How to access to configuration page of the router through the windows phone 7 ?

Hi all
I'd like to know if there's a way to access to configuration page of the router through my windows phone 7.
I usually access the router by laptop as following: "192.168.1.1". but sometimes when I'm on my phone I need to reboot the router through my phone other then the laptop which is not near me...
I looked up for applications that should do the work, but unfortunately I got no positive result, so I'm reaching out to this very forum in order to find help and tricks so that I can figure it out
thank you in advance

Hi Happydz,
For help using Windows Phone please post in the Windows Phone forums on
http://answers.microsoft.com .
The MSDN Windows Phone Development forums are for developers to discuss writing their own Windows Phone apps.
That said, I'd expect you could connect to 192.168.1.1 from the phone's browser the same way you would from the laptop's browser.

Similar Messages

How To Restore A Locked Pages Document ? ( I Forgot The Pass )

How To Restore A Locked Pages Document ? ( I Forgot The Pass ) I Created A Documents Of My Personal Expense And Locked it So That No One Could See it !! But Apparently Now Even i Don't Remember The Pass So if Someone Could Please help Me On How To Regain Access of That Locked Documents ? ( Thanks in Advance )

Once you set a Pages document password, you will need it again to unlock the document. There is no other available unlocking technique, as many before you have discovered. Tell your mind to recall your document password, and then stop trying to remember it. Let your subconscious retrieve it.
In the future, keep a secure, analog list of your passwords as backup.

How do I add multiple pages from my scanner to the adobe app?

How do I add multiple pages from my scanner to the adobe app?

You can't do this in Reader. It must be done in Acrobat on Windows or Macintosh.

How do I scan multiple pages into one document using the CanoScan LiDE 200?

How do I scan multiple pages into one document using the CanoScan LiDE 200?
I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

Using i-setup, how to migrate EBS configuration from one Business Group to the other within the instance?

Using i-setup, how to migrate EBS configuration from one Business Group to the other within the instance?

Sandeep,
Yes, I think your command format is not correct.
Try the one that Rod posted.
About the note on metalink. It seems that it is under review.
Here is the basics of the note:
1. Determine the owner of the workbook. Say UserA.
2. Open an sqlplus session to the database.
3. Run the following sql:
SQL> set heading off
SQL> set feedback off
SQL> set echo off
4. Now spool the result of the following sql to a file.
SQL> spool c:\exp.bat
5. Run the sql statement
NOTE: CHANGE DISCOE_HOME
SQL>select '<Disco_Home>\discvr4\dis4adm /connect
EUL_owner_name/passwd@connect_string /export c:\'||rownum||'.eex /workbook "'||
doc_created_by||'.'||doc_name||'"' from
SELECT EUL4_DOCUMENTS.DOC_NAME, doc_created_by, NVL(EUL4_EUL_USERS.EU_USERNAME,
'Document Not Shared') shared_with
FROM EUL4_ACCESS_PRIVS EUL4_ACCESS_PRIVS, EUL4_DOCUMENTS EUL4_DOCUMENTS,
EUL4_EUL_USERS EUL4_EUL_USERS
WHERE ( EUL4_DOCUMENTS.DOC_ID = EUL4_ACCESS_PRIVS.GD_DOC_ID(+) ) AND (
EUL4_EUL_USERS.EU_ID(+) = EUL4_ACCESS_PRIVS.AP_EU_ID )
where doc_created_by='UserA'
where,
Disco_Home is the Location or Discoverer 4 Home.
4. SQL> spool off
5. SQL> set feedback on
6. Now run the batch command file (exp.bat)
Regards
Roelie Viviers

TS3276 I am unable to access mail on icloud or send mail through the icloud account. How can I get mail routed through the icloud account.

I am unable to access mail on icloud or send mail through the icloud

Here is how to set up your iCloud email account:
http://www.apple.com/support/macosx/mailassistant/

How do you add a page without messing up all the images below.?

How do you add a page without messing up all the images below?
I try the pages ->add a page beak but it messing up with all the images below. Examples : I want to insert a page between page 1 and 2. My images doesn't follow my text. All the images stay in place and all the text bump 1 page. Pretty frustrating!

What version of Pages?
Peter

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

How do I connect my MacBook pro to the Internet through the 3G server on my iPhone?

Does anyone know how to connect my MacBook pro to the Internet through the 3G server on my iPhone?

There is a service called Personal Hotspot that uses your iPhone's connection to share with other devices. You will need to sign up for this service through your carrier. Good luck

How to call a previous operation in the routing in the backend?

(We have a requirement to call a previous operation in the routing in the backend and create-assemble-complete the SFC.)
Routing would be u2013 OPERATION_1 -> OPERATION_2 -> OPERATION_3
The SFC has not been create and we are using u201CCreate SFC On Demandu201D.
The production operator is given the SFC value to use, however, the POD is configured to START the SFC at OPERATION_2
The desire is to process the SFC at OPERATION_1 as a u201Cblindu201D operation to production.
The question: If we use a PRE_START activity, is it possible to launch the PRE_START activity at OPERATION_2 and have the activity:
1) Create the SFC,
2) Start the SFC at OPERATION_1,
3) Assemble a child SFC (part of the activity information),
4) Complete the SFC at OPERATION_1,
5) Upon completion of the SFC at OPERATION_1 finalize the activity and allow the SFC to start at OPERATION_2 normally?
Thanks and Regards,
Avinash
Edited by: Avinash Fernandes on Feb 16, 2012 3:30 AM

Hi,
a managed property only gives you a anlde to a bean or property, it doesn't execute it. To execute a bean, you can use a custom JSF PhaseListener that calls a bean method. The reference to the bean is achieve through value binding
ValueBinding vb = FacesContect.getCurrentInstance().getApplication().createValueBinding("Name of Managed Bean);
TypeOfBean theBean =(TypeOfBean) vb.getValue(FacesContext.getCurrentInstance());
.... theBean.theMethod() ...
Frank

How can I watch a film on my ipad through the tv

I am a new IPAD owner. does anyone know how I can watch a film on my ipad through the my TV. Do I need special connections?
Thanks for any help you can give me.

http://store.apple.com/us/product/MC953ZM/A?fnode=MTc0MjU4NjE

HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

I can not access the switch through the console (solved)

Hello,
I'm having a problem.
I can not access the switch through the console. The web interface is working properly.
Model: SRW224g4
Below some pictures.
The HyperTerminal settings
error:
If anyone can help me?
Thank you and excuse the bad English.

Hello Rumenigue,
It looks to me like you are using a console cable. The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself.
Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
Hope I have helped,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center

السماح بالكتابة بحسب النطق الصوتي I want to be all the downloads through the program IDM How do I add that option to download? i have already tried to right-click of the mouse?

السماح بالكتابة بحسب النطق الصوتي
I want to be all the downloads through the program IDM How do I add that option to download? Has already tried to right-click of the mouse?
''duplicate - ''

Make sure that you have IDM 6.07 build 15?
* go to '''about:addons''' - extension and check that IDM CC is enable or not
* if all are up to date and enable, then IDM should start download autometically

How to access to configuration page of the router through the windows phone 7 ?

Similar Messages

Maybe you are looking for