How to access WLAN card on Satellite Pro 6100?

I'm cleaning up a Satellite Pro 6100 for a customer and noticed that it has a built in wireless card (something they didn't know). However, I just can't work out how to access it. I've pushed the little switch on the side backwardsa and forwards, I've toggled Fn-F8 and everything else i can think of. But nothing happens.
I even discovered the Network Device Switch utility but that's only showing the LAN card.
Any ideas?

First of all please check in the device manager if the notebook has built-in WLan card. The available WLan switch at the notebook site says nothing. The notebooks are delivered with different specifications and the WLan card is optional.
I think the WLan card is not installed in your notebook and therefore you cannot use it.

Similar Messages

How to install WLAN adapter in Satellite Pro A10

I am trying to set up a wireless connection with my Satellite Pro A10. I thought it was wireless enabled, but when I toggle the wireless switch, no light comes on and there is no wireless card listed under Network adaptors (so I guess not).
How easy is it to install a wireless adaptor (i.e. can I do it myself or do I need to have it done by a professional)? Can anyone recommend which card I should by (or any I should avoid)?
Thanks.

Hi
According the notebook specification your Satellite Pro A10 is WLAN ready. In notebook specification there are listed two compatible WLAN cards:
PA3212U-4MPC (Agere 802.11b) and PA3273U-2MPC (802.11a/b).
I really do not know if you can use some faster WLAN cards with standard g. Maybe you will be lucky and someone will post here WLAN card upgrade results.
I am not 100% sure where the WLAN slot is placed but check please under the cover placed nears the battery.

Cannot activate the WLan card on Satellite A30

I have a satellite A30.
In the manual I got with the laptop it said some models have a built in wireless link. My computer has an on/off switch for wireless but i haven't been able to activate it.
How can i tell if this models wireless connection will work.
I have downloaded drivers from this website for wireless . After unzipping the file I found that there were no installation instructions or an executable file.
What do i do with the unzipped files.
Just a note i do have a belkin wireless router and have my A30 laptop wireless at the moment but i need a big clumsy network adaptor plugged into a USB port
Any help appreciated
Thanks Mark.

Hello Mark
First of all you must be sure if your unit is delivered with WLAN card. You can check this on two ways. First one is to check bottom side of your notebook. Every unit delivered with WLAN card has WLAN sticker. Other way you can check entrie in device manager under Network adapters. If the unit has WLAN card it will be listed there.
As far as I know WLAN card for Satellite A30 is optional and if the unit has no card on board you can buy compatible one or use external cards like USB WLAN stick or PCMCIA WLAN cards.

How to access Cyrillic glyphs from Trajan Pro 3 Regular?

I can download Trajan Pro3 regular in greek and latin glyphs but not in Cyrillic. Using Mac OS 10.7.5, Font Agent Pro 6.010.
No EULA Licence Agreement in russian, but Adobe told me I bought the right font (with cyrillic glyphs).

Thank you a lot.
The first downloading was not correct. I loaded again, and now it is ok.
Best regards
Catherine Anderegg
Anderegg Graphic
Le 23 févr. 2015 à 21:10, MiguelSousa a écrit :
How to access Cyrillic glyphs from Trajan Pro 3 Regular?
created by MiguelSousa in Adobe Type - View the full discussion
Yes, the Trajan Pro 3 fonts have Cyrillic glyphs in them. You need to use Unicode-encoded text to get to them.
Википедия
Cyrillic script in Unicode
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7222734#7222734 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7222734#7222734
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Type by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Satellite Pro 6100 Graphics Card Upgrade/Replacement

I have a Satellite Pro 6100 p4-m 2.0 30gb and the graphics card has died. I love this laptop.
It had an NVidia GeForce4 420 Go 16mb
Can I replace it with a GeForce4 420 Go 32mb from the same models.
Is there something more powerful available that works with no problems for the 6100? ie. GeForce4 440 Go 64mb?
Cheers

Usually toshiba didnt offered a separate graphics card update but there were different graphics cards installed in your machine and THEORETICALLY you can use every of these cards in your machine. I cannot promise it but they should all work in this machine.
The problem is that you have to disassemble the machine completely and if you make something wrong then you know that there is no point of return since your machine is not anymore in the warranty. Maybe it would make sense to give the machine some technician to exchange the graphics card.
Unfortunately I cannot tell you which graphics cards fit in your machine or which partnumbers are needed. In this case youre on your own.
Good luck

Satellite Pro 6100 switch itself OFF

Hello,
I'm from Italy. It's 3 days that my Satellite Pro 6100 after some time (it can be 30 minutes or 3 hours) shut down itself.
I've tried to update bios from version 1,70 to 1,90 with no result. I tested my HDD and it works fine. I formatted and reinstalled WXP Pro SP2 but the problem it's always there.
When it crash, at the restart it appears "BAD RTC BATTERIES" and "BAD CMOS", I've to press F1 then I exit without changing anything.
I saw that 3 weeks ago appears at the start that message:"PXE- E61 MEDIA TEST FAILURE CHECK CABLE'' and ''PXE-MOF EXITING INTEL PXE ROM" but the notebook works fine until 2 days ago.
I don't know why but each times I restart now it stop when WINDOWS XP mark is on the cyan window (not the first WXP logo on black page, but the second on the cyan window); then to make it works I have to press CTRL + ALT + CANC and it goes to the desktop.
I don't know what to do? Toshiba center it's far from my city, if u can help me will be appreciated.
Sorry for my English, I've read some post but exactly with my problems there's no post.
Thanks in advance, that's a great notebook I hop to save it.
p.s. there's no dust on it, I tried to lift the keyboard to clean but it was already clean, even behind on the fan.

Hello supertraz,
Please read further ahead (2nd page) in the forum on the link from my previous post. There is a written step by step guide, but...
It is not very easy to be done by yourself if you don't have the proper tools and experience... Neither do I want to encourage you to do it yourself as you might end up with a completlly damaged notebook, instead, I'd like to suggest you to consult a computer repair store in your neighborhood and ask them to resolder the specific area.
Here's a link on how to access the interior of your notebook you were asking for (with pictures):
http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm
Regards,
electrochain

Satellite Pro 6100 shuts down after 15-30 minutes

My satellite Pro 6100 cuts out after 15-30 mins operating on mains power. There is a snapping sound and all lights go out except slow flashing amber (power problem). I restore it by removing the power cable and waiting a while.
It will then boot up again. I have used two different power adaptors and two different battery packs. It also happens if running on mains with no battery in. My suspicion is an overheat cut-out. Does the Sat Pro have one? Might it be clogged with dust inside (it is 5 years old)? If so how do I clean it out. I don't think it is fan failure as I can hear the fan cut in. Advice much appreciated. Thank you.

Hi there,
Me and my partner, have the same LapTop, and I've located the problem in connector between PSU board and MainBoard. So, if you've never opened your LapTop, now is the time, but be prepared with tools for SMD soldering. Usually, the connector on MainBoard is the problem. The reason for this is that Toshiba made flaw in design of the housing and admitted that, which resulted with court order for replacing the LapTop with some models from newer line for that time, or paying cash amount ($1.000). I intend to repair my LapTop in a way that I will replace the connectors (both on PSU and Main Board) with thin wires. I know that this is a hell of a job (160 solder points) but what can I do, I love this machine. I am working on Compaq EVO N-610c, but he can only eat the dust from Toshiba.
Regards,
Alek
P.S. If you want to consult me about that matter, feel free to contact me on my e-Mail: [email protected]

Satellite Pro 6100: Fn keys not working

Hello,
Ive got a Satellite Pro 6100 notebook. Im having trouble using the secondary function keys (im not sure what they're called!). When I press the function (Fn) button, the light below the F10 button come on as it should, but when i press any of the F buttons i.e brightness up/down, nothing works!
I had a quick look at some of the keyboard help and troubleshooter in control panel which suggested the driver may be incorrect so i tried looking for an updated driver, but windows said i have the latest driver.
Does anybody else have this problem with the SP6100? Can it be fixed? If so how?!
Any help would be great.
Thanks - Kavi.
Message was edited by: kavi

Hi
Even the Windows said you use the latest drivers, you should reinstall the drivers.
Firstly remove the Hotkey Utility Emulator for Display Devices from Add & remove programs.
The reinstall the common modules and Hotkey Utility Emulator for Display Devices.
Hope it helps pleas let us known if it will work or not

Product recovery CD/DVDs for Satellite Pro 6100 ?

Hi,
I bought a Satellite Pro 6100 (model number: PS610E-029ZV-BE) second hand and have experienced a non recoverable crash.
I need to reinstall but as you can guess, I don't have the recovery CD/DVDs. Does anyone out there have them and could send/ftp a copy ?
I have tried with an official windows XP Pro CD, but the key which is on the little sticker on the laptop is not accepted...
Thanks in advance for your help
Bruno Mamer

Hi
How Nick said, you can buy the Recovery CD but if you want you can install the original Microsoft Windows OS and then all necessary Toshiba tools & drivers.
You can download the drivers from the Toshiba website:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Best regards

Is it possible to install Windows 7 on Satellite Pro 6100

Is it possible to install windows 7 on a Toshiba Satellite pro 6100 machine? I 'm currently using windows XP.
thanks.

Hi buddy,
Do you really think about Windows 7 installation on many years old Satellite Pro 6100???
In my opinion this will not work because its too old and not fast enough. Newest OS that is supported from Toshiba is Windows XP and this should be the best choice for this oldie.
So just be satisfied with Windows XP, its a good choice for older computers! :)

Can't see new hard drive on my Satellite Pro 6100

I have bought a new Toshiba 40GB hard drive for my Satellite Pro 6100.
I have installed it in it's bay but it is not being recognised in the BIOS or when i try to reinstall using the recovery disc!
Would the bios recognise that there is a drive even if it is not formatted?
Am missing something?
Thanks in advance
Neil

It should work !
The drive also should be recognized even it is not formatted...
3 things you can do:
At boot up you can go into bootmenu and check if the drive is being recognized on the 1st controller.
If not check configuration of the drive (master/slave/cable select).
If this does not help check toshiba support website and download the latest bios (probably you already have it, check like mentioned above)
If this does not work your new drive (or worse: your controller) could be faulty. If the orignal drive still works on your laptop, check the 40gb drive in another laptop or PC with adapter to normal ATA-connection.

Satellite Pro 6100 - "Built-in HDD Password" error at startup

Hi, my laptop (Satellite Pro 6100 P4-M 1.7 GHz/15TFT/256MB/40GB/DVD-CDRW/LAN/WiFi/BT/W2K or XP) has rather recently started prompting me with a message "Built-in HDD Password" at boot up. I've never set any passwords on the hard disk in the past, though in desperation of trying to get the laptop running, have tried all the possible passwords that I've ever had. Nothing's working, and I am stranded with a dead laptop on my hands. I would appreciate any help/advice that anyone can render.
Thanks.

Hi Khurram,
Sadly I think you will need to replace your hard drive. If your notebook is definitely asking for a hard drive password then there is no way of bypassing this and the only way that I know of recovering this situation is to send the hard drive to a specialist company who specialise in this kind of recovery (usually for forensic puposes, Police, armed forces, etc.). This can prove quite expensive.
The easiest (and cheapest) option would be for you to replace the hard drive and then restore your system and data (either from a backup if you have one, or else from the Toshiba recovery discs).
regards,

No Model Number in Download Page for Satellite Pro 6100, model PS610C-NGYSPP

I am using Satellite Pro 6100,
model PS610C-NGYSPP
Serial No - 33127448P
The Problem is I want download the Drivers for my Laptop.
IN the download page (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU)
if i take Product series = Satellite Pro 61xx
and Model = Satellite Pro 6100
IN The short Model no, i only have PS610U or PS610E
and my model is PS610C,
can any give me exact Product series, model and short model to use for the good drivers?
Solved!
Go to Solution.

Hello Thaliehome,
Your model is a canadian unit.
Here is the link to your driver downloads for your model.
http://support.toshiba.ca/support/Download/ln_byModel.asp
Good luck.

Satellite Pro 6100 screen compatibility

Hello!
Is there a place i can check screen compatibility for my Toshiba SP 6100?
I have damaged a screen on one of my laptop and would like to replace it.
Thanks

Hi
The problem is that Satellite Pro 6100 was delivered with four different displays.
14.1' (1024x768) TFT colour display,
15.1' (1024x768) TFT colour display,
15.1' (1400x1050) TFT colour display,
15.1' (1600x1200) TFT colour display
I have found a information that a P000334230 (LTN150X4-L01) screen is compatible with your unit.
http://www.getpartsonline.com/p000334230.html
But I recommend asking the Toshiba service partner in you country for compatible screens.

Satellite Pro 6100: Can't enter BIOS and won't boot up

I've got a Satellite pro 6100 notebook, en I was trying to make it boot from an external USB HD. When I enabled the second hard disk option in the BIOS it stopped booting all together en I can't even enter the BIOS Setup anymore. All I get is the "TOSHIBA in touch with tomorrow" screen with the icons to select the preferred boot method manually after that it's just blank screen with a blinking cursor in the top left corner.
Holding down the ESC or F8 key before powering on usually results in fast beeping sounds.
Holding the tilde (~) key before powering on results in the screen remaining blank (not even the toshiba splash screen appears) and slow beepings sounds.
Appart from that I can't really make her do anything at all.
I tried resetting the BIOS by disconnecting the CMOS/RTC battery (hoewever it's called) from the motherboard for a while, with no results.
Powering on without the internal HD results in a blank screen with an "IDE #0 ERROR".
I can always shutdown by holding down the power button, don't bother about the external HD, it gone I don't even want that to work anymore.
Suggestions?

Thanks for helping me out,
With this laptop I only use both hard disks internally (not both at the same time ofcourse). As long as I can't boot normally or can't get into the BIOS I won't bother using USB.
About USB Booting: I believe the newest BIOS have USB booting built-in, and you can specify it in the boot order menu, or so I read. My BIOS is obviously not able to do this.
Back to the problem: what CAN I do in this situation:
ESC to get into the BIOS :: doesn't work
F8 to specify boot order :: doesn't work
Holding down the tilde (~) key before power-up :: beeping, this is the BIOS update mode right?
I found this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1402&tstart=306
Sounds familiar.
So I guess I'll try a BIOS update, I found information about that on the Toshiba site, the only problem is that I don't have a floppy disk drive, but it should be possible with a CD too, any suggestions are welcome.
And could anybody tell me something about that resume mode (if you think that's relevant).
Thanks.

How to access WLAN card on Satellite Pro 6100?

Similar Messages

Maybe you are looking for