How to access TC behind a d-link dsl524 router?

I guess I have to do some port forwarding, right? Any practical help, I have no idea how to do it.

Welcome to the discussions!
If your TC is connected behind the D-Link router, your TC would normally be configured in "bridge mode". You can check this as follows:
Airport Utility > Manual Setup > Internet icon > Connection Sharing = "Off (Bridge Mode)
When the TC is in bridge mode, port forwarding is not available. You must forward ports from your D-Link router.
Please advise on your findings.

Similar Messages

How to access a Plan created in Enterprise Link Design Studio

I have created a Plan in Design Studio of Enterprise Link and i would like to put it in a report which i am planning to create using BAM active studio. Can some body tell me how to access things created in Enterprise Link from active studio/architect.

hi
You have to create a plan to connect to the external message source, get the message and parse , and finally put it in the ADC data object (user created object). After this step, all your incoming messages will be in ADC data object. Only after getting the message into ADC object, you can use this object - you can create reports using this object.
I have a few questions
a) Can you identify your company. b) Have you taken the BAM training course c) These steps are given in training documents in lab 2-6 step by step.
Do let me know if you need any help, contact directly at [email protected]

Logical database PSJ: How to access and link tables inside that???

Hi,
I have a requirement like :
I have to write one report which will display project statuses (PSmodule) using the LDB PSJ.. I am using LDB because I neeed dynamic selection screen.
I need to acees the data from table like 1. PROJ, prps_r and JCDS under the LDB PSJ.. but when I found the hirarchy of these table in the LDB , then all 3 tables are at same level.
then How to access and link data from theses 3 tables using GET and LATE command.
I did like below, but wrong number of records are coming
START-OF-SELECTION.
GET proj.
GET prps_r.
GET elm_ps .
GET jcds.
can anyone tell me, what 's wrong here.
points will be rewarded
for proper answer.
Regards,
Mrunal

hi ...get is like a loop in ldb. then if you use the 3 get statements then it will loop with in a loop with different data..

How to access the LOB objects through database links??????????????

How to access the LOB objects through database links??????????????

Hi
See:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:52297289480186
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5322964030684
And you also might want to get a new keyboard, your '?' seems to be stucked....

I can't access to my apple ID link in my iPad. How can I fix this?

I can´t access to my apple ID link on my iPad. The link that appears at the top of the screen when you go into Settings - iTunes & App Stores. I want to change my Apple ID but I´m unable to access this link. I can´t access neither from the itunes store page, where it appears on the bottom left corner.
Can somebody help me to fix this?

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
If you can't get your password reset via http://iforgot.apple.com (do you remember the answers to your security questions ?) then you will have to try contacting Support in your country, they should be able to reset your password of you.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

How to access and control a Windows 7 computer from a Mac - long distance?

I bought my parents their very first computer. They are 2000 miles away in another state. Currently I have the computer in my possession to "set-up" everything so it is as seamless as possible when they receive it.
It is an HP with Windows 7. I have a mac. I would like to remotely access their Windows machine to help them when they need it - to be able to control theirs to show them how to do things and to do it for them if need be.
Thank you for your time
Pattie
This is a new thread. If you want to see the original info it is at this link:
http://discussions.apple.com/message.jspa?messageID=12832917#12832917

You are only as secure as web browsing to the LogMeIn website is (which appears to use HTTPS). If your login on that site is compromised, they will have a list of your computers that they can attempt to connect to. As long as you don't save the login credentials, they would then also need to know what username and password to use to connect to the computer. Granted, a little social engineering, and they could probably get some good ideas what to try for those, but if you chose to make your computers secure with complex and hard to guess passwords then it should be fine.
I've been using LogMeIn from my Mac to my mom's Windows XP system from July 2009, and to my wife's Thinkpad running Win 7 since Oct 2009. None of the computers involved have had any security issues at all, let alone any caused by LogMeIn. For my wife's PC, it sits behind our NAT Firewall in our LinkSys Router (although I did have it behind a CheckPoint VPN Edge router for a while). My Mom's PC sits behind a Netgear Router providing its NAT Firewall. When my Mac isn't at home, it's generally behind that CheckPoint VPN router at my office now. It all works nicely from behind one router to behind another. The Piece that you install on the PC will log it into the LogMeIN website and that is how it gets through the router to the PC. You login to the website, select the PC to control, then login to that PC.

How to access a web service(.wsdl) from portal component.

Hi ,
Is there any document/tutorial available on how to access a webservice from portal component ?
I have found this linkhttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/g-i/how to access a web service.htm...
but the urls in the link are not working...
i want to know the steps to access webs service and sample code if some body has already done that..
Thanks for the help.
Lakshmi

Hi Lakshmi,
See the links below:
http://help.sap.com/saphelp_nw04/helpdata/en/f0/581140d72dc442e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a3/918340d990ce62e10000000a155106/content.htm
Hope this helps.
Regards,
Pooja.

HT4436 Is there a way to connect my iCloud acct. so that my regular email address is my user name instead of the .me email address? I don't even know how to access my very old .me address.

Anyone know if you can replace your .me email address for your regular email address? I'm trying to set up my iCloud acct. on my iPhone but the default email adddress is my .me email which I never used and do not know the password for. When I use the Forgot Password link, it sends to my .me email address
and I never used it and don't know how to access that address. Arg. Anyway to clean slate and permanently eliminate the .me thing?

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

Please can someone tell me how to access my iTunes library on a pc I no longer have and transfer it to another laptop? Thank you

Hello Please can anyone tell me how to access and transfer my iTunes library from a pc I no longer have to another laptop? Thank you

You cannot. Your library is on that computer. If you do not have that computer, then you do not have the library.
Have you failed to maintain a backup copy?
If so, not good, you can redownload some iTunes purchases in some countries. Click Purchases under Quick Links in the iTunes store.

How to access values in process request

Hi guys,
Wondering if some one could shed some light on the process of getting values in PR. The situation is that i have linked two pages and both have dateFrom and dateTo fields, the values of the fields are being copied across to the other page automatically. I would like to understand how.
And the other is How is, how to access those values in Process Request. I want to use those dates as criteria for populating data when the user first opens the page.
Any insight would be highly appreciated
Regards,
Shoaib.

The situation is that i have linked two pages and both have dateFrom and dateTo fields, the values of the fields are being copied across to the other page automatically. I would like to understand how.
If you have linked the pages, you would know how the values from one page is being transferred to the other page, this cannot happen automatically, you either must have 1. Passed them through URL
2. Passed them through Session
3. Have the same VO in both the pages and retaining the AM from P1 to P2.
4. Requering the DB in P2 after saving the values in P1
There could be number of ways you have done it.
And the other is How is, how to access those values in Process Request. I want to use those dates as criteria for populating data when the user first opens the page.
Depending on how you passed the values from P1 to P2, the method of getting these values in P2 PFR would vary, but in most cases pageContext.getParameter("paramname") should workThanks
Tapash

How to Access table in SAP

Hi Gurus,
Actually I am new to SAP and was wondering if somebody could tell me how to access a table in SAP where the relavant data is being stored.
e.g. If I want to check table VBAK, what wouldbe the menupath/t-code?
Thank you.
Juhi Singhania

Hi Juhi,
Since you are new to SAP you might want to have this link handy.. it has several useful information including the tables list
http://www.erpgenie.com/abap/tables.htm
http://www.erpgenie.com/saptech/transactions.htm
http://www.sap-img.com/general/find-the-list-of-sap-transaction-codes.htm
http://www.sap-img.com/basis/useful-sap-system-administration-transactions.htm
Thanks
Janani
award points if helpful

Getting error while accessing a webpage by using link local address of ipv6

Hello,
I want to access my login.jsp by using ipv6 address.
when i am accessing my web page by using loop back or localhost6(like the following) it is working.
http://[::1]:8080/test/login.jsp //for loopback
http://localhost6:8080/test/login.jsp
But when i am accessing my webpage by using link local address as following i am not getting my web page.
http://[fe80::201:6cff:fe0f:d7ae%eth0]:8080/test
or
http://[fe80::201:6cff:fe0f:d7ae]:8080/test
For the above case is there any solutions????

Whatever i have mentioned these are correct. My ipv6 address is also correct.From browser only i am accessing.>
Not a Java issue, then. Your problem I'm afraid.
But how do you know they're correct? Given that one of them isn't working, I'd triple check it if I were you.

How do i get photos from my old phone(which i no longer have) on to my new phone i backed them up i dont know how to access them though

how do i get photos from my old phone(which i no longer have) on to my new phone i backed them up i dont know how to access them though

Hi Hannah,
Welcome to Apple Support Communities.
The article linked below will walk you through restoring the iPhone from a previous iCloud or iTunes backup.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Restore from an iCloud backup
If you have a new iOS device, or if you need to restore your iOS device to resolve an issue, follow these steps.
Follow the initial steps in the iOS Setup Assistant (select your language, and so on).
Select Restore from iCloud Backup when the assistant asks you to set up your iPhone (or other iOS device).
Select the backup you created earlier.
You can restore a backup only by using the iOS Setup Assistant.
If you've already set up your device, you can erase all current content to go through the iOS Setup Assistant again. Tap Settings > General > Reset > Erase All Content and Settings. Do this only if you already have a backup, because this step will remove all current content from your device.
Use iTunes
Restore from a backup
If you have a new iOS device, or if you need to restore your device to resolve an issue, follow these steps:
Connect your iOS device to the computer that has your backup.
Make sure this computer has the latest version of iTunes.
Choose File > Devices > Restore from Back up.
If you're using iTunes 10.7 or earlier, right-click the device from the list and choose Restore from Backup.
-Jason

How to access tables/views of an external database provider..

After much trouble I finally managed to setup a second Database Provider that doesn't display the "0 out of 0 connections are good" error by filling in the "Configuration Class" field with "intradoc.server.DbProviderConfig".
But now the problem is actually accessing the tables/views in my newly configured external database provider...
In the Configuration Manager applet when I try to add a new Table or View it only lists the tables contained in the schema of the SystemDatabase database provider (the original one), I've tried running Queries via components trying stuff like SELECT * FROM provider_name.table_name and other similar but obviously it doesn't work...
So... with that said, I just want to know how I access tables or views in my "supposedly" well conected (15 out of 15 connections are good, no errors on the Test Query) Oracle external Database Provider - After searching I was unable to find any information regading any post-provider-setup actions in the Content Server documentation - Does anyone know how to do this?
On a side note, if the database is SQLServer instead of Oracle, with the same configuration and apparently no errors on the database side (other clients access it well) the Query Test of the new database provider returns the following error:
"The provider 'TestSqlSrv' is in error. Unable to create database connection for JDBC:ODBC:SqlSrv. Unable to create result set for query 'select * from dummy'. Invalid Fetch Size Unable to create result set for query 'select * from dummy'. Invalid Fetch Size java.sql.SQLException: Invalid Fetch Size".But I won't even go there yet.... for now I would settle with just knowing how to reference information in the Oracle external database provider...
Message was edited by:
user602700

if you are able to, pick up Bex Huff's book the Definitive Guite to Stellent Content Server Development (amazon link: http://www.amazon.com/Definitive-Stellent-Content-Server-Development/dp/1590596846/ref=sr_1_1?ie=UTF8&s=books&qid=1196365101&sr=8-1)
chapter 11 is all about this.

How to access the webservice in portal component

hai
how to access the webservice in portal component.
anyone knows give the solution
Rds
Shanthakumar

Hai
Please check this link.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/connectivity&
Regards

How to access TC behind a d-link dsl524 router?

Similar Messages

Maybe you are looking for