How to access the power management option?

I cannot find the power management option in my general settings??? how to find it???

Hmm... have you searched the app store?  I don't recall ever seeing such an app, but it might be out there.  With the sandboxing that goes on, such an app may be impossible to write, but who knows...

Similar Messages

  • G510s/wind​ows 8.1 sleep problems (power management options & BIOS do not correct it)

    hi there,
    suddenly seemingly for no reason, the sleep function of my machine no longer works properly.  when the machine goes to sleep, it either shuts itself off or goes into unwakable hibernation, in which case i must shut  the machine off improperly and crash my open files.  the fan also stays on non-stop when it is in unwakable hibernation. 
    i have changed the power management options numerous times based on suggestions i have read about or been told via lenovo support, and in each case, the sleep function works properly the next 5 times or so, but then the same old problem arises again.
    in addition, i now receive pop-up boxes every time i turn the machine on that indicate that the start menu has been updated, and it asks me if i want to install skype, etc.  this is now a daily occurrance, and i wonder if it is related to the sleep problems, or if this is a new unrelated glitch.
    please tell me how to fix the machine, keeping in mind that i have already changed the power settings numerous times to no avail.  in addition, my BIOS is and always has been up to date, as this is a brand new machine.
    thanks very much in advance,
    tamara

    After upgrading to Windows 8.1 did you install the appropriate chipset driver and IMEI software?
    Which BIOS version did you install?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to access the Document Options dialog box to select display properties?

    How to access the Document Options dialog box to select display properties (e.g. smartcut ) for a selected document to
    be viewed in the Workspace.
    regards

    Preferences --> General --> Reset all warnings.
    Mylenium

  • T430s Error in how the Power Manager icon displays in system tray at bottom of screen

    The icon for the Power Manager in the Windows system tray in the bottom right area of the screen is cut off.    It's basically displaying itself too low on the system bar.  Please see picture attached:
    Does anyone know how to fix this?  I've tried updating to the latest version of Power Manager (v 6.40) but that didn't help.  I'm running Windows 7 Professional 64-bit.
    Thanks.

    Hi, wesaturn
    Have you tried updating all other driver updates available for your system, such as the BIOS and video drivers? They can all be found here if not. 
    Also, how long has this been occurring? And has it ever displayed properly?
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • The option to sync apps is no longer available in iTunes, though it used to be. Can anyone tell me how to access the sync apps button please?

    Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.

    You have to connect and select iPhone in computer iTunes Sidebar.
    If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
    Take a look at this screenshot on updating apps.

  • How do I access the clean start option?

    Hi people, looking for someone kind enough to let me know how to access the "clear start" function. Thank you =)

    This one?
    Regards,
    Colin R.

  • How can we access the 'print booklet' options in CS6 without a printer online?

    I cannot access the print setup option in ‘print booklet’ in CS6 to change the paper/image orientation from portrait to landscape. I am trying to save it as a .ps file so I can take a print ready pdf to the printers. But the resulting pdf that saves now is cropping my A4 (to be A5 after stapled) 2up saddle stitched booklet. As in the spread stays landscape, but the A4 paper in portrait. Can anyone help me please?
    *sooooo frustrated*urgent*

    thats the fix i was  loooking for!!!! i found it just bedore i saw your reply though. but thanks a bunch!!!!!!!!!
    for anyone else who might be looking for the same thing this video helped me and has a link to file you need  - http://www.youtube.com/watch?v=D0Ogk-uBHls

  • I can't access the Startup Manager

    I hit the power key, hear the 'chime,' and press the option key. I hold it down. Three minutes later, the screen is still black. I have successfully accessed the Startup Manager in the past with no issue. It simply won't happen, today. I have Snow Leopard and apparently Maverick installed - each on half of the hard drive. I had normally simply booted to Snow Leopard (which I need to run Final Cut Pro - not Final Cut X) and taken care of business. Since upgrading to Maverick from Lion, the computer has defaulted to booting into Maverick. I have used Startup Manager to boot into Snow Leopard. That simply won't happen today.

    I hit the power key, hear the 'chime,' and press the option key. I hold it down. After answering this question, I am going to try to restart after selecting the Startup Disk in System Preferences - hopefully, that will work.
    As for the Disk Utility - yup, both partitions show. One is Macintosh HD (with Maverick), the other is Macintosh HD SL (get it? SL for Snow Leopard :-D ) At any rate, even if the SL partition didn't show, shouldn't the Startup Manager open rather than the black screen? I help the option ket for a solid 5 minutes on the recent attempt with still no success...
    Please, don't take my snippy response as an attack to your question. I am simply frustrated with this situation and need a vent...

  • ThinkVantage Access Connections, Power Manager, and Toolbox all crash on startup

    I have a SL 500 with factory Vista , updated to SP2 and the current versions of the thinkvantage components.
    Access Connections has always been very buggy of this machine (I guess the battery monitor has been as well), When I attempted to update them this is where I ended up.
    Also just installed new .net framework 4 as well.
    thanks for any help 
    ian
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: CLR20r3
      Problem Signature 01: pcdrcui.exe
      Problem Signature 02: 6.0.5514.59
      Problem Signature 03: 4c0eb0cb
      Problem Signature 04: wpfview
      Problem Signature 05: 6.0.5514.59
      Problem Signature 06: 4c0eb0cb
      Problem Signature 07: f8
      Problem Signature 08: 9c
      Problem Signature 09: System.IO.FileNotFoundException
      OS Version: 6.0.6002.2.2.0.256.6
      Locale ID: 1033
    Description:  Stopped working
    Problem signature:  Problem Event Name: CLR20r3  Problem Signature 01: pcdrcui.exe  Problem Signature 02: 6.0.5514.59  Problem Signature 03: 4c0eb0cb  Problem Signature 04: wpfview  Problem Signature 05: 6.0.5514.59  Problem Signature 06: 4c0eb0cb  Problem Signature 07: f8  Problem Signature 08: 9c  Problem Signature 09: System.IO.FileNotFoundException  OS Version: 6.0.6002.2.2.0.256.6  Locale ID: 1033
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: PWMUI.EXE
      Application Version: 1.0.0.0
      Application Timestamp: 4bea35c2
      Fault Module Name: KERNEL32.dll
      Fault Module Version: 6.0.6002.18005
      Fault Module Timestamp: 49e037dd
      Exception Code: e0434f4d
      Exception Offset: 0003fbae
      OS Version: 6.0.6002.2.2.0.256.6
      Locale ID: 1033
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Access Connections.exe
      Application Version: 5.3.0.0
      Application Timestamp: 4bcff8d0
      Fault Module Name: KERNEL32.dll
      Fault Module Version: 6.0.6002.18005
      Fault Module Timestamp: 49e037dd
      Exception Code: e0434f4d
      Exception Offset: 0003fbae
      OS Version: 6.0.6002.2.2.0.256.6
      Locale ID: 1033

    Hi...
    I too have  got the same problem...
    i dont know when it started as it was running fine....earlier..
    In Access Connections the 'right click' menu on the taskbar runs just fine ..but the Access Connections program crashes on opening..
    The wireless status also runs fine
    Same is the case with Power Manager
    Shows the right battery status and the right click menu runs fine..but the Power Manager application crashes
    Like by the Lenovo toolbox too crashes
    I am using Lenovo X100e with win 7 starter edition
    i had .net framework 2 installed ...3.5 doesnt install and.net framework 4 installed after the problems started ...but still the problem hasnt stopped

  • How to access the gui through a NAT device

    Hi
    I have to access the management GUI over a NAT IP. So the browser is not accessing the configured managment IP. How can this be realized?
    Unfortunately the programmers wrote the HTML code with absolute addressed links instead of using relative links.
    Example HTML code excerpt from the web gui:
    <script src="
    https://wsa.test.local:8443/scfw/1y-7.1.2-020/yui/animation/animation-min.js"></script>
    Good code shoul read like:
    <script src="/scfw/1y-7.1.2-020/yui/animation/animation-min.js"></script>
    The second code doesn't take care on which hostname/IP nor port the web gui is seen from the client. The browser just adds hostname to the beginning of the URL as it was used to access the starting page. So a NAT or even PAT on the way to access the box has no influence on the usability.
    Any ideas how to circumvent that problem?

    We found out that this seems to be a limitation of the browser. It doesn't work with iE 8/9 but it works with Firefox 6.0.1.
    Strange...

  • How to access the ms access database in the JApplet?

    I am New here.
    Please help me.
    I am create one java file to access MS access the database in the JApplet.
    It say "Access denied".
    How to access the ms access database in the JApplet?
    Message was edited by:
    SVPRM

    Hi,
    First of all, were u successfull in creating the connection with the .mdb file.Like settting the DSN and configuring the .mdb file path in control panel.
    If yes then one option might be that the file ur trying to access is in Read-only mode.
    regards

  • How to access the SAP MDM destinations using mdm java api in 7.1

    hi,
    I have SAP MDM 7.1 SP11 and SAP Portal 7.3 and developing the custom webdynpro application using the  JAVA MDM API. I want configure the SAP MDM destinations in SAP Portal .
    How to access the MDM destinations in java code using API? and how to create the connection with MDM using the MDM destinations.
    Please provide the code for access the SAP MDM destinations in java code using MDM java api and creating the connection to MDM.
    Thanks

    Jun,
    Thanks for the reply and api information.
    I have got this api information from the following sap documentation. But i am looking for the code by implementing this class and creating the mdm connection.
    Creating an MDM Connection Using Java Code - SAP NetWeaver Master Data Management (MDM) - SAP Library
    if any thing can you share it.
    Thanks

  • How to access the JMS queues in the XI J2EE Engine?

    Hi Gurus,
    Can anybody know how to access the jms dead message queues in the WAS J2EE Engine?
    I have read in the SAP documentation that we can use some JMS commands from the telnet. I don't know how to use those commands.
    Can anybody provide a step-by-step process to access these queues?
    Thanks
    Kalyan

    1) Open a command prompt
    2) type
    telnet localhost 50008
    where the port is the same as your http, but with 8 as last digit.
    3) Login
    4) Issue the following set of commands
            jump 0
            add jms
            jms list deadmsgs
    Check by man jms other possible options.
    HTH
    Peter

  • How to set the JVM Startup Options?

    Hi,
    I want to know how to set the JVM Startup Options...
    The idea is, I want to test how the remote clients can access an EJB that is running on a different machine... Remote client here means, I have a java client application that runs on one machine and that contacts an EJB thats running on a different machine... I posted this question in J2EE forum and I got this reply...
    If you need to access EJB components that are residing in a remote system other than the system where the application client is being developed, set the values for the Java Virtual Machine startup options:
    jvmarg value = "-Dorg.omg.CORBA.ORBInitialHost=${ORBhost}"
    jvmarg value = "-Dorg.omg.CORBA.ORBInitialPort=${ORBport}"
    Now how to set the JVM Startup Options? I know my server ORBHost Name and the ORBPort..
    Anybody to help !!!
    Thanks in advance,
    Karthik

    java -Dorg.omg.CORBA.ORBInitialHost=${ORBhost} -Dorg.omg.CORBA.ORBInitialPort=${ORBport} <the main class>
    That should do it..

  • Unable to configure Power Management options

    Following Power Management options are disabled/greyed out for me -
    Choose What Power Buttons Do
    Choose What Closing the Lid does
    I am using Lenovo T420, windows 7 enterprise and I also have the admin login.
    The Close Lid action is set to Hibernate by default which is really frustrating and I would like to configure this especially.
    Please help.

    Hey Nakul,
    I wanted to add the link for sarbin here it is, as he has stated make sure your at the current version if you are post back and we will be more then happy to help you out.
                  http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70601
    Best Regards,
    Hiro
    Did you find a post Awesome? A response just Outstanding? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

Maybe you are looking for

  • Do I need a new GFX card for FCS 2?

    "An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)" I don't speak this language. I have a Power Mac G5 Quad. When I go to "About this MAC" it says that I have PCI somethi

  • How to add one more character in selection [JS] [CS2]

    Hi All I am wondering the way to add one more character in my selection. I have a script which adds the xml Element and parent xml Element in selected text so far so good, but further my expectation is to cut this text with tag and paste it into anch

  • Audio and video compressors

    how do i set the for my Live! Cam Chat Web Camera?

  • How to check the maximum Value and Last value in Reports CP column

    Hi all First of all i am sory that iam posting this question in forms instead of Reports....i had posted it in reports but no one reply and i need uirgent solution so I post here.... My problem is that in Report I have calculated some values in CP co

  • Transfer chrome bookmarks to iPad?

    I use Google Chrome on my iMac and would like to transfer (sync) my bookmarks with Safari on my iPad.  Thanks.