn't have previously.
    Thanks.

    re: Photo Gallery --  if launching of the Gallery just closes, it is most likely due to a corrupted file in the Gallery. You can do a Search in this forum for other suggestions and methods to fix it ... but when I had this problem, I just plugged into my computers USB port and MOVED my images from the phone to my computer, then 1 by 1 viewed them - looking for the culprit. Thn copied the remaining ones back - or just the ones I really wanted.
    Also, you can download the free app called 3D Gallery - it seems to be able to deal with corrupted images better than the stock gallery.
    Good luck.

Maybe you are looking for