How to access the BIOS on Satellite A500-1G2

Hi
Could you tell me how do you enter the BIOS. I have A500-1G2 laptop. I've upgraded the Bios and i can't get in. Please help me.
Czarek

Hi
You can access the BIOS pressing F2 button immediately after the notebook has been powered up (after power button has been pressed).
You can press F2 several time to be 100% sure that this worked

Similar Messages

  • How to access the BIOS and Satellite L40

    I need to go into the BIOS. How can this be accomplished?
    Cheers,
    Chris

    > Booting from the Win XP CD does not work, regrettably. Something with the SATA driver. Looks like a play to force end users to buy Vista.
    BIG NONSESE!!!!
    You need SATA drivers before you would continue with XP installation!
    I think you should read some threads here before making some assumptions
    On the Toshiba page you will find a Intel Storage Manager
    This package includes the SATA drivers!

  • How to access the BIOS setting for H330 to verify VT setting?

    How to access the BIOS setting for H330 to verify VT setting?

    Hello Rho2019 and welcome to community,
    To enter into BIOS, Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to access the BIOS on the GS70 2PE STEALTH PRO

    Hi all,
    I recently purchased the GS70 2PE STEALTH PRO, and I need to access the BIOS to enable hardware virtualization, but I am unable to do so?
    The laptop starts up in < 3 seconds, and I have tried many different keys with no luck.
    How does one access the BIOS?
    Regards,
    Marius

    if your power it on by closing and opening laptop then thats only sleep mode to fully enter bios power windows fully off through windows 8 then press power button and once MSI logo appears spam DELETE button like mad untill you see bios

  • How to enter the BIOS in Satellite C50-A006

    Hi!
    I wanted to enter BIOS to select boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried googling, also no luck.
    Please help.
    Thank you!

    Hi
    At first you must perform complete shutdown. After doing this you can start machine and enter BIOS settings.
    How to perform complete shutdown you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try it please.

  • Re: Satellite Pro A120 - Cannot access the BIOS and install the Win XP

    Hello
    Ive a Toshiba Satellite Pro A120, Ive installed a Linux operating system on it, and uninstalled it.
    When I come back to the Windows XP OS, I could no more access the Bios (event the i press F1, F2 ) and the computer could not boot the windows XP SP2 CD too but it boots the windows XP 2001 CD
    Any one could help me please

    Thank u jeffrey for your help, ;;;;;or the BIOS i'll try later....for the boot, i tried many times,,,, i screen to shoose the boot appears, and when i select the cd boot it works with the windows xp 2001 SP1, but with windows SP2 it doesn't boot,,,, even though i tried many cds of win sp2 ,,,, so each time , to install windows sp2 , i have to install SP1 then upgrade to SP2 and it takes much more time... i precise that few months ago it was proprly working with the WIN XP SP2 CD
    best regards

  • How to enter the BIOS settings on my Satellite L50-A-k4W?

    Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

    At first you have to perform an complete shutdown.
    Here an HowTo:
    http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
    Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

  • Satellite 1400-103: Cannot access the BIOS Setup

    I'm having problems getting into the BIOS setup. At the 1st bootup screen I press ESC key then message appears Check system. Then press F1 key. Once key is pressed it doesn't take me to BIOS setup and laptop reboots. Any help will be much appreciated.
    James

    No it doesn't. There is a problem with the OS and I was gonna do a repair using an XP disk. I have been trying to boot from cd rom by pressing C button and I've also tried pressing F12 key to change boot device. The teacher whose laptop it is has put a bios password on bootup but I'm assuming this shouldn't affect bootup or accessing the bios setup. I'm not sure if it's a supervisor password or administrator password.

  • Accessing the BIOS - Post Windows 7 Install

    After I installed Windows 7 I lost the ability to access the BIOS through pressing the Lenovo Care button. How do I retain this ability?  This is on a Lenovo SL500 Thinkpad.
    Message Edited by Emanuel on 06-16-2009 10:09 AM

    Hi Emanuel:
    Have you installed the "System Interface Driver" from the Lenovo Windows 7 beta downloads page?  I think that this is the driver that enables the blue Lenovo button.
    If that doesn't work, you can still access the BIOS setup by tapping on the F1 key while the computer is starting up.
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • In VB Programming code -- How to access the formula for suppressing a field

    In VB Programming code -- How to access the formula for suppressing a field
    I am using Crystal Reports 2008 v1
    Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
    My problem is that I am unable to access the formula used to dynamically suppress a field.
    The following code is working:
    mySections = rd.ReportDefinition.Sections
    For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
       ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
       iloop = 0
       For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
               If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
                   myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
                   myTextObject.Text = "new field text goes here"
                   mySection.SectionFormat.EnableSuppress = True
                   '  Here is where I want to change the formula for the Suppression
                End if
                iloop = iloop + 1
        Next
    Next
    I can not find any reference to the actual suppression formula in the SDK help file.
    Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten.  The results of the formula determine the suppression.
    Is there a way to reference this formula.  I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

    Hello, Mark;
    If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
    If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
    Elaine

  • How to access the photos on icloud

    hi
    how to access the photos which i saved in i cloud, from my iPhone 5,
    Note: i do not use any PC. and i only have purchased 20 GB of space on an annual sub. so as to save my photos, and create space in my phone and now i am unable to access it,
    please advise
    thanks
    xxv

    There isn't really a way to "save" photos to iCloud currently with non-beta software.
    iCloud is involved with photos in 2 ways -- backup and Photo Stream.
    Backup of an iOS device includes Camera Roll photos but they cannot be viewed at iCloud.com -- the backup can only be used when doing a restore of an iOS device.
    Photo Stream photos also cannot be viewed at iCloud.com; Photo Stream is designed as a method of transferring photos from one device to another and is not designed to store the photos. More info http://support.apple.com/kb/HT4486
    There is a new feature -- "iCloud Photo Library" -- coming sometime after the iOS 8 release next week: http://www.macrumors.com/2014/09/12/apple-demotes-icloud-photo-library-beta/

  • I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

    I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
    HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
    OS X version 10.9.2

    Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
    Now
    Have you tried to repair the disk yet

  • How to access the global data in user exit.

    Hi All,
    How to access the global data in user exit.
    the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
    this document number is not imported to the FM i needed to access for frther proceed.
    Thanks in advance.

    Hi,
    See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
    [SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
    This will help you to solve your problem.
    Regards
    Karthik D
    Edited by: Karthik D on Dec 2, 2008 4:18 PM

  • I have 2 game centers on 1 Apple ID and it willl only access 1 of them may someone tell me how to access the other one

    I have 2 game centers on 1 Apple ID and it will only access 1 of them may someone tell me how to access the other one

    You don't have to use the same ID for iCloud as you do for purchasing.  You can just set up iCloud using your other ID. 
    If your have already have another account, you have to go to Settings>iCloud, tap Delete Account, choose Keep on My iDevice when prompted, set up your new account with the other ID, turn on your iCloud data syncing and when prompted, choose Merge to upload your data to the new account.

  • Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Did you have the phone set to backup things to the One Drive on Microsoft servers?

Maybe you are looking for

  • Compatibility Mode for itunes 10.3 due to error 2096

    i have uninstalled and reinstalled itunes several times and still get the "error 2096" message. followed all steps as directed for removal. does this have anything to do with the compatility mode? should it be checked or unchecked? can anyone help?

  • DOCTYPE setting changes during parsing

    The DOCTYPE setting is updated during the parsing of a document. The XML document starts with <?xml version = '1.0' encoding = 'UTF-8'?> <!DOCTYPE SHOW_WIPSTATUS_001 SYSTEM "176_show_wipstatus_001.dtd"> <SHOW_WIPSTATUS_001>      <CNTROLAREA> The path

  • Dropping like flies.

    My G4 iBook, (was) running 10.4.8, won't boot. I get the grey screen with the apple logo and the water wheel and very occasionally I get beyond that to a blue screen with no interactivity, and even more rarely I get the list of user accounts appear,

  • Is there a way to put comments in an .icd file?

    I think I know the answer to this, but is it possible to put comments into an .icd file?  I create many ICD files for Camera Link cameras (using both the NI Camera File Generator and by editing the text) and it would be very helpful if I could place

  • Some Directories Aren't Recognized

    For some reason, when I choose to "Add Folder to Library," it doesn't read all the files in the directory. Instead, I have to go through each individual sub-directory to make sure the files in them are put into the library. Anyone else have this prob