How to access to EM Grid control from outside browser

I want to access to EM Grid Control console from an other place, outside of my office but I can't, I configured my firewall with the default ports 1159,1830.
I don't know if I have to add other port, I can't understand because I Have an other application e-business that I can access without any problems.

You can get to grid control within your office?
Try using the SECURE connection
https://host.port#/em

Similar Messages

  • Accessing remote jcs/jcx controls from page flows

    Hi,
    Is there a standard way to access remote jcx/jcs controls from page flows ?
    If i am correct the call to the dispatcher bean is a remote call , so can we run jcx/jcs controls on a different machine from where jpfs are running.
    I am just trying to dig into workshop framework to understand this , any pointers would be of great help.
    Thanks
    Varun

    Thanks for the tip. Unfortunately, I've tried this and there was no change.
    Here's how I tried to implement it:
    1. Edited the HTTP Configuration page in the Web Service wizard. Added http://portletserver/portlets/portletfolder/portlet.aspx. I've looked at this a million times to make sure there aren't any typos.
    2. Beforehand, I added http://portletserver/portlets/portletfolder/. to the HTTP Configuration page. I thought that would gateway everything in the portlet folder... Is that an incorrect assumption?
    3. I also tried to modify the .aspx page by adding a pt:url transformer tag to the target attribute of the form. The portlet works but it is still prompting with the pop up.

  • How do I access my Me email account from any browser?

    How do I access my ME Email account from any browser?

    To access to your @me.com mail address, open http://www.icloud.com, login with your Apple ID and choose Mail. This is the only way to access to your @me.com email from a browser. This website won't work with iPhones, iPods touch and iPads, as @me.com email supports is integrated into the operating system

  • How To Access PAGE ITEM (single row) from HTML source

    Hi Guys,
    I have a page Item that return a string.
    I would like to show this string
    How To Access PAGE ITEM (single row) from HTML source?
    My desire final output is
    <marquee>:P1_PAGE_ITEM</marquee>
    Can please help me
    Thanks

    Hi,
    You can refer the page items in your page header as &itemname. For example, if I have page item P15_TEST, I will add the following in header:
    <marquee>
       &P15_TEST.
    </marquee>But make sure that you have a process before header to populate the value in your page item. Otherwise, there will be a null scrolling (which you can't see!) :)
    Regards,
    Zahid

  • Urgent, how to insert un Idoc (already created)  from outside of SAP

    Hi to all,
    I would like to know how to insert an Idoc (alresdy created) from outside of a SAP environnement into SAP.
    I know via the code we20 we could insert an Idoc into SAP, does someone have a file PDF to explique how to do it step by step plz?
    or could you reply it in details step by step?
    caz we are doing a project and we know almost nothing about it, but we need the information urgent.
    Tks in advance

    Hi,
    i think you have missed some of the some of the columns having NOT NULL constraint.ex:Who Columns..
    Please check the same in the table..
    Thanks
    Bharat

  • Problemm with access agent on grid control

    Hi guys..
    I successfully installed oracle 10g release 2 GC on sun solaris (sparc) 10. To access the console, if I do use http://192.168.0.1:4889/em, it doesnt work. Then when I use the machine name http://zone1.test.com:4889/em it did work. Since there isnt any DNS to resolve hostname from ip, had to add an entry in the etc/hosts before it works.
    Now here comes the pb.
    We have 8i db (on sparc solaris 8), 9i dbs (on sparc solaris 8, 9, 10; on windows Xp, and on windows 2003 server) and 10g dbs (on sparc solaris 8, 9, 10; on windows Xp, and on windows 2003 server). I would like to use the GC installed on the solaris above as my centralized server for monitoring all our dbs.
    What I have to do is to install oracel GC agent on each machine running oracle. (but mai first question is which version to install? release 1 or release 2)??
    So for a begining, I installed oracle 10g release 2 agent on a windows machine runing oracle 10g database. It asked me for the server name, port and password (as the server is running in secure mode). The installation went ok but when I did access the grid control on the server side, I cant see the host or db on the target.
    Can any one let me know what happen or how ai could fix this?
    does ai need to add the ip and name of the windows machine in the /etc/hosts of the GC server so that it can resolve it?
    Any input is welcome.
    Junior DBA in distress.

    thanks for the reply mnazim.
    where is the emagent.trc and emoms.trc found? it is
    on the server or client (agent) side?
    here is another question!
    to start and stop all services on GC I saw from one
    website that we do the following.
    # Start everything
    /u01/app/oracle/product/10.1.0/oms/bin/emctl start agent
    You do not need to start agent from OMS_HOME
    /u01/app/oracle/product/10.1.0/oms/opmn/bin/opmnctl startall
    /u01/app/oracle/product/10.1.0/agent/bin/emctl start agent
    The above two are OK
    >
    # Stop everything
    /u01/app/oracle/product/10.1.0/agent/bin/emctl stop agent
    /u01/app/oracle/product/10.1.0/oms/opmn/bin/opmnctl stopall
    The above two are OK
    /u01/app/oracle/product/10.1.0/oms/bin/emctl stop agent
    You do not need to stop agent from OMS_HOME
    now is this the same with
    /u01/app/oracle/product/10.1.0/agent/bin/emctl start
    oms (to start everything) and
    /u01/app/oracle/product/10.1.0/agent/bin/emctl stop
    oms (to end everything) ????
    No it is not the same.

  • How to monitor ODI in Grid Control

    Hello
    We are using Grid Control 11.1.0.1.0 and ODI 11.1.1.5.0.
    We were previously using a grep command on the server that ODI was running from to monitor if it was up or not.
    Since the (OEM) upgrade we have lost this metric and would like to take a more elegant approach to monitoring the state of ODI.
    (We didn't install ODI as part of a WebLogic Server install, it is stand alone and therefore the plugins or usual way to monitor are not relevant to us.)
    Is there a way I can have Grid (via a UDM for instance) go into the database and query for a process?
    If the process is found then no alert is sent. This also means that we will only have to blackout the database during cold backups instead of the whole server.
    Hopefully this makes sense and hopefully someone can give me a few hints / tips on how to achieve this?
    Thanks.

    You can find info about the backups in sysman.mgmt$ha_backup. But only one entry per database can be seen. So only for the latest rman job you will find info here.
    You could also start using a rman catalog that will contain all backup info (example http://oracleinstall.wordpress.com/2011/06/03/oracle-11g-rman-catalog-setup/). You can create reports/queries on the rman repository to get the info you need.
    Or even better: create a rman repository and schedule the rman jobs using Grid/Cloud Control.
    Eric

  • How to access Time Capsule 2013 disk from Windows 7

    I have seen several (older) threads that suggest that you can access the Time Capsule disk from Windows 7 using Windows Explorer and navigating to \\Time-Capsule-Name.  However, I have tried this repeatedly and just cannot get it to work. 
    Could this be a bug or unsupported in the latest 2013 Time Capsule?
    In Airport Utility, under Disks > File Sharing, I have Enable File Sharing checked.  The workgroup is WORKGROUP. 
    The IP address is 192.168.1.4.  I am able to ping it successfully; I just cannot access it through Windows Explorer.
    Am I missing something?  Please help!

    Are you running homegroup on the PC..??
    That should definitely be turned off!!
    Homegroup can mess things up.
    I would try with ipv6 off but that might make no difference at all.. leave it set to local-link if it doesn't do anything.
    There was issues when the Gen4 came out with security. Windows uses too high an encryption level..
    See info here.
    http://www.dummies.com/how-to/content/changing-file-encryption-settings-on-a-win dows-7-h.pageCd-storyboard,pageNum-5.html
    Change to 40 or 56 bit encyrption.
    Unfortunately some of the controls you think you are setting on the TC are not really being set at all.. eg I doubt you are actually changing the workgroup.. if possible though you should have disk access set to lowest level .. device password and you should also turn on guest account to read and write.. that usually solved access for me in earlier TC .. I haven't bought an AC for the moment.. because.. well I believe I have done my time on the war front. I bled out already on the bleeding edge.. time for you to do it and I can reap the benefits on the second hardware revision and about the 10th firmware update.
    Other things I would try if the above don't work.
    Factory reset and start over.. you moved the IP of the TC and that is unwise.
    Do not worry about the various settings.. do the factory reset.. in full isolation from the internet. ie TC plugged into the windows computer. Nothing else in either..
    Now try at the default IP of the TC..
    \\10.0.1.1
    Beyond that you need another computer to try or some device. iOS would be fine... in normal situation you would test other protocols, eg ftp but TC offers only SMB and AFP.. there are no AFP clients for windows that I have heard of.. you might have success if you boot the PC from a linux live cd.. it should be able to read AFP even if it cannot write to it. But the SMB is more important. If linux can access with SMB protocol and windows cannot.. the issue is windws OS.
    Or iOS devices have some AFP file browsers available but again just test with SMB.. most file browsers for iOS use SMB.. if other devices can manage SMB protocol to open files on the TC then the finger points very clearly to the PC as the trouble.. on the other hand if nothing can access SMB then the TC is faulty and should be replaced.

  • How to access a  web service(.wsdl) from portal component.

    Hi ,
    Is there any document/tutorial available on how to access a webservice from portal component ?
    I have found this linkhttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/g-i/how to access a web service.htm...
    but the urls in the link are not working...
    i want  to know the steps to access webs service and sample code if some body has already done that..
    Thanks for the help.
    Lakshmi

    Hi Lakshmi,
    See the links below:
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/581140d72dc442e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/a3/918340d990ce62e10000000a155106/content.htm
    Hope this helps.
    Regards,
    Pooja.

  • How To Install/Configure OEM Grid Control On Windows

    Hi,
    I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
    This .zip files has 3 more .zip files eg
    File Size
    3822442.zip 510 MB (535,208,588 bytes)
    3731596.zip 275 KB (282,502 bytes)
    3731593.zip 510 MB (535,047,905 bytes)
    Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
    Pls email me at [email protected]
    Your help greatly appretiated.
    Regards,

    You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
    cheers
    Rob

  • How to access custom JAVA webdynpro application from an iPad?

    Hi,
    We are trying to access custom JAVA webdynpro application from an iPad, but nothing is opening up from the iPad browser.
    What can be the possible reasons for this? Any kind of SICF enablement or opening up of ports in the network?
    Any inputs are welcome!!
    TIA,
    Regards
    Deepthi

    Hi,
    it is possible to show Java Web Dynpro applications on a mobile device in general, but the controls and the ui should be optimized for the mobile device.
    Safari devices are not officially supported so far for Mobile Web Dynpro.
    Supported are Windows Mobile devices and Blackberry devices. I also got some good results with Symbian devices.
    You can find more inforamtion on Mobile Always Connected at:
    ht[http://help.sap.com/saphelp_nwce711core/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm|http://help.sap.com/saphelp_nwce711core/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm]
    Best Regards,
    Stefan

  • How to access database file on CDROM from Java Programe??

    Hello friends,
    I am making online exam application.
    I want my question database to be reside on CDROM.
    but i am not getting any idea how to make DSN or static path that resolute the path that i have mentioned for CDROM.
    basically i want to know how to access CDROM from Java Programe????
    Thanks in advance
    Navik Pathak

    Once you mounted the CDROM (something maybe as /media/cdrom) as a file system (or assigned a drive letter to it like D: or F: or whatever), the files are accessible normally.

  • How to access Business object type attribute from a method/function modul ?

    Hello,
    i have created a business object type object along with attributes and methods. Now inside the method i want to access the attributes. inside the method i am writing:
    data a type XXX.
    a = me->attribute
    this is creating a compilation error.
    Now the method is defined as a function module in some package, so can anyone inform me how to access object attributes from the function module ?
    pointes are awarded
    Regards

    Hello,
    thanks for your answer, but this too did not work, "=>" is for static attributes and the attributes i have are not static. Moreover, i tried it but it gave the same error :
    the abap error was when i was checking the code is :
    the type me=>documenttype is unknown
    as you know in SWO1 i created an object and when i create a method you link it to a function module and this is where you have the implementation of the method, so from this method how can i access the attributes on the main object that i created in SWO1
    regards

  • Removing incidents in grid control from backend repos database.

    hi,
    Like we remove alerts sometimes by deleting from mgmt_severity, is there any table which can help me remove some incidents which are not clearing in grid control 12C?
    I really need it please.

    What kinds of incidents are not clearing?
    For stateless incidents (such as logfile based incidents) you will need to manually clear the incident. You can remove the underlying alert using emcli clear_stateless_alerts.
    http://docs.oracle.com/cd/E24628_01/em.121/e17786/cli_verb_ref.htm#CACGAEDI
    The other alerts should be cleared by fixing the root cause after which the Incident should clear automatically.
    Mark.

  • How to access Oracle Apps 11i forms from Virtual Machine(Vmware Player)?

    Hi,
    I have installed Oracle Apps 11i on native OS OEL5 Server and Windows XPP on Virtual Machine using Vmware Player on standalone same desktop.Now how to access Oracle Apps 11i from Virtual Machine(Windows XPP)?
    Thank's
    Regard's
    Rerry

    Hi,
    Sorry my instance is PROD instead of TEST.
    1)Renamed the sqlnet.ora and make the following change in the tnsnames.ora (SERVICE_NAME = PROD) to (SID = PROD) and tryed but same error.
    2)Only one oracle homes on the cleint machine
    3)The output of tnsping PROD
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Administrator>tnsping PROD 5
    TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 23-FEB-20
    10 00:38:40
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=SHUBH.hnp.com)(PORT=1521))
    TNS-12570: TNS:packet reader failure
    Normal ping is ok from both host to guest and guest to host.
    Thank's
    Regard's
    Rerry

Maybe you are looking for