How to achieve streaming audio and video with SBS 2003

Basic Fact: SBS 2003 is frozen at SP1. I am connecting to Verizon DSL--now Frontier DSL-- using their DSL modem, which is a Linksys 7550 modem. The gateway on the modem card is 192.168.254.254. Communication to and from the internet
works, but there is apparently a lot of noise on the line and SBS2003 responds by disconnecting the WAN line. I have to get to the Network Connections page, select the WAN connector, right-click it and tell it to repair itself (an image that is definitely
R-rated). Where can tell the system to not disable the WAN line if it detect some noise? This process of repairing the line is inconnevient when I am in the room with the SBS box, and impossible if I am trying to stream video to the set in the
living-room.

Hi Hollis:
It is not clear why the server is in play here. If you have a "better than average" firewall at the edge you can use SBS in a single NIC config and from your living room go straight to the internet through the firewall and the ISP device
without impacting the SBS other than for DNS.
And if you don't care about who accesses your internal network from the internet a "better than average" firewall would not be required.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.
Larry,
Thanks for the reply. What you are really saying is that SBS server is so complicated and. because so little is documented about its guts and internal workings, that it is better to treat it as a black box and use an external solution. That is a sad commentary
on a really good product, even if I am frozen at 2003 SP1. There really has to be somewhere that the wan line is set to be disabled on the lowest level of noise. There should be a means of boosting that trigger level. If we just knew where it is done.
Given that that we really are dealing with a black box here, can you give me the names of a few firewalls qualifying as "better than average". I do recognizing that I am living at that queasy stage where any major catastrophy with the server will
cause complete abandonment of the server, and all the conveniences it provides. When the motherboard died last time I bit the bullet and replaced it at not too great a cost. So, here we are again--do I convert to just Frontier security offerings and google
apps. Google is notorius for providing no support. Then again, the Microsoft products are so bloated that I use less than 10% of any one. Fortunately, that 10% has really never needed any support. And I have pretty much given up pondering the use of XML due
to a dirth of info from Microsoft about it. Sigh. I think I had better take a dramamine before going farther into the murk here.
Hollis

Similar Messages

How do I synchronise audio and video with an mpg file created in elements 11 ?

How do I synchronise audio and video with an mpg file created in Premier Elements 11 ?
The source files are VOB files, and there is no problem with those source files. But after creating the mpg file, the audio can be out of sync by 1 second or even 10 seconds, and sometimes zero seconds (ie perfectly OK). That varies. The variation might be linked to some of the VOB files. ie. some are OK, and some are not.
Can I fix this automatically in Elements 11, or am I doing something wrong ?

Hartwood,
First, Premiere (both Pro and Elements) do not handle MPEG Audio perfectly - they like some files, but not all files with MPEG Audio. That makes a VOB a less-than-perfect source file. Still, with a bit of work, one should be able to edit it just fine. One of the factors is that there is a very slight block-size difference between the Encoded Video Stream and the Encode Audio Stream in a muxed MPEG-2 file. That often does not play into things, but can cause slight OOS (Out of Sync) issues. Also, both Premieres need to create all I-Frame files for the Video Stream, which is in GOP (Group of Pictures) structure, so what one sees on the Timeline is really a proxy of the MPEG-2 file's Video Stream. The Audio Stream must also be Conformed to PCM/WAV @ 48KHz 32-bit floating point, to be edited. That Conforming is perfect when one has PCM/WAV @ 48KHz 16-bit for the Audio Stream, but requires more work, when the Audio Stream is MPEG (one reason that some MP3's do not work well in Premiere). Several factors involved here, and a fair amount of work for the program. That is why DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio works so perfectly.
Now, fixing OOS might be easy, or might require a bit more work. This article goes into some workflows, that might be helpful: http://forums.adobe.com/thread/436751?tstart=0
I can feel your pain, as I almost went crazy trying to fix OOS in a client's Project. They ONLY had the finished DVD, from which to work. The disc met the DVD-standards, so everything ripped/Imported fine, and when the simple edits were done (IIRC, there were four scenes, that had to be shortened, and then several Titles added), everything played fine in the Timeline. However, when I Transcoded that Timeline to be authored in Adobe Encore, two scenes went OOS. I went back to Premiere, and checked - all perfect there. I tried to judge the number of Frames that the Audio was out, in those scenes, and nudged them, tested, nudged, tested, and no matter what I did, I could never get the output files perfect, when Imported into Encore for authoring to DVD-Video. I tried DV-AVI, and letting Encore set the Transcoding automatically (usually a great way to work), I tried manually setting the Transcoding in Encore. I tried outputting to MPEG-2 from Premiere, and Importing that. No matter what I did, those two scenes were just OOS, and I could not even seem to improve them - it was like they were just locked OOS. I finally did some more editing, to break things up a bit, added a cut-away shot here, and there, and minimized the perceived OOS, but could never get it perfect. It was like trying to pick up quicksilver with a pair of tweezers!
Good luck,
Hunt

Operating Windows 7 Home Premium, 2 user accounts. Running Firefox one user can stream audio and video, the other cannot. Can anyone help?

Two accounts set up. One can stream audio and video using Firefox, the other account cannot. The account with cannot stream a/v is able to steam a/v using (gasp) MS Internet Explorer. Is there some setting I have screwed up?

There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].

Streaming Audio and Video to N900

Hi Guys,
Not sure if anyone else has tried this or not, but I was playing around with Windows Media Player on the PC and setup up the Media Sharing which alows you to share audio and video with other devices. Surprising enough I got it working with the N900 first time.
Setup up some items in the WMP library, turned on sharing. Connected the N900 to my wireless router, loaded up the File Manager and up poped the Shared Media icon. Clicking on that showed my PC and then all the folder structure, opened the video folder and just tried my luck clicking on one of the videos.
It was a divx file and the N900 media player buffered for a few seconds and played it back perfectly. I didn't even have to download an extra codec or anything, it just streamed the video perfectly.
Anyone else had a go?
Paul.

I have some issues with this feature. I can play all the media, however, I can only hear sound for a few secondsbut no images; then freezes.
Format: xvid (.avi)
OS: Windows Vista home premium X64 (WMP 11)
Does anyone has the same problem or a fix?

Streaming audio and video frequently freezes or becomes garbled.

Streaming audio and video frequently freezes or becomes garbled on my Macbook. I do not have this problem with non streaming media such as iTunes or downloaded video. The problem started six or eight months ago and has gradually become worse. I don't know what to start checking.

I have some issues with this feature. I can play all the media, however, I can only hear sound for a few secondsbut no images; then freezes.
Format: xvid (.avi)
OS: Windows Vista home premium X64 (WMP 11)
Does anyone has the same problem or a fix?

MHP(XletView) streaming audio and video sample

I need some sample which uses streaming audio and video for Xletview, where can find it??

Hi,
If you want some examples check the pege:
http://www.mhp-interactive.org/code/codesamples.shtml
Have a nice playing
Regards, Martinez

No audio and video with iChatAV connecting to one computer

Hi all, very strange issue here. Have two new alu iMacs, one 2.4 24" and one 2.0 20". Set them up at home and everything worked fine. Set up two seperate AIM accounts and got audio and video iChat working with no problems at all. Got it to work between my two computers and with another one. I then moved my 20" iMac to my office. I am now only able to send text messages, no audio and video with iChat any more. Get message that account doesn't answer. Of course we accept and everything. The strange thing is that both my computers do get audio and video working connecting to my friend's iMac with iChatAV only not when connecting to eachother. When we tried to make a converence call, my friend had to invite us and then my home computer could see and hear me at the office and my friend, while my friend and I could see and hear eachother, but only could hear my home computer. What could be wrong here?

Can you mark the thread as Answered then please.
10:13 PM Friday; January 25, 2008

How to stream audio and video captured from mic and webcam in sync.

I am working on a video chat project. I need to capture audio and video from mic and webcam and create rtp stream for them. How can I proceed for this. Any source code help will be highly appreciated. Otherwise just guide me how to do this and point to any good resource which is directly related to my need.
Thanx.

t.b.m
As mentioned by you, i am doing exactly like that . I have coded transmitter class. But at the receiver side it is unable to play the stream. I am posting my code . Can you please help with me with any mistake i m making in my code ?? Or with way I should receive stream at receiver side. Plz see my code. I am streaming to ip address 172.31.80.67.
package heyram;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.format.*;
import java.io.IOException;
import java.util.Vector;
import java.net.InetAddress;
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import com.sun.media.rtp.*;
import java.lang.Thread.*;
public class HEYRAM{
Format[] format=new Format[2];
Vector[] devices=new Vector[2];
CaptureDeviceInfo[] di=new CaptureDeviceInfo[2];
   SessionManager rtpsm = new com.sun.media.rtp.RTPSessionMgr();
Processor p=null;
Processor p1=null;
boolean result;
public HEYRAM(String address,int port,int ttl){
    try{
            InetAddress destaddr = InetAddress.getByName(address);
            SessionAddress sessaddr = new SessionAddress(destaddr,
                                                         port,
                                                         destaddr,
                                                         port + 1);
            String cname = rtpsm.generateCNAME();
                String username = null;
            try {
            username = System.getProperty("user.name");
        } catch (SecurityException e){
            username = "jmf-user";
        // create our local Session Address
        SessionAddress localaddr = new SessionAddress();
            SourceDescription[] userdesclist= new SourceDescription[]
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_EMAIL,
                                      "[email protected]",
                                                                 1,
                                      false),
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_CNAME,
                                      cname,
                                      1,
                                      false),
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_TOOL,
                                      "JMF RTP Player v2.0",
                                      1,
                                      false)
            rtpsm.initSession(localaddr,
                            userdesclist,
                            0.05,
                            0.25);
            rtpsm.startSession(sessaddr,ttl,null);
        } catch (Exception e) {
            System.err.println(e.getMessage());
            //return null;
    // rtpsm.initSession(localAddress, defaultUserDesc, rtcp_bw_fraction, rtcp_sender_bw_fraction);
        // rtpsm.startSession(...);
public void createVideoSession()
    format[1] = new VideoFormat(VideoFormat.YUV);
    devices[1]= CaptureDeviceManager.getDeviceList( format[1]);
     di[1]= null;
        if (devices[1].size() > 0) {
             di[1] = (CaptureDeviceInfo)devices[1].elementAt(0);
              System.out.println(di[1].toString());
        else {
            // exit if we could not find the relevant capture device.
         System.out.println("1234jjfjsajfjasf1");
            System.exit(-1);
        // Create a processor for this capture device & exit if we
        // cannot create it
        try {
            p1 = Manager.createProcessor(di[1].getLocator());
        } catch (IOException e) {
            System.out.println("1234jjfjsajfjasf2");
            System.exit(-1);
        } catch (NoProcessorException e) {
            System.out.println("1234jjfjsajfjasf3");
            System.exit(-1);
        // at this point, we have succesfully created the processor.
        // Realize it and block until it is configured.
       // p1.configure();
     result = waitForState(p1, Processor.Configured);
     if (result == false)
     System.out.println("Couldn't realize processor");
        p1.setContentDescriptor(new ContentDescriptor( ContentDescriptor.RAW_RTP));
        // block until it has been configured
        TrackControl track[] = p1.getTrackControls();
        boolean encodingOk = false;
        // Go through the tracks and try to program one of them to
        // output ULAW_RTP data.
        for (int i = 0; i < track.length; i++) {
            if (!encodingOk && track[i] instanceof FormatControl) {
                if (((FormatControl)track).
setFormat( new VideoFormat(VideoFormat.YUV)) == null) {
track[i].setEnabled(false);
else {
encodingOk = true;
else {
// we could not set this track to gsm, so disable it
track[i].setEnabled(false);
// Realize it and block until it is realized.
p1.realize();
result = waitForState(p1, Processor.Realized);
     if (result == false)
     System.out.println("Couldn't realize processor");
// block until realized.
// get the output datasource of the processor and exit
// if we fail
DataSource ds = null;
try {
ds = p1.getDataOutput();
} catch (NotRealizedError e){
//System.exit(-1);
System.out.println("1234jjfjsajfjasf4");
// Create a SessionManager and hand over the
// datasource for SendStream creation.
// The session manager then needs to be initialized and started:
// rtpsm.initSession(...);
// rtpsm.startSession(...);
try {
(rtpsm.createSendStream(ds, 0)).start();
} catch (IOException e){
System.out.println("1234jjfjsajfjasf6");
e.printStackTrace();
} catch( UnsupportedFormatException e) {
System.out.println("1234jjfjsajfjasf7");
e.printStackTrace();
public void createAudioSession(){
format[0] = new AudioFormat("linear",8000,8,1);
devices[0]= CaptureDeviceManager.getDeviceList( format[0]);

Problems with Camino and Safari browers on sites streaming audio and video.

The Camino browser (latest update) will not allow me to type anything if I am listening to a site with streaming audio or video. As soon as I start typing, I get white patches all over the place. The only solution was to use Safari for listening and do the typing on Camino. Now, Safari freezes on every single site that has any streaming. The Safari version is 3.03, and it was working fine a few days ago. Any ideas?

Hi,
Try troubleshooting the Safari .plist file. Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a .flv file. If it downloads the file as it should then move the .plist file to the Trash, otherwise move it back to the Preferences folder.
If that didn't help, back to the Finder window, Home folder, Library / Safari. Move the Downloads.plist file from the Safari folder to the Trash. Restart Safari. Try again.
And check Safari / Preferences - Extensions. Could be an Extension causing a conflict. If you have any installed, turn that off, relaunch Safari, try again.
Carolyn

Configuring WebLogic 8.1 to serve Streaming Audio and Video

Hello,
I have a requirement to serve video and audio on my application. Could anyone
please give me the details about how to configure webLogic8.1 for streaming audio/video.
Where should the files be placed? How to go about it...etc...etc.
It would also be very helpful if anyone could direct me to websites or other
resources that can provide extensive details about the same.

it's not a feature unless someone adds it...
You mean Apple will never accepts such feature in the App Store ?
I'm wondering why they want to apply a restriction like this one, this really does not make sense to me...
I've seen in a shop a device with 32gb internal flash to connect to the iphone ipad and use it like an hd for storing stuff, if they allow such thing why they don't allow this one, there is no difference in the end, also they allow streaming thru wi-fi, and they allow media players to store and read audio and video without using itunes. So i really don't get the point of their policy.

How to combine discrete audio and video files?

I am working on a project which requires me to merge a video file with a PCM audio file from another source.
I just bought Compressor 4.1.1, expecting to be able to do exactly this.
The only "multiple input - single output" option I can see is creating a surround sound group, adding my audio as left and right channels, and then attaching the video.
This does not work. Pressing "add" at the end of the process does not result in a new job.
Help please!
G.

QT7 Pro is able to do this. Cost is $30.
In QT7 Pro, open up the audio and video files to be matched.
Select all the audio and then select copy
In the video window, put the playback head where you want the audio to start then select add to movie.
Verify the playback is as desired, then save the movie. Done.
Takes longer to describe the process than to do it.
x
Of course, life is good when the in point is exactly the same for both audio and video ...

Capture and streaming audio and video

JavaFX supports capture and record audio and video and need some streaming server as woonza, red5, flash media server to play the streaming?

JavaFX does not support flash streaming.
JavaFX does support http live streaming: http://en.wikipedia.org/wiki/HTTP_Live_Streaming
JavaFX does not support audio/video capture (there are other java/native libraries that do that).
See:
Video camera capture/streaming: example implementation "Thread: Video camera capture/streaming: example implementation"
http://javafx-jira.kenai.com/browse/RT-3458 "Camera and Microphone" (go vote for this jira to get some capture technology built into JavaFX).

IChatAV not doing audio and video with Jabber

I am using a Macbook and have configured iChat to talk to MSN via Jabber using Psi and a server in UK called tuff.org.uk. The buddies show up and I can text chat with them but the buttons for audio and video are greyed out. I have usually use a wireless router with NAT and have played with port forwarding. As an exercise I have tried connecting to the internet via my mobile phone (no NAT) and the results are the same. I am not using the firewall on the Mac.
There are no hardware problems I am aware of, the built-in iSight camera works within iChat etc.
Any help would be appreciated.

Hi Jan,
Rocky's answer is the correct one.
I must admit I am not even sure you were addressing him though as you post looks like a strange ramble and looks like you signed it as Rocky as well.
iChat to iChat over Jabber names is possible as both ends will use the iChat way of doing Video (or Audio) chats.
iChat to another Jabber app will not do Video (Audio) chats.
The only App on a PC that Might be technically capable is Trillian as it does Jabber and AIM. However there seems to be no way to get it's Jabber side to invoke the AIM A/V features to match iChat.
5:32 PM Sunday; March 25, 2007

Syncing audio and video with timecode

What is the best way to sync audio and video files from a one camera shoot on which the camera was jammed with timecode from the mixer? Is there a batch method? Is it best done with a third party application or within Premier?
Camera is Canon C300
Adobe Premier Pro CC
Windows Operating system
The project is a 15 page short film shot over four days. Lots of dialogue.
Any help would be greatly appreciated.

Is "merge assets" different from "merge..."? I see the timecode option in "merge...".
Thanks

Scripting: How To Tell Between Audio and Video Track?

When I create a collection of tracks from the main library and iterate through them, I get everything (in my case, video and audio tracks - no podcasts or TV shows as of yet). In checking the "Kind" class, they all have a value of "1".
How can I tell if a track I'm looking at is audio or video? Also, when I do start downloading podcasts and/or TV shows, is there a way to differentiate them also?
Thanks

chillpill
**** so much for that on the Western Digitals. The interface is USB3
goodness, yes, youve got one of those OLD WD drives that has the controller board AND USB all as ONE SINGLE UNIT
write that HD off.
your "classique" HD here:
http://karlsbakk.net/bilder/WD10TMVW/wd10tmvw-2.jpg
tjk Wisconsin
So being USB3 doesn't tell us anything at all.
Yeah it does, it tells me its one of those OLD HD that was made with the "lets save 2 cents and make it all one piece" philosophical designs.

How to achieve streaming audio and video with SBS 2003

Similar Messages

Maybe you are looking for